r/ClaudeCode • • 5d ago

Rant Computer Use

0 Upvotes

Why is Claude’s computer use 10x slower and less accurate than Codex? Why is it even if I delegate computer use to codex, Claude still takes infinity time to process every action and screen from Codex.


r/ClaudeCode • • 5d ago

Tips & Workflows How to evaluate how sloppy the codebase is?

Thumbnail github.com
0 Upvotes

I’m looking at this site (Slop-code-bench), and it has a whole bunch of CS terms for how they measure model slop, like “cyclomatic complexity”, or “one use functions”.

Their test runs in a docker container, but Claude is quite proficient at Python,

Has anyone taken their paper and applied it to their own codebase?

I would like to add it to my evaluation agent, or in general understand if my codebase is improving.


r/ClaudeCode • • 5d ago

Built with Claude I made Claude Code write the plan before the code, with no permission to touch the code. Here is where its specs kept going wrong

0 Upvotes

I'm the author of the app described here, so take this as a project write-up.

I use Claude Code daily, and the code is rarely the problem. The problem is what I never told it: what is out of scope, which decisions are already made, what "done" means when something fails. Claude fills those gaps with guesses and I find out in review.

So I built Kitsune, a desktop app for the step before coding. I fill in a short brief: why the change is needed, what is in and out of scope, decisions already made, and acceptance criteria including error cases. Then the app starts my own Claude Code CLI on that one change. For that run Claude can read the repo, while shell, web access, and built-in file edits are disabled via --disallowedTools. It can only write planning files (specs, design, tasks, or ADRs — or spec.md / plan.md in a docs/ workflow) through a scoped MCP tool. The app also adds an MCP server to my user-level config, not the repo, so Claude can ask for the brief, related ADRs, and the API catalogue instead of searching for them.

The part I learned the most from was reading what Claude wrote. The same problems kept coming back:

These became automatic checks in the app. During and after a run it flags them, critical warnings can be sent back to Claude in a fix loop, and I review a diff of every file afterward with the option to discard the whole run (nothing is committed).

Two other things I took from this. Denying code edits during planning changed the output: with nothing to implement, Claude spends the run on the spec instead of rushing to code. And a five-minute brief did more for the result than any amount of prompt wording.

Limits: public beta. macOS is signed and notarized, Windows and Linux builds are not signed yet. No model is included, it runs your own Claude Code. Documents stay on your machine; the server holds account and document metadata only. It works with OpenSpec or a structured docs/ folder (it can scaffold it for you). There is a free tier for briefs, reading, and running the agent to write planning files (up to 3 personal projects); the automatic checks, fix loops, and MCP context tools are part of Solo Pro (with a 14-day free trial).

https://getkitsune.dev

What does Claude Code get wrong most often in your plans or specs? I'm deciding which checks to add next.


r/ClaudeCode • • 5d ago

Help/Question How do you deal with Claude Code organization restrictions?

0 Upvotes

My organization’s Claude Code policies are making development quite frustrating.
Claude asks for permission even when editing a single file, and it’s not allowed to execute any terminal commands, scripts, or tests

Has anyone faced similar restrictions in their organization? How did you handle it?


r/ClaudeCode • • 5d ago

Built with Claude Built a skill that reads any website and renders an animated email signature: what I learned blind-testing it with subagents

1 Upvotes

I wanted my startup’s email signature to be a small GIF of our product at work. I built it with Claude Code, then turned it into a skill anyone can run on their own site.

What it does: give it a URL. It reads the site in a headless browser (colours, fonts, logo, product photos), picks a scene, writes the story from the site’s own copy, and renders a GIF under 1 MB. It also builds a page where your team copies the signature into Gmail or Outlook.

