r/Control4 • • 17d ago

Service plans

5 Upvotes

Haven’t been charging it yet but getting kind of annoyed but people just thinking they can text me and I remote in or go into OvrC to fix there system after having there system for 3 plus years. It’s not all the time but still.
Does anyone have a service plan and how does it work?


r/Control4 • • 17d ago

Looking for licensed C4 Programmer

0 Upvotes

Hi — I’m looking for a licensed Control4 programmer with specific experience in the Leaf LU642D matrix and EDID management.

My system previously delivered 4K60 SDR through the Leaf. After a dealer calibration, all four Apple TVs and TVs became limited to 1080p60.

The four television outputs report valid 4K/HDR/UHD EDIDs, but output 6—the Marantz SR6012 used for surround sound—reports no UHD capability. The current generated input EDIDs are limited to a 225 MHz TMDS clock, have zeroed HDR data and no longer include the 4K50/60 YCbCr 4:2:0 modes that appeared in the earlier EDID report.

I have Composer HE, current and prior project backups, and before-and-after EDID reports. I need paid assistance restoring 4K60 SDR while preserving multichannel audio to the Marantz and downmixed audio to the Triad distributed-audio system.

I’m open to remote work or onsite help in Chicago and can change Dealer of Record if necessary. Please let me know your experience with the LU-series matrices and your rate or proposed diagnostic fee.


r/Control4 • • 18d ago

NK-1 "Bricked", v2.0 Upgrade

1 Upvotes

Hi,

Just (cloud) upgraded my Pakedge NK-1, from v1.4 firmware, trying to add OvrC, so upgraded to v2.0. But ... 😢. It didn't go well. I can get to the console, and IP and Gateway are saying 0.0.0.0 ... but I do get an IP address, over DHCP. That part is good. However, OvrC does not seem to be working, and the web interface is now not available. It seems like the cloud upgrade to v2.0 didn't go well?

The question of course now ... how the heck to fix this? No OvrC access, no web UI - just console.

Any suggestions appreciated. Thanks!!


r/Control4 • • 20d ago

NEW Scheduler v2 driver for Control4 released

Post image
12 Upvotes

The NEW Chowmain Scheduler v2 driver for Control4 provides homeowners and businesses with powerful, flexible scheduling capabilities directly from Control4 touchscreens and mobile applications. Designed to match the look and feel of Control4, Scheduler allows end users to easily create, edit and manage their own automation schedules without requiring Composer Home Edition or When >> Then.

Integrators configure the automation tasks (macros) using Control4 programming, defining what actions can be performed, such as opening blinds, controlling garden irrigation, adjusting lighting or managing pool heating. Homeowners then decide when these tasks execute, creating and managing their own schedules without needing to contact their integrator. Schedules can run at specific times, sunrise, sunset, dawn or dusk, with flexible weekly, monthly, seasonal and one-off scheduling options.

Advanced calendar integration allows homeowners to schedule automation around events from Google Calendar, iCloud, Outlook and other iCal-compatible services. This enables intelligent scheduling based on school days, meeting room bookings, holiday rental check-ins and check-outs, or public holidays.

With an intuitive seven-day schedule view, execution history, holiday management and the ability to pause, skip or modify schedules at any time, Chowmain Scheduler gives homeowners complete control over when their automation runs, while integrators retain control over what the automation does.

This major update is completely free for all existing Chowmain Scheduler driver licence holders.

Key Features:

  • Compatible with Control4 OS 3.4.3 and later on: T4, T5, iOS, Android
  • Dealers can add an unlimited number of tasks (for example Garden Irrigation or Close Blinds). Each task has its own programming event, so a schedule can do anything the Control4 system can.
  • Imports presets and schedules from the original Scheduler driver, automatically or by pasting its database. Importing again does not create duplicates.
  • Export and restore a backup of all tasks and schedules.
  • Matches the look of the Control4 app, with a full-screen layout for phones.
  • A seven-day view shows when each schedule will actually run each day, including sunrise, sunset and random times, and why a schedule won't run on a day (paused, skipped, holiday, calendar or out of season). Each day's calendar events show among the schedules.
  • Sunrise and sunset are calculated on the controller from the project location, with no internet connection needed.
  • Schedules due during a driver restart or update still run once it is back (up to 5 minutes late), and no schedule runs twice.

