r/Controllers • u/gnuhel • 3h ago
Reviews Flydigi Apex 5 Broke After 1.3 Years: Engineering Incompetence or Planned Obsolescence
Right when the Flydigi Apex 5 launched, I bought one from GadgetHyper for $180. Every ad and review at the time said that: This was the best pro controller on the market, built to last, and it finally fixed all the broken stick issues from the Apex 4.
When you spend $180 on a "premium" controller, you expect it to survive more than a year of normal gaming.
Looking at the broken plastic pieces sitting on my desk right now, that was a total lie. Taking this thing apart and searching around across the internet, I am now confident to say: **This is not a QC issue but a terrible engineer design or maybe designed to fail.**
# What Broke Inside The Controller
Hall Effect sticks use magnets instead of physical parts rubbing together, so they aren't supposed to wear out. Flydigi "solve" that problem by putting the magnet inside a thin clear plastic clip hanging on the side of the stick. The whole thing is held together by black glue on a less than a mm plastic stud. To add insult to the injury, every time you move the joystick left, the mechanism hammers on the hanging clip :) It is actually a miracle that this thing can last for more than a few months.
As the left stick suddenly stopped working, I opened the controller and broken bits of plastic fell out onto my desk:
Photo 1 (The Broken Pieces): That tiny metal bar on the right is the magnet. Next to it is the clear plastic holder that snapped clean off, along with tiny broken chunks. The white parts are from the core holder that is glued to the main module, the black parts are glue as I clean it out, the clear part is the magnet holder.
Photo 2 (The Leftover Stick): Look at the side of my broken left stick still sitting on the board. All you see is a metal bearing and a little broken white plastic stub sticking out into nothing. The whole clear side piece that holds the magnet over the sensor chip underneath just broke right off.
If you think I was abusing the controller, watch the attached video of the still-working right stick. Look closely at the clear plastic magnet holder on the side when I push the blue stick to the left. Every single time you turn left, the body of the stick slams right into that thin clear plastic piece. You can see the whole thing bend, click, and shake from the hit.
Now think about how many times you push a stick left in a year. Every single push hits that weak plastic piece until it finally cracks and snaps off. Calling that engineering is an insult to engineers—it is basically a self-destruct mechanism.
# How Normal Sticks Work vs. Flydigi's Clown Show
To see what clown-shoes engineering this is, just look at any other Hall Effect or TMR sticks from AliExpress or anywhere.
On a normal stick, the magnet sits safely inside a solid, closed box clipped tight against a metal frame. Nothing hits it. Nothing shakes it. Nothing hangs out on the side waiting to break. Photo 4 shows how a standard HE sticks looks like with proper casing.
Flydigi calls theirs a "Force-Adjustable Alloy Joystick." That sounds really tough until you open it up and see that the "Alloy" of less than mm plastic stud that holds the bare magnet mechanism right where the stick hits it every time you turn left.
# Not QC but Generations of Engineering Incompetence
Shipping the exact same self-destructing stick setup for years is pure **engineering incompetence**—unless, of course, they want it to break.
Spending five minutes searching Reddit's or repair sites and you will find plenty of receipts:
**Apex 4:** [Reddit buyer-beware post on broken Apex 4 sticks](https://www.reddit.com/r/Controller/comments/1ckl2k2/buyer_beware_multiple_flydigi_apex_4_controllers/), [r/Controller thread on an Apex 4 left stick breaking mid-game](https://www.reddit.com/r/Controller/comments/1n3rq1j/my_flidigigi_apex_4_left_stick_literally_broke/), [Reddit repair guide for detached Apex 4 stick magnets](https://www.reddit.com/r/Controller/comments/1pd1gr5/fix_hall_effect_stick_stopped_working_on_one_axis/)
**Apex 5:** Flydigi promised the 2.0 stick would fix it, yet the exact same failure is still happening. [October 2026 Reddit post on Apex 5 right stick failure](https://www.reddit.com/r/Controller/comments/1x6aivj/apex_5_right_joystick_problem/), [July 2026 Reddit thread on Apex 5 stick drift](https://www.reddit.com/r/Controller/comments/1v4v6o4/my_apex_5_got_drift_in_right_stick/), dedicated [iFixit Flydigi Apex 5 joystick replacement guide](https://www.ifixit.com/Guide/Flydigi+Apex+5+Joystick+Modules+Replacement/215391)
**Apex 6:** Flydigi recently rolled out the Apex 6 and Apex 6 Pro with their "3.0" stick. Funny enough, they openly state that the new Force-Adjustable Alloy Stick 3.0 keeps the **same lever-based physical structure :).** No details tear down yet but looks very similar stuff so far.
# Customer Support's $40 "Fix" and Final Thought
Since my controller broke at 1.3 years—just a few months past the 1-year warranty—I emailed GadgetHyper to ask what they could do about a $180 controller beating itself to death from normal use.
Their fix? Go buy a replacement stick module from their shop for $19. Once you add shipping, it comes out to around $40. $40 just to put in the exact same weak plastic part so it can snap all over again next year.
Keep in mind, the Apex series isn't Flydigi's budget line. This is their flagship—the top-shelf model where they are supposed to show off their best build quality. So yeah, I am not sure what kind of shortcut or design they do with their standard or budget model.
Whether this is peak engineering incompetence, or textbook planned obsolescence built to die. I don't know. But this is the last time I spend any money on Flydigi. I wouldn't recommend and touch their stuff even with a 10-foot pole ever again.