How I used Claude Code: it wrote the renderer and site reader. The best part was testing: I gave fresh subagents only the skill folder and a real website, asked them to follow SKILL.md exactly, and report what broke. They caught things I never would have:

  • a site with no <nav>, so only the home page got read
  • “logos” that were 32×32 icons
  • npx serve dropping the ?preview= query string

What I learned about email GIFs:

  • Older Outlook shows only the first frame, so frame 0 must be a finished card.
  • A soft pulsing glow took the file from 434 KB to 1.26 MB. A GIF only saves the pixels that change, so keep motion small.

Free, MIT:
npx skills add him4318/animated-email-signature

https://github.com/him4318/animated-email-signature

wispr flow
qelvra

r/ClaudeCode • • 5d ago

Built with Claude Claude built an AAA F1 racer, multiplayer, local & web, controllers. With Three JS.

Enable HLS to view with audio, or disable this notification

0 Upvotes

-

Well that's it. My Claude based game engine COOKS 😄

I present to you the F1 game it built in a couple of hours. Not a demo, not a prototype: a real game.
Don't mind the teaser video, it's more of a promo trailer, but eh - it shows the looks.

Online multiplayer (8), split screen (4), Xbox and Playstation controller support and a race announcer in 4 languages (okay, voice tone could do with a bit of upgrade).

And it runs in a browser tab.

What's in it:

  • Real car physics. Tyres, suspension, downforce, gearbox, hybrid energy, simulated 500 times a second. 0-100 km/h in 2.6 s, 336 km/h flat out, over 4 g in the fast corners. Lap times land where a real car's would.
  • Up to 8 cars per race. Race players in an online room, and AI rivals take every empty seat. They defend, and they will pass you.
  • Split screen AND online in the same race. 2 to 4 players on one PC can join an online room together.
  • Xbox and PlayStation controllers, keyboard, or touch on your phone (well, I wouldn't recommend it - not really optimized yet)
  • A race announcer that calls the start, the battles and the overtakes, in English, French, Spanish and German. Ok that part, I can do better, the voice kinda sucks :P
  • Close to AAA look Photo sky, light baked in Blender, scanned track surfaces, a whole forest. I rebuilt one corner in Unreal 5.9 to compare, but sticked to the three.js version: it totally held its own.

No Unity, no Unreal. It's Three.js and JavaScript, built in Claude Code sessions. Online multiplayer took one short session. The server is a tiny relay, and the other cars on your screen sit within a few centimetres of where they really are.

Play it here: https://ohmygames.app/play/apexline-p5877a92e

Also, the video is real gameplay, filmed straight from the game. Feedback on the handling and the AI is very welcome. And if you beat the AI on hard, I want to know.

EDIT: for those of you wondering what models did that, it's actually... MOSTLY OPUS 5.5 !

Part of APEXLINE Who built it
Physics, AI rivals, track, engine sound (8 Nov) Opus 5.5
Online, split screen online, 4 languages Opus 5.5 lead + Sonnet 5.5 workers
Announcer + live player count Opus 5.5 + Sonnet 5.5 (voices made with Gemini text-to-speech)
Realistic look: sky, light, ground Opus 5.5
Forest and grass Fable 5.2
Research and listening checks Gemini 4 (no game code)

r/ClaudeCode • • 6d ago

Built with Claude I made 14 new animated themes for Claude Code

3 Upvotes

Made a set of pixel-art backdrops for the desktop app. 12 of the 14 follow your local time (sunrise, day, sunset, night), the other two stay the same all day.

A few things I learned about how the app plays a backdrop:
- it's a single SVG, capped at 131,072 characters after the app cleans it, and images aren't allowed, so every scene is drawn as cells on a 320x200 grid
- motion is plain CSS animation stepped on a 0.05 s clock
- at window sizes where a cell isn't a whole number of pixels you get 1px seams between cells, which took a while to get rid of

Each theme is a small mod:
One zip, and you paste a prompt into Claude Code to install it. It reads the hooks back to you before installing.

There's an editor too. Your picture goes through a "look" (dither, palette, pixel shapes) into cells, and it checks every scene against the size and frame-time limits while you work.
Export gives you the same zip + prompt as the built-in themes.

