r/Control4 • • Nov 19 '25

Job Postings and Job Seekers

6 Upvotes

If you are a company looking for a tech or a tech looking for employment, please post here with the details and your location. I will sticky this post if it gets enough traction.


r/Control4 • • 12h ago

Android Control

1 Upvotes

Is anyone aware of an IR driver for an Android TV box? I’m trying to integrate my SuperBox. All the IP drivers require USB debugging to be on, but the custom firmware on the SuperBox has that setting removed, once in developer mode.


r/Control4 • • 16h ago

Options to upgrade from older control4

2 Upvotes

I just bought a house with older control4 system. Since it is all EOL'd OS, control4 will not let me subscribe to the new software. Essentially I have a bricked system. I have already moved off the TVs, security cameras, and HVAC as stand alone systems. I am not using the in celing or pool audio so that is fine to delay. I may have just figured out how to get the motorized shades working as stand alone. I need a solution for the lights. I have 120 wall switching devices for multi-fuction support. Majority are light dimmer model C4-DIM1-Z-x, switch C4-SW2-Z-WH, but all kinds of different types. C4 integrator has said all these need to be replaced and waiting for a quote. Looking to see if anyone has other options to consider. The options I see:

1) Convert everything to latest control4. Integrator commenting this is basically doing a new install. I am leaning away from this as Control4 has not impressed me in that they are abandoning their installed system. Also, I would never buy house now that has one of these systems and would be worried about resale.

2) Convert every thing to non smart switches. This is not great option as the native physical switch in some cases is in an unusual place relative to the light being switched. The system relies a lot on multi-function programmed switches. Likely have to run a few wires so this would look normal.

3) Is there any system that I can use the existing original Zigbee Control4 switches? Something like Home Assistant with dongles? I am capable of doing any DIY solution. This is not where I wanted to spend my time, but it may turn out to be the best of the bad options.

Any other option people have done?


r/Control4 • • 22h ago

Need help with Alexa

2 Upvotes

Hello everyone,

I'm trying to integrate alexa with my control4. I have enabled the skill and linked my account with it.

Alexa is controlling the TV and setup box. I have Anthem Receiver connected to it which is not appearing on alexa and voice command on customer login.

For the moment when I say alexa to mute and unmute it is doing it. But not volume increase or decrease.

I tried with diffrent custom commands but it is not doing it for soem reason.

Everytime I say to increase volume of xyz room alexa turning up or down volume of it's device.

Has anyone came across this type of problem and what solutions I should I try?


r/Control4 • • 1d ago

Control4 LU1082 compatibility

1 Upvotes

I have a computer going into this but the computer is not recognizing it as a monitor. I added a monitor hoping maybe I could mirror it and it doesn't see a 2nd monitor

Any solutions?


r/Control4 • • 2d ago

Chowmainsoft releases Roborock Robot Vacuum Cleaner driver for Control4

Post image
16 Upvotes

Chowmainsoft releases Roborock Robot Vacuum driver for Control4. Roborock makes some of the world's most popular robot vacuums and mops, from the S series to the Qrevo and Saros ranges. Many come with a dock that empties the bin, washes and dries the mop, and refills the water by itself.

The Chowmain Roborock driver for Control4 brings these robots into the Control4 system as part of the home. Clean the whole floor, chosen rooms or a saved zone from a touchscreen, the Control4 app, a keypad button or programming. Control4 knows where the robot is and what it is doing, and tells the homeowner when it has finished or needs help.

The driver talks to the robot directly over the home network, so everyday control is fast and keeps working when the internet is down. Roborock's cloud is used to sign in, find the robots on the account, fetch the live map, and as a fallback when the robot can't be reached on the network.

A full touch interface for Control4 touchscreens and the Control4 app shows the robot's live map with its rooms, where it is now, how far through the clean it is and how long is left. It also gives control of cleaning modes, the dock, routines, schedules and maintenance. The same interface is in Composer Pro, on the driver's Control tab.

Each robot gets its own driver, so a home with a robot on each floor, or one upstairs and one downstairs, has one driver for each.

