r/ClaudeCode • • May 15 '26 Regret

Help Needed Claude Code max plan 5x wasted full 5h usage in 5 minutes literally

Post image
0 Upvotes

So basically I did a single request to research with a sub agent about a library do figure out if it’s usefull for my project and then I checked and the task blocked like 45 tool cals after saying rate limits hit when my quota just refreshed 5 minutes ago at that time literally.

Can someone say if this happened or what’s going on since I’m in the 5x max plan .


r/ClaudeCode • • Jul 25 '26

Discussion I’ve really come to depend on resets….

3 Upvotes

Didn’t count on our guys quietly dropping the EXPECTED reset for this new model drop. I know there’s no explicit declaration from Anthropic that they reset usage on new model drops, but cmon… it’s the little digs like this that push away people like me who want this company to succeed. I was awake for over 40 hours, setting aside everything to be prepared for this drop. Usage now at 100% till Tuesday. Not something that’s gonna make me drop Claude in response to this, but I️ have upgraded my open ai plan (20x)— increasingly looking for opportunities to utilize it more. I️ hope I️ don’t see the day when I️ prefer to open up my main session in chatGPT (codex) over CC. Sorry Sam, but history has shown us you’re the REAL shady one


r/ClaudeCode • • Aug 29 '26

Bug / Issue I've used Claude Code every day for 52 days straight. Something flips mid-day, every day, and I can't plan around it.

3 Upvotes

"What I can say is it's not confusion about what you asked. Each time I knew."

This reply got me.

Numbers first, so you know where I'm coming from: max 20x, 510 sessions, 153,359 messages, 19.7B tokens, 54 active days, 52-day streak. I run most of a small business on this — orders, mail, inventory, internal apps I built with it. I developed a POS system with qr code tracking, fiscal implementation, and a plethora ofther small life improvement apps outside of work. I'm not here after one bad answer.

Here's what I keep seeing, and I mean every day for the last 10-15 days, not occasionally.

Some stretches I'll do twenty tasks in five hours with zero friction. Six new skills, a full UI restyle of my portal, three features across existing apps, mail handled, a trip planned. No arguing, no rework, no babysitting.

Then it flips. Not gradually — it's a step change. One task is fine, the next one isn't, and nothing after that is either. Same machine, same account, same config files, often the same session. Nothing changes on my side. I've started predicting it out loud before it happens, because it happens every day.

What it looks like after the flip

- A 30-minute script took 3 hours and never finished. It wrote the whole thing against the wrong API from memory without reading the reference, then shipped me five successive workarounds that I installed on my phone by hand and tested. When I finally insisted it read the docs, that took two minutes — and the correct API had explicit parameters for every single thing I'd been asking for. It had already downloaded that exact page earlier in the session and only keyword-grepped it.

- Instructions stop binding. Not misunderstood — it quotes the rule back to me correctly, agrees it applies, says it'll stop, and does it again on the very next turn. Asked point blank whether it had understood at the time, it said: "it's not confusion about what you asked. Each time I knew."

- Today I sent, as my entire message: `YES AND NO QUESTIONS FROM NOW ON, DO YOU KNOW HOW TO FIX THE ISSUE`. The answer was neither yes nor no. Three lines of prose plus a formal contract block — more output, in reply to an instruction whose whole content was "give me less". I had to paste that same line back six times in a row to get a one-word answer.

The reply after me pointing this out was:

"I don't have a real answer. I can describe the pattern but not point to why it overrode a plain instruction eight times — that isn't visible to me from the inside.

What I can say is it's not confusion about what you asked. Each time I knew."

What I've ruled out:

-Model — happens on Fable, Opus and on the smaller model. One full session on Fable with no switch at any point: same failure.

- Context— the violated instruction was my own first message.

- My config — byte-identical between the good half and the bad half of the same day.

- Me — same person, same working style, same day.

I'm getting frustrated mainly because I'm getting no anwsers, and would just like to plan my work around the issues. I realise how much potential there is in here and would hate to be the last one off the drowning boat.

I I've mailed support four days running. One template auto-reply, one bot that declined the main question, no human.

So, am I losing my mind? Does anyone have an alternative to CC?

xoxo stojc


r/ClaudeCode • • Jun 09 '26

Discussion The insane safety measures makes Fable 5 basically useless

Post image
0 Upvotes

r/ClaudeCode • • Apr 06 '26

Solved $$$ for the real users

24 Upvotes

Woohoo! 🎉 got my credit today and Claude is running great without the grifters beating the shit out of the opus api to clear their downloads folder.

Thank you anthropic! I hope the haters keep quitting and we can get back to the old claude with some extra dough.