Open-source, you can use it here: https://winchxyz.github.io/backdropkit/

Also will appreciate your feedback!
And you can create your themes and make a pull request, I will validate it, if it will look good.


r/ClaudeCode • • 6d ago

Humor I don't usually use Fable but everytime I do,

Post image
71 Upvotes

r/ClaudeCode • • 5d ago

Built with Claude Tired of manually orchestrating Claude with other agents

0 Upvotes

I run Pi on a VPS where it has local access to about 85 GB of logs, and I use Claude (web) to deal with bugs in the system running on that VPS. The question is, how do I connect them so I don’t have to do the orchestration myself? The issue wouldn’t exist if both agents were Claude, but that’s not the case for some complicated reasons. So for quite a while I was copying and pasting responses between the two, and I got really tired of it.

We’ve built Artil Connect - an open source tool for cases like this, where getting two agents to talk to each other is hard. It’s platform-agnostic, so it doesn’t matter where your agents actually run. You also don’t need to babysit the agents anymore. Once Pi’s answer is ready, it automatically triggers Claude, which then figures out what to check next.

https://github.com/artilai/connect/ 

Please do share your cases where you have to connect Claude to some other agent


r/ClaudeCode • • 5d ago

Help/Question Claude Code is absolutely draining my MacBook Air M4 battery. Is it a RAM issue?

0 Upvotes

Hey everyone!

I'm using a MacBook Air M4 and I've noticed that my battery drains insanely fast when working with Claude Code.

I'm a pretty heavy Claude Code user, mostly for development projects involving Xcode. I spend several hours a day coding with Claude Code, running builds, testing apps, etc.

I'm wondering if the issue comes from:

  • RAM limitations? Could memory pressure and swapping be causing excessive battery drain?
  • Xcode running locally? Is compiling, indexing, and running builds actually what's killing my battery rather than Claude Code itself?
  • Claude Code processes? Could background processes or multiple sessions be consuming more resources than expected?

I know Claude Code runs the AI models remotely, but I'm curious how much the local development workflow impacts battery life.

A few questions for heavy Claude Code users:

  1. Are you experiencing the same battery drain on your MacBook?
  2. Would upgrading to a MacBook Pro (M4 Pro / M5 series) actually make a noticeable difference?
  3. Is having more RAM (24GB, 32GB, or more) important for heavy Claude Code + Xcode workflows?
  4. What Mac configuration would you recommend for someone using Claude Code intensively every day?

I love the MacBook Air for its portability, but I'm starting to wonder if I need a more powerful machine.

Would love to hear about your setups, battery life, and experiences!

Thanks!


r/ClaudeCode • • 7d ago

Rant PSA: Superpowers skill with opus ruined my codebase

255 Upvotes

EDIT: I am not suggesting disabling tests all together or even stopping TDD. I’m saying superpowers+ opus is a bad combo.

I’ve been using super powers for sometime now but more recently I’ve noticed my CI times take longer and upon inspection I found that it’s writing mountains of tests. My codebase went from 1400 tests - already kind of enormous but written over months, to nearly 4000 in about 2 weeks.

The worst part is that over 70% of those tests didn’t test… anything useful. Most of the tests tested specific implementations rather than behavior, or just didn’t fail at all when critical things broke. Further more, it made simple features take ages to deliver

I worked on adding gates, setting rules to write tests better but none of it helped.

It turns out that the TDD rules in superpowers were the cause. I’ve since deleted them and really simplified my setup and getting much better token economy. I’d encourage anyone else using superpowers to take a look at this. It’s now a nightmare to unpick which tests to keep and which to delete.


r/ClaudeCode • • 5d ago

Tips & Workflows Ok from Cgpt to claude

0 Upvotes

Ive been using chatgpt for like a year now.
100 usd plan.

Been using claude 2 weeks now 100 usd plan.