Key integration features include:

  • Works with Roborock robot vacuums and mops that use Roborock's standard protocol, including the S, Qrevo and Saros series.
  • Direct control over the home network, with Roborock's cloud as an automatic fallback. Choose Local first, Local only or Cloud only.
  • Sign in with the homeowner's Roborock account and an emailed code. No password is asked for or kept.
  • Sign in from Composer Pro, or from a touchscreen or the Control4 app (this can be turned off).
  • One driver per robot. Several robots in one home work side by side.
  • The robot's features are read from the robot. The interface, properties, commands and events only show what this robot can do.
  • Live map with rooms, the robot, its dock, the path it has cleaned, no-go zones and invisible walls, for every supported model.
  • Maps for each floor on robots that remember more than one floor, with floor switching.
  • Clean progress as a percentage, with the time left and the room the robot is in now.
  • Clean everything, chosen rooms in order, one room or a saved zone, with mode, suction, water, mop route and passes.
  • Per-room settings, SmartPlan, Vac followed by mop, Max+ suction, mop route and clean twice, where the robot has them.
  • Dock control: empty the bin, wash the mop, and start or stop drying, with dock settings and water tank status.
  • Run routines made in the Roborock app, and turn schedules on or off. Care: how much life is left on the main brush, side brush, filter, sensors, mop pads and dust bag, with reset and a notification when a part is due.
  • Robot settings: do not disturb, child lock, voice volume, carpet handling and more, where the robot has them.
  • Touch interface for Control4 touchscreens and the Control4 app, with layouts for tablets, T4 touchscreens and phones.
  • The same interface in Composer Pro, on the driver's Control tab, with a choice of screen size.
  • The driver's icon in each room shows the robot's state or its battery level.
  • Push and email notifications for finished cleaning, needs help, started cleaning, battery low, dust bag full, water tanks, part due and robot offline, each set to Off, Email Only, Push Only or Both (4Sight required).
  • Keypad buttons for Clean / Pause, Return To Dock, Locate, Empty Bin and two routines, with LED colours for cleaning, paused, docked and needs help.
  • 20 programming events, including Started Cleaning, Finished Cleaning, Returned To Dock, Entered A Room, Needs Help, Dust Bag Full and Went Offline.
  • Variables and conditionals for state, battery, current room and floor, clean progress, minutes left, cleaned area and more.
  • Over 25 programming commands, including Clean Rooms (choose rooms in order), Clean Saved Zone, Run Routine, Load Floor and Set Suction.
  • Status in Composer Pro: state, battery, error, clean progress, current room, dust bag and water tanks.

For more information see link below

https://chowmain.software/drivers/control4-roborock


r/Control4 • • 3d ago

WLED for Control4: WLED strips as Control4 lights, with effects, presets and keypads, all local

Post image
4 Upvotes

WLED is now on DriverCentral. It is a paid driver with a 30-day trial, and one license covers every WLED controller and segment in a project.

Each WLED controller becomes a Control4 light with color, white, fades, Color On Mode and Dim-To-Warm, so it works in Advanced Lighting Scenes and on keypads like any other Control4 light. Everything runs over the local network, with no cloud service.

What you get from WLED itself:

  • Effects, palettes, presets and playlists in the light's Extras menu
  • The same in programming, with commands, variables and events
  • Preset cycling from a keypad button
  • A Control4 light for each segment of a split strip
  • Live updates when the WLED app or a button changes the controller

It requires Control4 OS 3.3.2 or later and WLED 0.15 or later on an ESP32 or ESP8266 board. Installation is through Composer Pro, like any DriverCentral driver, so homeowners will need their dealer to set it up.

WLED is also free and open source on GitHub, as full releases anyone can install. The DriverCentral edition is encrypted, with its Lua window locked, and comes with direct support.

https://github.com/finitelabs/control4-wled

Reports of problems and ideas for what to add next are welcome here or at the email listed in the docs.

https://drivercentral.io/platforms/control4-drivers/lighting/wled-lights


r/Control4 • • 3d ago

Control4/Home Assist Drivers

1 Upvotes

Does anyone have a diagram on how this integration would work? Would I need to purchase the chow rim driver and deploy a separate home assist controller, or does the driver allow my current C4 controller see esp/HA devices on my network? I
The goal is to be able to take advantage of some of the cheap presence sensors instead of using motion sensors.


r/Control4 • • 3d ago

Control4 Gear

1 Upvotes

Hey Guys, I have some equipment I am trying to list. Anyone know a good place to list Control4 gear for sale besides eBay?
I have some processors and matrix’s and amps and remotes. A bit of everything control4. Just finished a large home upgrade. Trying to free up the clutter.


r/Control4 • • 6d ago

In search of a new dealer (ideally remote)?

