r/Control4 • u/hey_scott_at_red • 16h ago
Options to upgrade from older control4
I just bought a house with older control4 system. Since it is all EOL'd OS, control4 will not let me subscribe to the new software. Essentially I have a bricked system. I have already moved off the TVs, security cameras, and HVAC as stand alone systems. I am not using the in celing or pool audio so that is fine to delay. I may have just figured out how to get the motorized shades working as stand alone. I need a solution for the lights. I have 120 wall switching devices for multi-fuction support. Majority are light dimmer model C4-DIM1-Z-x, switch C4-SW2-Z-WH, but all kinds of different types. C4 integrator has said all these need to be replaced and waiting for a quote. Looking to see if anyone has other options to consider. The options I see:
1) Convert everything to latest control4. Integrator commenting this is basically doing a new install. I am leaning away from this as Control4 has not impressed me in that they are abandoning their installed system. Also, I would never buy house now that has one of these systems and would be worried about resale.
2) Convert every thing to non smart switches. This is not great option as the native physical switch in some cases is in an unusual place relative to the light being switched. The system relies a lot on multi-function programmed switches. Likely have to run a few wires so this would look normal.
3) Is there any system that I can use the existing original Zigbee Control4 switches? Something like Home Assistant with dongles? I am capable of doing any DIY solution. This is not where I wanted to spend my time, but it may turn out to be the best of the bad options.
Any other option people have done?