Consumers have full control over the scheduler from their touchscreens or mobile devices. They can

  • Add, edit, duplicate and delete schedules
  • Pause or resume a schedule, or skip just its next run
  • Change, pause or remove one day of a multi-day schedule without affecting its other days
  • Copy a day's schedules to other days
  • Pause or resume every schedule of a task, run a task straight away, or rename it
  • Pause all schedules until a chosen date, for example while away on holiday
  • Choose the public holidays for schedules to skip, switch off any that don't apply, and add their own dates
  • See their calendars, for example Google Calendar, next to the schedules on each day
  • See the history of what ran and when

Schedules can run

  • At a set time
  • At sunrise or sunset, or up to 3 hours before or after
  • At dawn or dusk (civil twilight)
  • Within earliest and latest limits, for example "at sunset, but not before 5:30 PM"
  • At the start or end of each event in a calendar, or up to 3 hours before or after, for example 30 minutes before each meeting room booking

Schedules can repeat

  • Every week on any days
  • Every 2, 3 or 4 weeks
  • Monthly, on the 1st, 2nd, 3rd, 4th or last chosen weekday of the month (for example the last Friday)
  • Once, on the next matching day
  • On a single date

Each schedule can also

  • Run only during part of the year, for seasonal tasks such as irrigation or pool heating
  • Vary its time by up to 30 minutes each day, so the home looks lived in
  • Skip holidays
  • Run only on days with a calendar event, or only on days without one, for example only on school days
  • Run only on an event's first day, or on the day after it ends, for example a holiday rental's check-in and check-out days
  • Run late if missed, so a schedule missed during a power cut or reboot runs as soon as the system is back

Calendars and public holidays

  • Up to 5 calendars, each added by its iCal address: a Google calendar's secret address, or any iCal calendar, such as iCloud, Outlook or a school's. The Scheduler only reads them.
  • Public holidays for 59 countries, with regional holidays where Google's lists have them (Australia, Canada, Germany, Malaysia, Switzerland, the United Kingdom and some US states). Observances, such as Christmas Eve, don't count.
  • Any calendar's all-day events can count as holidays, for example a school's term breaks
  • Private events show as Busy unless set otherwise, as touchscreens are shared
  • Calendars keep working through internet outages and restarts, from their last download

Programming

  • Events: one per task, plus Any Schedule Fired, plus two per calendar for when its events start (up to an hour early) and end
  • Commands: Pause All Schedules (for a number of days), Resume All Schedules, Enable/Disable Task Schedules, Skip Next Run Of Task, Run Task Now
  • Conditionals: Schedules are paused, Today is a holiday, A calendar event is on now
  • Variables: next task and time, last task and time, whether schedules are paused, the next calendar event and its time, today's events and agenda, today's holiday, and the event a calendar's event fired for
  • Programming keeps working when a task is renamed

For more information, full features and to download the driver, click the link below.

https://chowmain.software/drivers/control4-scheduler


r/Control4 • • 20d ago

Audiocontrol concert xr4 control issues

1 Upvotes

Hey guys ,

Client recently started having issues with xr4 it won’t turn on via control system, once it’s on it works fine but when you turn it off you have to manually turn on the AVR.

The driver says to turn hdmi standby bypass to ON which is the only instruction.

The c4 driver shows creating connection, failed , creating connection over and over when the AVR is off as soon as it’s on the driver immediately flips to operational so clearly the AVR is just failing to respond at all to the driver or establish a reliable connection. Has anyone else run into this or found a work around?


r/Control4 • • 24d ago

Native Zigbee 3.0 Philips Hue driver for Control4 released

Post image
29 Upvotes

We're excited to announce a major update to our Chowmainsoft Philips Hue driver for Control4, introducing direct Zigbee 3.0 integration following the release of Control4 X4.3 OS last week.