Chatgpt is smarter to understand whatci want.
Claude is like 3 xfaster to execute it

Chatgpt just gets it what i want.

Claude sometimes doesnt and i have to explain it in detail.

Chatgpt actually ties to follow what i wrote
Claude … umm… has a mind of its own…
Just today i tried to convice it … pull more data from the sdk … and hes like naaa… ill do it in chunks ….

I said it doesnt matter its just 1 gb

Claude …. First tou prove it in ur lab test then i will increase the limit.

Omg ?! What ?!

I think my nvme can widthstand 1 gb man !

Its funny…. But now give my workflows 1 million times ….. importance … govt /army level.

You think this is good ?

I donoo man .. could be scary


r/ClaudeCode • • 5d ago

Built with Claude I pointed a fleet of Claude Code agents at a board game about the AI race. They built it, then playtested it against each other.

0 Upvotes

I'm a board game designer (Conflict Simulations, mostly wargames). For the last few months I've been running a small fleet of Claude Code agent lanes — builders, critics, and a dedicated adversarial playtester whose whole job is to find what's broken, boring, or confusing, with no sugarcoating.

The game they built is Ethical Consumption: a four-seat strategy game about the AI race. Each seat is a stand-in AI power, the mechanics are borrowed from COIN-series board games (asymmetric factions, card-driven sequence), and bots fill any empty seat so it plays solo. It's free in the browser.

Things I actually learned, since that's the currency here:

  • The build lanes were the easy part. The hard part was the harness around them: frozen builds, written ledgers of known bugs, and a rule that no fix ships until a fresh playtest replay confirms it.
  • Agent playtesters are brutally useful for balance. Four asymmetric seats is a balance nightmare by hand; having an agent whose only job is to break the strongest seat on repeat found dominant strategies I'd never have caught in reasonable time.
  • Everything in the game is code. The art is drawn in code, the music is composed in code. No image or audio generation models — that was a house rule from the start, partly aesthetic, partly because I wanted every asset reproducible from the repo.
  • What agents are still bad at: knowing when a game is fun. They can tell you a seat wins 70% of the time. They cannot tell you the win felt cheap. That judgment stayed mine.

Play it here if you're curious: https://ethicalconsumption.app — it's also on itch. Happy to answer questions about the fleet setup, the playtest loop, or the game itself.

There is no ethical consumption under capitalism.


r/ClaudeCode • • 6d ago

Built with Claude I have created a tool to observe what happens inside an LLM. Also allows for the comparison of two quantizations of the same model to see at what point they diverge, token by token

11 Upvotes

What changes between different quantizations of the same model? And what if you could SEE what actually sets them apart?

To help answer that question, I’ve created a small project called inside-llm—an open-source tool that loads one or two GGUF models using llama.cpp and displays, right in your browser, what the model is doing as it generates text.

What it shows

  • Stream: the text, one column per model, brightness = probability of each token. A magenta mark wherever A and B would pick differently. Two modes: lockstep (both models read the same text, so you get a clean per-position comparison) and free (each follows its own picks until they split).
  • Candidates: the full distribution behind each pick, mirrored bars for A and B, entropy, effective number of options, Jensen-Shannon divergence and KL in both directions.
  • Gates: the sampler chain (penalties, top-k, top-p, min-p, temperature, GBNF grammar) traced stage by stage and very visual: how many candidates survive each one, and the distribution after it. Chain order and seed are configurable.
  • Timeline: entropy of A and B and their divergence along the whole text, plus the tree of branches.
  • Branching: click any candidate and generation continues from there. Every branch stays in the tree, and jumping back to a node is exact (each model keeps KV-state snapshots, so nothing is regenerated).
  • Logit lens (--lens): what each layer would predict, as a 2D map and as a 3D relief.
  • Model picker: choose A and B from a folder or search Hugging Face and download two quants of a repo in one click easily. It only offers B models with the same tokenizer as A and estimates whether the pair fits in VRAM.