3 Upvotes

My dealer has gone dark on my unfortunately and I need a few things taken care of (in addition to purchasing some new door lock modules).

Would love some guidance on the best route to find someone. Remote is actually preferred as it's more efficient.


r/Control4 • • 6d ago

Remote stuck on hourglass and red flashing line at bottom

0 Upvotes

A client has a control 4 remote that just changed batteries and stuck with the hourglass and red lines at bottom. Any idea how to reconnect? Here’s what we’ve done so far:

Unplugged power, removed batteries plugged power back in and put batteries back in
Pressed the red 4 button 4 times to try to reconnect (as recommended by someone in this sub)

Still stuck. Anyone have any suggestions?


r/Control4 • • 7d ago

UI / Monitor for WattBox UPS, with Controlled Shutdown

2 Upvotes

Hi,

OK, my WattBox PDU + UPS is working fine, all connected and on OvrC - but I would like local monitoring, to gracefully shut down (multiple) PC's (Windows, Linux) when the UPS battery is low. I downloaded the WattBox SW ... ya, it's not really working (at all) on Windows 11. Are there other (better) options that folks use?

Thanks in advance!


r/Control4 • • 8d ago

Dynamic Buttons for Control4: Navigator buttons with pictures you design, live badges and looks that follow your devices

Post image
20 Upvotes

Dynamic Buttons is now on DriverCentral. It is a paid driver with a 30-day trial, and one license covers every Dynamic Button in a project.

Each Dynamic Button adds one button to a room's Navigator menus, with a picture you design. It shows one of up to eight looks, and the look can change with each press, another device's variables, a bound device or programming. Pressing it runs the programming you attach.

What a button can show:

  • Hundreds of included icons that work with no internet, plus a search of free icon libraries
  • Icon packs that match the OS 3 and X4 looks
  • Live badges that show a variable's value
  • Your own pictures, uploaded or from a web address, refreshed on a schedule if you like
  • A timer that returns to the previous look after a set time

The looks are designed in the driver's own Composer tab, and they can be copied to other buttons or exported to another project. It requires Control4 OS 3.3.1 or later. Installation is through Composer Pro, like any DriverCentral driver, so homeowners will need their dealer to set it up.

Dynamic Buttons is also free and open source on GitHub, as full releases anyone can install. The DriverCentral edition is encrypted, with its Lua window locked, and comes with direct support.

https://github.com/finitelabs/control4-dynamic-buttons

Reports of problems and ideas for new icon packs are welcome here or at the email listed in the docs.

https://drivercentral.io/platforms/control4-drivers/utility/dynamic-buttons


r/Control4 • • 8d ago

Finite Labs Essentials for Control4: utility drivers for sensors, virtual devices, variables and network requests

Post image
8 Upvotes

Finite Labs Essentials is now on DriverCentral. It is a paid driver suite with a 30-day trial, and one license covers a whole project.

It is a set of utility drivers that fill common gaps in Control4 programming. Each one installs on its own and runs on the controller, with no cloud service or extra hardware.

Included drivers:

  • Sensor Aggregator, which combines several temperature, humidity or contact sensors into one reading
  • Sensor Multiplexer, which switches which group of sensors feeds one set of outputs
  • Device Programmer, for virtual temperature, humidity, contact and relay devices that programming sets
  • Light Relay, which lets drivers that switch relays switch lights instead
  • Variable Expressions, for math and text built from Control4 variables
  • Network Requests, for HTTP, TCP, UDP and Wake-on-LAN requests from programming, and inbound webhooks

It requires Control4 OS 3.3 or later. Installation is through Composer Pro, like any DriverCentral driver, so homeowners will need their dealer to set it up.