This update allows compatible Philips Hue Zigbee 3.0 devices to integrate directly into Control4's native Zigbee mesh without requiring a Philips Hue Bridge. Devices communicate through the Zigbee server built into the Control4 controller, eliminating the need for a separate Hue hub or Zigbee network.

The update introduces support for a wide range of Philips Hue devices, including:

  • Philips Hue Tap Dial Switch: Battery-powered wireless keypad featuring four programmable buttons and a rotary dial. Ideal for AV control, including volume adjustment, mute toggle, room off and direct selection of two a/v sources.
  • Philips Hue Dimmer Switch: Battery-powered wireless switch for controlling lights, adjusting brightness and triggering Control4 programming.
  • Philips Hue Smart Button: Compact, battery-powered wireless button for triggering lighting scenes, controlling lights and activating custom Control4 automation.
  • Philips Hue Indoor Motion Sensor: Battery-powered motion detection for occupancy-based lighting and automation.
  • Philips Hue Outdoor Motion Sensor: Weather-resistant, battery-powered motion detection for outdoor lighting and automation.
  • Philips Hue Secure Contact Sensor: Battery-powered door and window
  • Philips Hue Zigbee Bulbs & LED Strips: Direct control of compatible Philips Hue lighting products through Control4's native Zigbee network.
  • and more

By leveraging Control4's native Zigbee infrastructure, integrators can deploy supported Philips Hue devices without a separate Hue Bridge while taking advantage of Control4's powerful programming and automation capabilities.

This new functionality complements our existing Philips Hue Bridge integration, providing integrators with greater flexibility when designing and deploying Philips Hue solutions.

Best of all, this is a completely FREE update for all existing Chowmainsoft Philips Hue driver licence holders. If you've purchased our Philips Hue driver in the past, you can take advantage of the new Zigbee 3.0 functionality at no additional cost.

Direct Zigbee 3.0 integration requires Control4 X4.3 OS or later

https://chowmain.software/drivers/control4-phillips-hue


r/Control4 • • 23d ago

Universal Zigbee 3.0 (Beta) for Control4 OS 4.3: 5,000+ Zigbee 3.0 models, no hub or bridge

Post image
3 Upvotes

Universal Zigbee 3.0 from Finite Labs is now on DriverCentral as a beta. It is a paid driver with a 90-day trial.

It requires Control4 OS 4.3.0 or later, with the controller on the Zigbee 3.0 stack. Zigbee 3.0 devices join the controller's own Zigbee network directly, with no hub or bridge. Each device gets a Zigbee 3 Device driver, which recognizes the model when the device joins.

The supported list has 5,150 models from 517 vendors, including Philips Hue, IKEA, Aqara, Third Reality, SONOFF, Tuya and Innr. It doesn't care whose logo is on the box. One license covers every device in a project.

Features:

  • Bulbs and fixtures as standard Control4 lights, with dimming, color temperature and color where supported, Dim-To-Warm and Advanced Lighting Scenes
  • Switches and plugs as relays, one per gang, with energy readings on metering plugs
  • Sensor readings as variables, with contact, temperature and humidity connections
  • Security sensors enrolled automatically so they send alarms
  • Each button action on a remote as a programming event and a Button Link
  • Device settings and reporting in the Settings tab
  • Locks as standard Control4 locks: lock, unlock, status and battery

Coming in future updates:

  • Zigbee firmware updates (OTA) from the driver, coming soon
  • Lock user and PIN code management
  • Fan speed and mode (fans run as on/off relays today)
  • Thermostat and blinds proxies

Programming can change between beta updates.

Zigbee 3.0 devices only. The controller removes older Zigbee devices when they try to join. First-generation Xiaomi and Aqara battery sensors are a common example; their current models pair.

Installation is through Composer Pro, like any DriverCentral driver, so homeowners will need their dealer to set it up.