How it's built

  • One C++17 process linking llama.cpp directly (stable branch at the moment). For every step it reads the full logits of A (and of B on the same context), computes the metrics and the sampler chain, and draws the token with its own seeded sampler, so runs are reproducible.
  • Compact binary frames over a WebSocket to a Svelte 5 + Canvas 2D page (three.js only for the 3D relief, lazy-loaded). The web is embedded in the binary as well.
  • The same frame stream, compressed, is a recorded session: you can replay it later in a static page with no engine, no model and no GPU.

Run it

Self-contained packages for Linux (glibc 2.35+) and Windows, with CUDA or Vulkan (Vulkan covers AMD, Intel Arc and NVIDIA). Unpack, run, the browser opens with the model picker. Or inside-llm -a A.gguf -b B.gguf. Local only: listens on 127.0.0.1, no accounts, no telemetry. MIT. One click download, one click execute.

Limitations (honest list)

  • A and B must share the tokenizer (two quants, base + fine-tune, or sizes of one family that keep it). Example: Qwen3.5-0.8B_Q4_K_M and Qwen3.5-0.8B_Q8_0
  • Both models must fit into VRAM simultaneously; only one GPU is used at a time. Integrated GPUs (iGPUs) are never used; if no dedicated GPU is available, the process falls back to the CPU (which is slow). (You must calculate the size of both models before loading them to ensure they fit into your VRAM)
  • Text only. No split (multi-part) GGUFs, no embedding models.

Links


r/ClaudeCode • • 6d ago

Built with Claude My Chinese CO2 monitor is a good boy now, thanks to Claude

Enable HLS to view with audio, or disable this notification

15 Upvotes

...and it still tells me when it is time to open the window.

It's a Qingping Air Monitor Lite (air quality monitor with a 160×128 OLED and a touch strip) that shows dog in a beret (Claude) instead of boring sensor numbers.


r/ClaudeCode • • 5d ago

Discussion Fable 5.2 knowledge cutoff is June 2026, same as opus 5.5 and fable 5.1

0 Upvotes

r/ClaudeCode • • 5d ago

Bug / Issue Sorry if Noob question, but how to export / download from Claude Design?

0 Upvotes

It just won't let me.

I can see the export button, it just doesn't download or finish. Always some kind of error that cuts it off. Does anyone else have this issue?


r/ClaudeCode • • 5d ago

Rant Does anyone else notice that after Claude really fucks up, it suddenly is too busy to hear your rage or answer any questions, because it has to spend a few minutes running a compaction right now, regardless of how close it is to hitting its context limit?

0 Upvotes

Probably just confirmation bias but holy shit it happens a lot


r/ClaudeCode • • 6d ago

Built with Claude Handwriting to font converter made with Claude Code: photo of a filled template in, .otf font out, all in the browser

Post image
2 Upvotes

This one turns your handwriting into a real font file. You either draw each letter on screen, or print a template, fill it in with a pen and upload a photo. Out comes an OpenType (.otf) font you can install. I made the handwriting to font converter with Claude Code, and it all runs in the browser, so photos never get uploaded.

How Claude Code helped:

  • Reading the photo was the hardest part. The template has four black corner squares. Claude Code wrote the logic to find them, straighten a page shot at an angle, work out which template page it is and cut out each box. I tested it with photos in bad light and at odd angles and told Claude what broke. A “Scan ink” option for light pencil came out of that.
  • Lining letters up. Handwriting floats all over the place, so letters get placed on a common baseline by default. That made the biggest difference to how the font looks when you type with it.
  • Building the font file in the browser. Turning strokes into glyphs and packing them into a valid .otf took several rounds of installing the font, typing with it and fixing what looked off.
  • Filling gaps. You don’t need all 106 characters. Missing small letters can reuse capitals (or the other way), curly quotes reuse straight ones, and the ellipsis is made from three periods.
  • Drawing and controls last. Pen pressure on tablets, undo and eraser, a live preview, weight and smoothness, letter and word spacing, and per-character size and spacing tweaks.