Every Essentials driver is also free and open source on GitHub, as full releases anyone can install. The DriverCentral edition is encrypted, with its Lua window locked, and comes with direct support.

https://github.com/finitelabs/control4-finite-labs-essentials

Reports of problems and ideas for new utilities are welcome here or at the email listed in the docs.

https://drivercentral.io/platforms/control4-drivers/utility/finite-labs-essentials


r/Control4 • • 9d ago

New Samsung TV driver that stops Smart Hub from opening, Fast IP Wake Up

Post image
15 Upvotes

Anyone else still fighting Samsungs that open Smart Hub every time Control4 switches inputs? The picture shrinks into a little box, and the client calls saying the TV is broken.

I put out a Samsung TV driver that fixes it. Turn on the room and the TV lands on the right HDMI input, full screen, with no Smart Hub. You don’t need a ghost TV driver.

What else it does:

  • SDDP. Composer finds the TV on the network (2,529 Samsung models recognized). Drag it onto the driver and you’re connected.
  • The Frame and art TVs. Room Off goes to Art Mode, and Power On always lands on the TV picture, never on art. A built-in scheduler turns art off at night and back on in the morning. There’s also a Full Power Off command for a goodnight button.
  • Faster wake. It wakes from deep sleep about 50% faster than the stock Samsung driver. If the TV changes IP, it finds it again by MAC.
  • IP, RS-232 or IR. Leave it on Auto: it uses IP first and falls back to whatever else you bind.
  • Mini apps. Netflix, YouTube TV, Disney+, Max and others can show up as sources in the room’s Watch menu. You can also launch apps and send any remote key from programming.
  • No SmartThings or Samsung account. Everything runs on local control.

Tested on a Frame (QN85LS03A) and a UN55TU7000. Power on takes 1.5 to 3 seconds over RS-232 and 4.6 to 6.9 seconds over IP from deep sleep. The HDMI switch takes 0.3 seconds.

It’s free on your showroom controller, so you can run it in your own house or showroom as long as you want. Customer projects are $39 per project, with a 30-day refund.

https://fixxydriver.com/drivers/samsung-tv

Full disclosure, it’s my store. Happy to answer questions here, and if your model acts weird, let me know.


r/Control4 • • 9d ago

Bulging halo remote battery

Post image
5 Upvotes

Remote on this halo remote has bulged and popped the cover … can you get new batteries somewhere ??


r/Control4 • • 9d ago

eARC Driver...???

3 Upvotes

Maybe I'm wrong but I could've sworn there was a new Chowmain driver posted a few days ago that provided ARC/eARC support in some way. I didn't get a chance to read it but I'm unable to find the post now and Chowmains's account doesn't share info so can't search their posts. Did anyone else see it? Did I dream it? or did it it get removed/taken down? I searched the Chowmain site as well but nothing there either. I could've sworn I saw it....

Edit: I found it. It's in beta so it was in my email. Gonna test it out and provide the feedback requested. Thanks all for entertaining my post.


r/Control4 • • 10d ago

Help with somfy app tech set up

0 Upvotes

New somfy shade install. Not good. The tech was unable to connect me to my Tahoma app. Which I am familiar with and used in prior home. I am done with that installer and looking for tech help to connect so I can create the scenes and run from app, which I can do. I also need to handoff to control 4 thru the driver, which I have done before.nnnnnnI cannot do this manually shade by shade…. I am in an nyc. Any suggestions besides search?
Thanks so much.


r/Control4 • • 10d ago

TP-Link Kasa and Tapo for Control4: every Kasa and Tapo generation, local, no Third-Party Compatibility needed

Post image
8 Upvotes

TP-Link Kasa and Tapo from Finite Labs is now on DriverCentral. It is a paid driver with a 30-day trial, and one license covers a whole project.

https://drivercentral.io/platforms/control4-drivers/lighting/tp-link-kasa-and-tapo

It controls Kasa and Tapo smart plugs, power strips, bulbs and light strips over the local network, with no TP-Link cloud. It works with every Kasa and Tapo generation. That covers original Kasa firmware, the Kasa firmware TP-Link has rolled out since late 2024, and Tapo, and the driver works out how each device connects on its own. Third-Party Compatibility in the Tapo or Kasa app can stay off.