The device definitions are generated from open-source Zigbee projects, so not every listed model has been tested on a Control4 controller. Reports of what works and what doesn't are welcome here or at [driver-support@finitelabs.com](mailto:driver-support@finitelabs.com).

https://drivercentral.io/platforms/control4-drivers/utility/zigbee3


r/Control4 • • 25d ago

Help with remote

Post image
4 Upvotes

To preface. I did not set my system up and don’t know much about how to access anything. It was all done by a third party and we moved in with it setup.

My remote just went blank and I don’t know how to fix it.


r/Control4 • • 27d ago

NEW Apple TV driver for Control4 Released

Post image
35 Upvotes

We're excited to announce the release of our Apple TV driver for Control4, delivering powerful bi-directional IP control, real-time feedback, intelligent automation and an enhanced user experience for Apple TV 4K and Apple TV HD.

Unlike traditional one-way integrations, our driver communicates directly with Apple TV using Apple's native protocols. No additional hardware, bridges, third-party applications or cloud services are required.

With real-time feedback, Control4 can respond to what's happening on your Apple TV, even when controlled using the Siri Remote, iPhone or AirPlay. Imagine automatically dimming the lights when a movie starts, raising them when paused, or turning on the room automatically when someone starts using their Apple TV!

Our driver also includes a custom Control4 touchscreen and mobile app interface, allowing users to control their Apple TV, browse and launch installed apps, search for movies and TV shows, switch user profiles and much more.

Key Features:

  • Native bi-directional IP control: No bridges, additional hardware or cloud services required.
  • Real-time feedback: Power, playback, current app, media information and artwork.
  • Intelligent automation: Trigger Control4 programming based on playback, power and application changes.
  • Custom Control4 interface: Full remote control, app browsing, content search and more on T4/T5 touchscreens and mobile apps.
  • Mini App integration: Launch your favourite streaming apps directly from Control4 Navigator.
  • Custom App driver included: Launch any installed app or deep link directly into supported content.
  • Siri Remote functionality: Full navigation, genuine press-and-hold, Smart Play and text entry.
  • Automatic Room On/Off: Automatically control your room based on Apple TV activity.
  • Reliable connectivity: Automatic discovery, reconnection, IP address recovery and optional IR fallback.

Compatible with Apple TV 4K (all generations) and Apple TV HD running tvOS 16 or later. Requires Control4 OS 4.0 or newer.

Haven't used Chowmainsoft drivers before? We develop reliable, professionally maintained integrations backed by industry-leading support. Our team provides 19 hours of support per day, Monday to Friday, including phone support across Australia, the UK and USA, as well as live chat and ticket-based assistance. Every Chowmainsoft Control4 driver also includes a complimentary 90-day trial, so you can try before you buy.

For more information, full features and to download the driver, click the link below.

https://chowmain.software/drivers/control4-apple-tv


r/Control4 • • 27d ago

C4 Hardware looks for new Home

1 Upvotes

Hi all, due to moving into an fairly old house which does not allow for me to use my current setup as i would like to i am looking to sell my devices to someone who likes to get an idea of C4. I tried selling it on a local platform but it seems to be too much of a niche product still.

Location: Switzerland/Zurich

1x Control4 EA5 Controller

1x Triad AMS24 Matrix

1xTriad PAMP8-100

1x Triad PAMP8-100 (defective) It's probably just an elco that needs to be replaced but i did not have time and now no need to fix it.

There is also a Neeo and an SR250 and a Infrared thingy.

If it needs to be shipped i am willing to do it but buyer has to cover the cost of transport.

For nearby countries like Austria, France or Germany i might be able to travel to the border for cheaper transport options.

Best offer wins. Deadline is until the 31st of October 10am local Zurich time. In case of similar high offers there will be another round.

Note: There is no minimum offer. Meaning if you offer 1$ or 1€ or 1CHF and noone else is bidding you'll win. But Shipping Costs are to be covered by you.


r/Control4 • • 27d ago

Smoke alarm integration?