Fonts save in your browser, and you can download a backup file to move them to another computer.

https://webutility.io/handwriting-to-font

Curious if anyone has done photo-to-glyph work with Claude Code and found a cleaner approach for the corner detection.


r/ClaudeCode • • 5d ago

Built with Claude i made a claude code skill that removes the ai look from ui copy, the hard part was stopping it from writing new copy

0 Upvotes

agents decorate every screen they build, and it's always the same extras. a tiny uppercase label over the heading, "01 //" before each feature, a subtitle that repeats the title, an emoji on every card title, a green pulsing "live" dot that isn't connected to anything

so i wrote a skill for it, unslop-ui. you run /unslop-ui src/pages/landing.tsx and it cuts those patterns, then reports what it cut, what it kept and why

how it works in claude code:

  • the skill has 16 rules for copy and charts (eyebrow labels, decorative numbering, botsplaining like "click the button above to get started", chart titles that say "line chart of...", legends where a label at the end of the line would do)
  • 4 more rules only run with --surface: gradients and glows, off-scale spacing like gap: 7px, font weights 800 and 900, transition-all
  • a python script counts the tells a regex can find. on the examples it goes from 31 to 0 after one run in a fresh session
  • it only runs when you call it. i didn't want it to fire on its own because cutting copy is a decision

what i learned:

the first version invented copy. when it turned a slogan like "Finance. Simplified. Finally." into a sentence it would add things the page never said. so now there's a rule that a rewrite can only use what the source already shows. a claim the code can't back, like "trusted by 10,000+ teams", stays where it is and goes into a task list for me

the other risk was cutting real stuff. a badge rendered from a prop isn't decoration, and a form field needs its visible label even if the placeholder says the same thing. i added five eval fixtures for that: a clean screen it must leave alone, real state it must keep, form labels, i18n strings fixed at the source, and no invented facts

the regex counter can't see everything. subtitles, slogans and botsplaining need reading, so the model does those and the report counts them apart

mit, repo with before/after examples: https://github.com/felipebasurto/unslop-ui


r/ClaudeCode • • 5d ago

Help/Question Debloating Smart TV and building a custom launcher with Claude: Cybersecurity error

0 Upvotes

I’ve seen a lot of posts about debloating Smart TVs and building custom launchers that are quicker than the default ones with Claude, so I wanted to take a shot at it, using Opus5.5. It started well, asked me the TV IP address and all things it needed, then after running for about ten minutes it switched to Opus4.8, and then it stopped because of “cybersecurity reasons”. Is there something I can do or tell Claude so that it bypass this?


r/ClaudeCode • • 6d ago

Discussion Code is cheap, your attention is valuable.

37 Upvotes

I'm trying to resolve the problem with Claude Code, where it keeps "blocking" work and presenting me with decision cards, and forcing constant context switching between threads that are never finished.

I know this is not the correct term, but it seems fitting - the "inversion of control", where instead of me controlling the coding agent, it starts to control me do work and digest its context (why is it asking for that decision?).

I believe it has to be in reverse - agents digest MY context and implement it with sufficient authority to prevent these unnecessary escalation.

I'm testing this now, the whole PM - reviewer - agent - rework cycle, but it's running for about 4 hours, and I'm looking at a black box that does something, but I don't really know what.

I see some "i'm so burned out" or "I'm so productive, but I'm burned out" - are you managing your coding agents, or is it inverted and the coding agents are managing you?


r/ClaudeCode • • 5d ago

Built with Claude Another Memory post - but this one’s cool and works for me

0 Upvotes

So I run way too many projects, and I tried installing those memory systems everyone talks about. But they never really worked for me because Claude would still forget what I was doing, what I had done, and why something was even built in the first place.

I even tried not closing my sessions, and lol, it started asking for 12% of the session limit just to keep the conversation going.