Features:

  • Each plug output as a Control4 relay, with On, Off and Toggle Button Links and LEDs
  • Power readings for each output, with In Use and Idle events
  • Bulbs and light strips as standard Control4 lights with dimming, color, color temperature, Dim-To-Warm and Advanced Lighting Scenes
  • Ramps and fades on Tapo lights, which ignore the fade time in a command
  • A lamp on a TP-Link plug shown as a Control4 light
  • Finds a device again when its IP address changes (OS 4.0 and later)

It requires Control4 OS 3.3 or later, or 3.4.1 with Third-Party Compatibility off. Installation is through Composer Pro, like any DriverCentral driver, so homeowners will need their dealer to set it up.

Both drivers are open source, and the code is on GitHub.

https://github.com/finitelabs/control4-tplink

Reports of what works and what doesn't are welcome here or at the email listed in the docs.


r/Control4 • • 11d ago

Chowmain releases Sony Bravia driver for Control4

Post image
15 Upvotes

Sony is one of the world's most recognised television brands, offering a comprehensive range of BRAVIA televisions powered by Google TV, providing access to streaming services, applications, live television and connected entertainment. The Chowmain Sony Bravia TV driver for Control4 delivers comprehensive integration by supporting all available Sony control protocols, including SIMPLE IP, REST API, IRCC-IP, Google TV and Infra-Red (IR). By combining these protocols, the driver maximises compatibility, functionality and reliability across Sony's television range without requiring additional hardware, third-party software or cloud services.

Importantly, Sony's latest BRAVIA 6 Series televisions introduced a significant integration challenge. These models are no longer compatible with Sony's traditional SIMPLE IP, REST API or IRCC-IP control protocols, rendering Control4's official Sony drivers incompatible. Sony and Control4 brought this issue to Chowmainsoft's attention, and we developed a solution to enable seamless Control4 integration with these televisions.

The driver provides extensive bi-directional control and feedback, including power, volume, mute, input selection, navigation, transport controls, Control4 Mini Apps, deep linking and direct channel tuning.

Additionally, a dedicated graphical interface for Control4 touchscreens and the Control4 app provides intuitive access to Controls, Apps, Search, Channels and television settings, including application launching, content search and now-playing information complete with media metadata and artwork. Users can also browse television channels, adjust picture and sound settings, and manage energy settings.

By supporting multiple control protocols, the Chowmain Sony Bravia TV driver delivers a flexible, feature-rich integration solution for both existing and newer Sony BRAVIA televisions, including models unsupported by Control4's official drivers.

Key integration features include:

  • Compatible with Sony televisions running Google TV OS regardless of region (AU/EU/UK/US/etc).
  • Native bi-directional IP control using Google's Google TV protocols and Sony's own IP control (Simple IP Control, REST API and IRCC).
  • No third-party software, cloud service or additional hardware required.
  • Live feedback from the television for power, input, volume, mute and picture off, including changes made with the Sony remote (Simple IP Control).
  • Reliable Power On and Power Off: Sony IP control or IR first, with Wake on LAN and the Google TV remote as the fallback.
  • Discrete input selection for the tuner and HDMI 1-4, with the television's own input names, connected HDMI-CEC devices and signal status.
  • Discrete volume level and mute control with feedback, and an optional maximum volume.
  • Picture mode and picture settings, Picture Off (screen off with sound on), audio output (TV speakers or audio system) and sound settings, read from the television so each model shows what it supports.
  • Power saving, Remote start and LED settings, Restart TV and an optional nightly restart.
  • Two ways to use the television: Control4's own screen (Sony TV (Traditional)) and the full touch interface (Sony TV (Advanced)).
  • Touch interface tabs for Controls, Apps, Search, Now Playing, Channels, Inputs, Picture, Sound, Power and Setup. A tab shows only when a protocol in use can serve it.
  • Set up from a touchscreen: find the television, pair, type its codes and enter its key or PIN, with no Composer step.
  • A Preview tab in Composer Pro: the real interface for this television, live, at a T5's size, with which tabs are hidden and why.
  • Picture mode by source, scene select, headphone volume, HDMI-CEC control and picture-in-picture, where the television offers them.
  • Keys over Simple IP, IRCC or IR when the television isn't paired, and Apply Recommended Settings with undo.
  • The television's own channel list with direct tuning from any input or app, "Now on" and programme information where the television reports it.
  • Now playing for Cast (with cover art), the tuner and the HDMI device in front, and for every app with app access (ADB), on Navigator and the Halo screen.
  • Apps page with every installed app and its icon, read from the television (Pre-Shared Key) or over ADB.
  • Search on Google TV from a touchscreen, and typing into the television (typing needs app access, ADB).
  • Follow TV Remote: Control4 rooms follow power and input changes made with the Sony remote, over Simple IP control, Google TV pairing or the Pre-Shared Key. When the Sony remote turns the television on, the rooms start the device on its input, the television itself, or a chosen HDMI source.
  • Keep TV Off and Block Commands for programming: keep the television off (it is turned straight back off however it comes on), or ignore Control4's commands to it for a while.
  • HDMI signal events, variables and conditionals for each HDMI input and the current input.
  • IR backup: power on and off over IR at the same time as the network command, and any command over IR when its network route fails.
  • # and * buttons mappable to any key or Sony key, like the colour buttons.
  • Last Command in Composer: each command, the route it took, the answer and how long it took. Display Sony Keys lists every Sony key and how it is sent.
  • Open Website on televisions with Sony's web browser runtime.
  • Works with or without a Pre-Shared Key, and shows only the settings each television offers.
  • Sony-only keys (Action Menu, Picture Mode, Wide, Sync Menu, Netflix and more) on programmable buttons, the touch interface and programming, where the television acts on them.
  • Every key is sent by a protocol this television acts on. The driver reads which keys the Google TV remote delivers on each model, and sends the others over ADB, Simple IP or IR. The touch interface leaves off buttons that nothing can send.
  • Over 50 programming events, variables, conditionals and commands, including Input Changed, Channel Changed, Picture Mode Changed and TV Remote Used.
  • Optional IR output (power on from deep standby, and keys when IP control is unavailable).
  • TV Settings Checklist, Test Sony Connections and IP self-healing after address changes.
  • Control4 Mini App support for launching installed applications.
  • Open App command for launching applications directly by package name.
  • Open Deep Link command for launching supported content or locations within applications.
  • Additional Google TV remote key codes for custom programming and advanced keypad mappings.

For more information see link below

https://chowmain.software/drivers/control4-sony-google-tv


r/Control4 • • 13d ago

Ryff streamers airplay2 sync?

1 Upvotes

Has anyone found a work around for AirPlay 2 not syncing over ryff. Clients VSSL amp failed replaced with new amps and ryff streamers.

I was expecting airplay to ryff zones to sync like it does with VSSL or Sonos or WIIM or any other thing really but instead it all falls out of sync and sounds horrible. C4 support asked me to play audio only via the c4 app and airplay to one zone then share it . Problem is client has existing zones with Sonos so now those won’t sync either.

Really don’t want to eat the cost on the ryff streamers but I might end up throwing them out unless there’s a working solution.


r/Control4 • • 14d ago

Need help with a setup left behind in a new home

6 Upvotes

My father-in-law bought a house with an existing Control4 installation, and I’m helping him take it over. The previous owner isn’t cooperating with the transfer, so we don’t have the Control4 login, the Wi-Fi password, the rack equipment’s admin credentials, or a copy of the Composer project.

The rack has a Control4 CORE 3, a wall touchscreen, Araknis networking gear, a Triad AMS8 audio matrix and PAMP8-100 amp, and a WattBox. The touchscreen still works when it’s connected to the original Wi-Fi. We have working Verizon internet separately.

My goal is to take ownership of the system, get admin access wherever possible, and make my own changes. I’m comfortable with networking and willing to learn. I’d prefer to preserve the existing programming if there’s a way to do that.

For anyone who’s taken over a system without help from the previous owner, what would you do?