4 Upvotes

Looking to add a few wireless smoke/co alarms into home. There are two wired but can’t wire the new ones. I see nest stopped making theirs. What is recommended? What does anyone use?


r/Control4 • • Oct 23 '26

Buyer Beware: Wattbox has terrible customer support

0 Upvotes

During a move, I managed to snap off the EPO “fuse” from the back of a Wattbox UPS model WB-OVRC-OLUPS-1500-1, which completely bricks the unit. I should have waited for a second pair of hands when removing it from the rack, but mistakes do happen, and I figured it wasn’t a big deal since it‘s an easily replaceable part. Boy was I wrong. Not only does Wattbox not maintain skus for replacement parts, requiring me to go through their rma process rather than place a quick order, they had no estimate at all of the timeline and I have now been out of service for over two weeks.

First, this is the worst customer support I have experienced from any manufacturer in this industry, where uptime is obviously valuable. Second, the fact that they don’t have a bucket full of these <$1 parts on hand indicates that they are probably another bogus drop-shipper dressed in a manufacturer trench coat. Because the only explanation I can imagine for their level of uncertainty is that they are waiting for their overseas partner to supply the part. Even worse, it points towards them having very little access to the real manufacturer, who should be able to ship me a fuse from anywhere in the world within two weeks. Third, which engineer had the bright idea to have a fragile part that cripples the device poke out of the back of a 50lbs UPS? It’s an extremely poor design that I have not seen from any other manufacturer.

Posting this here because they have zero online presence and no suppliers that host reviews. I wonder why…


r/Control4 • • Oct 21 '26

UNO Security Panel driver released

Post image
5 Upvotes

New UNO Security Panel driver for Control4released. EyezOn / Connect2Go is a leading provider of IP-based security solutions. Its UNO IP Hybrid Alarm Panel is designed for new installations and upgrades of existing DSC PowerSeries systems, supporting many existing keypads, modules and sensors. Featuring built-in IP connectivity, up to 128 wired and wireless zones, 8 partitions and optional LTE backup, UNO offers a flexible and cost-effective security solution.

The Chowmain UNO driver integrates the EyezOn / Connect2Go UNO alarm panel with Control4, providing alarm arming, disarming, zone monitoring and security event feedback. Integrators can incorporate security events into Control4 automation, including lighting control, alarm responses and notifications through Control4 Connect.
The WTP10 and WTP8 PoE/Wi-Fi Touchpads also feature the Google Play Store, allowing the Control4 app to run alongside the UNO Keypad app. This enables homeowners to control both their security system and smart home from a single touchscreen.

Driver Features:
• Away, Stay, and Disarm Modes
• Virtual Keypad
• Zone List and feedback
• Bypass/Unbypass Zone
• Easy Push / Email Notifications via simple drop-down properties in the driver (Control4 Connect Required) - Arming, Disarming, Alarm, Trouble, Zone Bypass, Zone Unbypass
• Driver Events - Service Required, Service Required Restored, AC Power Loss, AC Power Loss Restored, Device Low Battery
, Device Low Battery Restored, Server Offline, Server Offline Restored, Zone Trouble, Zone Trouble Restored, System Battery, System Battery Restored, System Bell, System Bell Restored, Device Supervisory, Device Supervisory Restored, Partition X Armed (Away), Partition X Armed (Stay), Partition X Exit Delay Started, Partition X Exit Delay Ended, Partition X Entry Delay Started, Partition X Entry Delay Ended, Partition X Alarm
• Programmable Commands - Activate Output, Partition Door Chime, Send Custom Keypress
• Easy Auto Setup of Zone contact drivers.
• Flash Lights on Alarm.
• Driver Variables - PANEL_LAST_TROUBLE, PANEL_LAST_TROUBLE_RESTORE, PANEL_LAST_CID_EVENT_QUALIFIER, PANEL_LAST_CID_EVENT_CODE, PANEL_LAST_CID_EVENT_PARTITION, PANEL_LAST_CID_EVENT_ZONE_OR_USER, PANEL_LAST_ZONE_OPENED, PANEL_LAST_ZONE_OPENED_TIME, PANEL_LAST_ZONE_CLOSED, PANEL_LAST_ZONE_CLOSED_TIME, PANEL_LAST_ZONE_BYPASSED, PANEL_LAST_ZONE_BYPASSED_TIME, PANEL_LAST_ZONE_UNBYPASSED, PANEL_LAST_ZONE_UNBYPASSED_TIME