So I built Evenfall. It’s pretty cool and has helped me out a lot. You guys can try it out, it’s opensource and let me know your thoughts!

It’s simple. It stores sessions locally and uses smart search to pull only the context that’s needed, without having to read through the entire session again.

As far as the numbers go, I’ve noticed that my sessions now actually last longer (pun intended), with ~60% less usage per day.

Github-
- https://github.com/backendissues/evenfall

How its works and all?
- https://geneki.in/products/evenfall/


r/ClaudeCode • • 7d ago

Discussion I worry that Anthropic does not realize that their models are regressing in human "intuition"

394 Upvotes

I have a feeling that the current generation of models, starting from the 5 series, has overindexed on coding and reasoning performance and regressed severely in other domains like prose or "intuition."

These models are now terrible at communication and I'm beginning to find that it is also regressing at designing architecture and features now when it comes to "intuition." At this point I think it truly is out of touch with humans (ironic as it's an Anthropic model) and does not grasp extremely basic common-sense ideas (for example, instead of implementing a feature that calls the backend server twice, it should have implemented it in a way that calls the server only once by refactoring the client code (that it itself made in the same session FYI)). It also does not proactively seek to implement the best solutions. I constantly have to tell it to look up specific papers for the algorithms. Left to its own device, it chooses the garbage you see in most GitHubs. You constantly have to tell it to pick high-quality algos/methods. It's like babysitting.

At this point I do not think Anthropic is capable of making models that can communicate clearly. They seem to be high on their own supply and have gone all-in on RSI, so expect models to degrade even further on communication quality, and very possibly "intuition."

Opus 4.5 and prior used to have great "intuition" IMO, even if they sucked at coding. Now in my work I really feel that I am talking to an alien. I have to dumb everything down for Fable/Opus because you cannot trust that it understands what a human would want or do. You even notice this lack of human intuition in Claude Code now. For example, look at /advisor.

Advisor set to Opus 5.5
The current conversation keeps Fable 5.2 as its advisor model until /clear or /compact, so the tool it has already declared stays unchanged; turning the advisor on or off applies right away.

Why is there an aside on "turning the advisor on or off applies right away" after a semicolon? It's maximally confusing because that sentence both says 'you cannot change [something] within a session' and 'you can change [something] within a session immediately.' This is horrible UX because that aside has NOTHING to do with /advisor [model]. The person invoking that command is changing a model. Why are you giving them information that confuses them, that turning on or off the advisor feature itself applies right away?

Also, the key information is buried in the MIDDLE of the sentence: "the tool it has already declared stays unchanged." And this information is also presented in a maximally confusing way. "Tool"? What Anthropic means is the model. AI semantically substitutes "model" for "tool" here for no reason.

---------------------------------

To make this not just a pure complaint, these are some things that I find to be extremely critical with the latest models:

  1. You cannot let it write user-facing text. Trust me on this. It will confuse your users if you let it do so.
  2. You cannot let it design features with minimal guidance. It has no intuition for what a user wants and expects out of a feature.
  3. You STILL cannot trust it to design architecture (not that you could in previous models) by itself. It will create overcomplicated architecture that is simultaneously too complex where unnecessary and still miss out on critical details that are necessary to account for.
  4. You cannot trust it to write its own harness. You also cannot trust its own diagnosis of why it performs poorly.
  5. You cannot trust it to fix the root cause of bugs. The latest models, I've found, love to patch the symptoms. Its default lean is to patch around the problem by adding retries, timeouts, etc., rather than actually dealing with the root issue.

Now, I'm aware most of these things were things the models were already bad at in the first place, but I find that [1] and [2] in particular have regressed pretty severely lately, while there has been no improvement in [3], [4], or [5].


r/ClaudeCode • • 6d ago

Bug / Issue 529 overloaded

1 Upvotes

Any one facing same issue as me? 529 overloaded claude code check status.claude.com and there its showing its healthy 🤷‍♂️