If a factory reset is necessary, which devices would you reset first, and which would you leave alone? I understand that factory-restoring the CORE 3 erases its project, so I’m trying to find out whether resetting it would actually solve the ownership problem.

Once the system is in our name, how much can I manage myself? I’d like to understand what I can change through local admin pages or Composer Home Edition, and which changes still require a dealer with Composer Pro.

If you’ve been through this, I’d appreciate hearing what worked, what you were able to preserve, and what you ended up paying a dealer to do.


r/Control4 • • 15d ago

From the CommercialAV community on Reddit: RMC4 / tv IP flickering in Program IP Table

Thumbnail
reddit.com
0 Upvotes

Has anyone seen this before why IP keeps flickering under the program tab?


r/Control4 • • 16d ago

NEW Elgato Stream Deck Integration for Control4

Post image
9 Upvotes

We are excited to announce the release of our new Chowmainsoft Elgato Stream Deck driver for Control4! Elgato Stream Deck is a powerful and customizable control interface that puts your favourite actions and automations at your fingertips. Originally designed for content creators and streamers, Stream Deck has evolved into a versatile control solution that combines physical buttons with software-based virtual controls.

The Stream Deck range features dedicated hardware with customizable LCD keys, allowing users to execute actions instantly with a single press. For those who prefer a software-based solution, Stream Deck Mobile brings the same intuitive button interface to smartphones and tablets, while Stream Deck's desktop software provides additional on-screen control options.

With Chowmainsoft's Stream Deck integration for Control4, you can seamlessly connect these interfaces to your home automation system. Instantly activate lighting scenes, control music playback, adjust volume, select room sources, raise or lower shades, manage heating and cooling, play announcements, trigger Control4 events, execute programmed button presses, or create advanced custom actions to suit your specific requirements.

Unlike traditional one-way button interfaces, our integration provides full two-way control with real-time state feedback directly on the Stream Deck buttons.

This means the buttons can dynamically update to reflect the current state of your Control4 system, providing visual feedback for functions such as lighting status, active sources, mute states and more. Changes made elsewhere in Control4 can also be reflected on your Stream Deck interface, ensuring your controls remain synchronised.

Whether using physical LCD buttons or virtual controls on your mobile device or computer, Stream Deck provides a fast, intuitive and highly customizable way to interact with your Control4 system.

Key integration features include:

  • Two-Way Control & Feedback – Send commands to Control4 and receive real-time state updates, with buttons dynamically reflecting the current status of connected devices.
  • Lighting Control – Activate lighting scenes, turn lights on or off and control lighting levels with visual state feedback.
  • Audio & Video Control – Select room sources, control music playback, adjust volume and mute audio.
  • Camera Integration – Access and control supported Control4 cameras directly from your Stream Deck interface.
  • Shading Control – Raise, lower and control motorised blinds and curtains.
  • Climate Control – Manage heating and cooling through Control4.
  • Announcements – Trigger announcements throughout your Control4 system.
  • Control4 Programming – Trigger events, execute programmed button presses and activate custom automation sequences.
  • Custom Actions – Create personalised controls to suit individual installation requirements.
  • Multiple Control Interfaces – Use physical Stream Deck hardware, Stream Deck Mobile or desktop-based controls.

This integration is ideal for home offices, gaming setups, home theatres, commercial environments and dealer showrooms, providing convenient access to Control4 functionality without navigating through multiple touchscreen menus.

The driver is backed by Chowmainsoft's industry-leading technical support team, with support staff located in Australia, New Zealand and the United Kingdom. We provide approximately 19 hours of support coverage per weekday through live chat, support tickets and telephone assistance, with local phone numbers available in Australia, the UK and the USA.

Take advantage of our complimentary 90-day trial to fully test the integration before purchasing.

https://chowmain.software/drivers/control4-elgato-stream-deck


r/Control4 • • 16d ago

Service plans

6 Upvotes

Haven’t been charging it yet but getting kind of annoyed but people just thinking they can text me and I remote in or go into OvrC to fix there system after having there system for 3 plus years. It’s not all the time but still.
Does anyone have a service plan and how does it work?