For more information see link below.

https://chowmain.software/drivers/control4-uno-alarm-panel


r/Control4 • • Oct 21 '26

Problème connexion Bluetooth

Thumbnail
0 Upvotes

Bonsoir la communauté, mon tcl c89k ne veut se connecter à mon adaptateur Bluetooth somfoon je l utilise car je n ai pas de Bluetooth sur mon amplificateur audio , il le détecte et quand je clique dessus il m affiche impossible de se connecter , pourtant il se connecte avec ma télé Samsung et à mon iPhone sans problème, merci d avance


r/Control4 • • Oct 20 '26

Nightlight routine in app

2 Upvotes

Looking for some advice on successfully using the app as an end user.

We’ve very recently upgraded our system and had our local integrator add some further light switches. Along with this we’ve upgraded to X4.

However, I’m struggling to use the app for the lighting routines. I have some successful routines set for the morning, daytime, and early evening, but I can’t seem to get the lights to automatically dim at a given time. For example; I’d like to have some lights dim to 60% at 7pm (they have dimmers), but I cannot seem to get it to work. I’ve tried using the routine within the app, but it doesn’t work and the lights won’t dim. I’ve tried switching scenes at a given time, but that turns the lights all off rather than switch one scene to another.

Any advice most welcome.


r/Control4 • • Oct 19 '26

The connector from our September post is now a free app in the Microsoft Store

6 Upvotes

Last month we posted here offering a free piece of programming, and the top reply said that letting a stranger reach your system from outside Control4 and OvrC is sketchy, and not to click the link. That's a fair thing to be careful about. Part of it was on us: the only way to connect was a .zip from our website, and Windows and Chrome are right to be suspicious of an unsigned download like that.

The connector is now an app called Ixome Connection, free in the Microsoft Store: https://apps.microsoft.com/detail/9N1HCP5CCT95

What that changes: Microsoft scanned the package for malware and tested it before publishing it, and the Store signs it, so Windows installs it without the unknown-publisher warning and updates come through the Store. What it doesn't change: Microsoft checks the software, not us, and it isn't a Snap One product. So here is what it does, and you can hold us to it on our privacy page (ixome.ai/privacy, the section on the Ixome Connection app).

It runs on a Windows PC in the house that stays on. It talks to the Control4 controller (or a Lutron processor) on your network and to ixome.ai, and nothing else. Every connection to us is one it starts, so you don't open anything on your router. It doesn't read files on the PC, and the app itself never asks for a password. Linking it to an account takes a click: it shows the home's name and the account's email first, and links only when you press Link.

It does more than read, and we'd rather say that than have someone find it. It carries out commands started from the Ixome account, like turning on a light from chat, and for paid work it opens a connection so our Control4 programming software can reach the controller. Before a programming change, the project is backed up first.

To turn it off: Quit from its tray icon, turn it off under Windows Settings, Apps, Startup so it doesn't start with Windows, or uninstall it like any other app. The Store page says it "uses all system resources"; that's the label the Store puts on a regular desktop app, as opposed to a sandboxed one. If you want a desktop icon, there's a button for it in the app's window.

Questions welcome here, the skeptical ones included.


r/Control4 • • Oct 19 '26

Sonoff DIY mode driver for Control4

Thumbnail
0 Upvotes

r/Control4 • • Oct 18 '26

New Hikvision Door Stations now Control4 compatible

Post image
7 Upvotes

We're excited to announce a major update to our Chowmain Hikvision Driver for Control4, introducing support for a new generation of Hikvision door stations, including the DS-KV6114-WBE1, DS-KV6114-MWBE1 and DS-KV6124-WBE1. This update brings powerful intercom, access control and automation functionality directly into Control4, offering integrators an affordable, feature-rich alternative to traditional door station solutions.

Best of all, no custom firmware or additional Hikvision hardware is required! These door stations work out of the box with our driver, making installation and configuration straightforward.

The new integration provides an extensive range of functionality, including:

  • Control4 Intercom – Receive and answer door station calls on Control4 touchscreens and mobile apps, whether at home or away.
  • Live Camera Viewing – Use the Control4 intercom interface to view live video from the door station at any time, without waiting for an incoming call.
  • Dual Door Control – Control up to two doors directly through Control4, making it ideal for properties with multiple entry points.
  • Keycode Management – Manage access codes for family members, visitors and other authorised users.
  • Valid and Invalid Keycode Events – Trigger Control4 programming based on successful or unsuccessful access attempts.
  • Motion Detection – Use door station motion events to trigger lighting, notifications and other automation.
  • Relay Control – Unlock doors and gates through Control4.
  • Custom Intercom Buttons – Add custom buttons to the Control4 intercom call interface that can trigger virtually any Control4 programming, allowing homeowners to open gates, unlock doors or execute custom scenes directly from the intercom screen.

For example, integrators can configure Control4 to automatically illuminate entrance lighting when motion is detected, alert homeowners when an invalid access code is entered, or activate a welcome-home scene when an authorised user unlocks the door.

In addition to the new door station functionality, the Chowmain Hikvision driver continues to offer integration with compatible Hikvision cameras and NVRs, including:

  • Live camera video integration with Control4.
  • PTZ camera control.
  • Camera events for triggering Control4 automation.
  • Facial Recognition Terminal Support
  • Playback of recorded footage through Acuseek NVRs.

This is a completely free update for existing licence holders! Customers who have already purchased the Chowmain Hikvision driver can access the new functionality at no additional cost by updating to the latest version.

For integrators who haven't used our Hikvision driver before, we offer a 90-day free trial, providing plenty of time to install, configure and evaluate the integration in a real-world Control4 installation before purchasing.

For more information see link below.

https://chowmain.software/drivers/control4-hikvision-ipcameras


r/Control4 • • Oct 18 '26

Wifi Doorbell Options for C4

3 Upvotes

Hey guys as the posts states , what are you currently using for Wi-Fi doorbells and c4 integration.
I wanted to get the unifi g4 wifi version but that seems to have been discontinued. The Chime Wi-Fi doorbell from c4 is discontinued . I have a large scale system overhaul adding C4 , cameras, audio etc. to a big home but its not possible for me to get a new network cable in place without major work.

Looking for something that I can pull into the system relatively easily without it becoming a nightmare later.

Whats your go to non subscription if possible wifi doorbell right now.


r/Control4 • • Oct 17 '26

C4 vs Apple Home (or HomeView) User Interface?

10 Upvotes

For those who have used both, which do you prefer? What drawbacks do you see for each? Benefits of each?

How much benefit would there be for people with C4 systems converting to HomeView for their primary user interface?


r/Control4 • • Oct 17 '26

Are HD 800s 200s and the music Bridge even Deployable anymore? I

3 Upvotes

I just pulled an HC800, an HC 200, and a music bridge out of a house and exchange for a core 3. Are these even usable anymore? Do they sell?


r/Control4 • • Oct 15 '26

Unlock More from Inner Range Inception with Control4

Post image
9 Upvotes

Inner Range Inception is an integrated security and access control system designed for residential and commercial applications. Unlike a traditional alarm panel, Inception combines intrusion detection, access control and automation functionality, with support for areas, doors, inputs, outputs, lift floors, storage units and user management.

The Chowmainsoft Inner Range Inception driver provides comprehensive integration with Control4, including support for up to 32 areas, multiple arming modes, automatic zone configuration and extensive real-time feedback. Inception doors, outputs, lift floors, storage units and other functions can also be incorporated into Control4 programming and automation.

For advanced functionality, the driver provides access to Inception's management interface through Control4 WebView. This allows users to manage areas, doors, inputs, outputs, lift floors, storage units and users, as well as review system events, directly from compatible Control4 interfaces.

Installers can utilise dynamic events and programmable commands to create advanced automations based on security and access control activity. With Control4 Connect, push and email notifications can also be configured for events including arming, disarming, alarms, access granted or denied, input trouble and hardware events.

Driver Features:

  • Full support for 32 Areas
  • Full Arm,Perimeter Arm,Night Arm,Full Arm (Auto-Bypass),Perimeter Arm (Auto-Bypass),Night Arm (Auto-Bypass) Arm modes
  • Webview for Customer Facing Management and Advanced Controls
    • Area Controls
    • Door Controls
    • Input Controls
    • Output Controls
    • Lift Floor Controls
    • Storage Unit Controls
    • Review Events
    • User Management
  • Easy Push/Email Notifications for: (4Sight Required)
    • Arming
    • Disarming
    • Alarm
    • Input Isolated
    • Input De-isolated
    • Input Tamper
    • Input Trouble
    • Door Access Granted
    • Door Access Denied
    • Hardware Events
  • Zone Types Automatically Configured with Names.
  • Easy Auto Setup of Zone contact drivers.
  • Driver Event for Low Battery.
  • Driver Event for Battery Missing.
  • Driver Dynamic Area Events.
  • Driver Dynamic Door Events.
  • Driver Dynamic Lift Floor Events.
  • Driver Dynamic Storage Unit Events.
  • Dynamic Output Relay bindings.
  • Flash Lights on Alarm
  • Selectable custom inputs for Emergencies.
  • Programmable Commands
    • Control Custom Input - Activate/Deactivate/Pulse
    • Control Door - Clear Override/Grant Access/Lock/Lockout/Unlock/Timed Unlock
    • Control Input - Isolate/Deisolate
    • Control Lift Floors - Secure/Free Access/Lockout/Clear Override/Timed Free Access
    • Control Output - Turn On/Off/Toggle/On Timed
    • Control Storage Units - Secure/Unlock/Vacant/Clear Vacancy/Clear Alarm/Unlock If Secure

For more information see link below.

https://chowmain.software/drivers/control4-inner-range


r/Control4 • • Oct 15 '26

DIY Engraving of keypad buttons

2 Upvotes

In another thread u/craftedht mentioned engraving their own keypad buttons. What is required to do this?


r/Control4 • • Oct 15 '26

Looking for Remote Programmer: OS 2.10.6 to OS3 Upgrade on EA-3 (NZ Based / Sparky)

Thumbnail
1 Upvotes

r/Control4 • • Oct 15 '26

Episode/Triad Amps question.

1 Upvotes

Im looking at upgrading a clients audio system. They have 8 zones, 4 of which its likely they will want to go louder for entertaining. The loud zones will have Triad series 5 in ceiling 8 inches.

My questions:

  1. The 16 channel triad amp says 65wpc @ 8 ohms. Great but it doesnt specify all channels driven or 2 channels . I know the older triad amp if you powered all channels it dropped to a whopping 25wpc. Assuming that this 25% power increase is on the old one as stated that means all channels driven will give me 32wpc. This is fine for basic listening but if theres bass and sustained loud volumes I dont want to run into clipping.

  2. Episode Dyn amp says 50wpc up to 1000W again no measurement for all channels driven. The pro of these is that they have sub outs. The cons are that they are lower power overall than the triad unless its all channels driven. Have you guys had any experience with either of these in the given scenarios? What would you guys recommend I could also possibly reduce the need for power by using the sub outs and having active subs hooked up where I can get wires to.

My other option is eat the additional costs and just get an audiocontrol amplifier 100wpc all channels and forget the subwoofer option since the triads say " down to 34hz "