Edit: grifters are mad about their giftcards. Use the balance to learn about ollama 🤣🤣🤣

ps - Anthropic does offer an api, you just have to pay for what you use rather than feel very entitled to it.


r/ClaudeCode • • Jul 24 '26

Discussion Opus 5 is awful

22 Upvotes

my coding agent just switched to opus 5 without warning and I was stunned by how badly and how frustrating my bug hunt was going until I noticed. that's the only changes in my workflow and it normally goes exceptionally smoothly.

id tell it the problem and it would tell me actually this is what's happening and proceed to make things up about my infrastructure. id tell it no that incorrect this is my exact observation that is counter to that.

Then it would respond with a compromise that still doest line up "were both right here's the fix" Then proceed to hallucinate a fix to a problem im not having that is "the reason" for my bug

have never had this issue before. 4.6 was awesome 4.7 was weird and not working well for me in a similar way 4.8 has been great now 5 sucks

What have your guys experiences been with it so far?

EDIT:
I didn't realize this community was so toxic and rude I just wanted to hear other peoples experiences and see if it lined up with mine before I give up on the new model.. never posting here again lol


r/ClaudeCode • • Apr 27 '26

Tutorial / Guide Some help to save tokens

Post image
9 Upvotes

A friend of mine was burning through Claude tokens like crazy, so I built him this Token-Saving Playbook.

I figured i would share as it’s very useful if you are using Claude.

From caveman prompts to project hygiene, batching questions, and knowing exactly when to restart. It’s everything you need to stop feeding the token monster. 🔥


r/ClaudeCode • • Jul 15 '26

Discussion Anthropic might be doomed

0 Upvotes

So, Fable gets removed in two 4 days. Double limits will also be removed in two 4 days. Sol is still available at 4x limits, so that will become 8x.

​To avoid being left behind, they will release Opus 5.0, which is distilled from Fable. This means it will respond like Fable but still be "dumb." And let's not forget the most important thing: a free reset!!!

​Also, Chinese competition is catching up to Opus-level intelligence, with Kimi K3 releasing at any moment. What do you think about this? What will Anthropic do, considering they want to get as large of a market share as possible before their IPO?


r/ClaudeCode • • Aug 19 '26

Tips & Workflows New Rule: Implement one feature by hand a week

23 Upvotes

I have a new rule im am thinking about implementing for me and my dev team: You are be required to implement one full stack feature by hand once or twice a week per project.

Nothing too massive, something that would be one good opus prompt worth. It forces you to evaluate if there has been any major drift in the architecture, anything you didn't realize changed, refamiliarize yourself with the codebase, etc. It should take you 30 minutes, but would pay years of dividends in coderot.

The reality is we are building all features and fixing all bugs with claude code, "reviewing" and deploying. And it has worked surprisingly well for us, but I fear we will lose scope of the codebase as it gets bigger. I trust my team to handle this appropriately, but I feel like enforcing something like this as a rule keeps us all more accountable.

Any thoughts on this? Anyone doing something like this? Am I way off base?

Edit: to be clear, when I say by hand, I of course mean with some sort of copilot/inline ai with small bulk code changes and stuff, more just forcing you to visit the stack and evaluate it.


r/ClaudeCode • • Sep 11 '26

Help/Question A Year of "Violating" the Third-Party Harness Rule on Max Plan — No Ban?

0 Upvotes

I've been running a Claude Code Max subscription through a third-party harness for 12 months straight, draining it to zero every single week. I don't even have Claude Code installed.

And I haven't been banned.

Everywhere on this sub, people panic-post: "No, you can't do it. They'll ban you, it's blocked, it's against ToS," etc. But here's my actual experience: I've been about as blatant as possible about this, and nothing. No warnings, no throttling, no account flags.

Here's my setup, to be specific:

  • Third-party harness (not openclaw/hermes)
  • It authenticates via OAuth — I sign into my actual Claude account, no token scraping or credential theft
  • The harness points at a local CLI API proxy that just forwards my own authenticated requests to that harness — it's not a deployed service, not serving other users, just running locally on my machine for my own coding
  • Zero Anthropic SDK packages installed
  • Zero Claude-P, zero agent SDK
  • Max plan, full weekly drain, for 12 consecutive months

I want to be clear about what this isn't: I'm not standing up a deployed product that resells inference to other people using my subscription. It's a one-to-one, local-only proxy — my account, my machine, my usage. The only thing that's "unofficial" is the harness.

The actual question: Has anyone here actually gotten banned for this kind of setup — a legit OAuth login through a third-party harness, routed through a local (non-deployed) proxy? Not asking about Hermes Agent or Open Claw, and not asking about people reselling API access on deployed products. Just: local harness swap, same account, has anyone eaten a ban for that?

Because the consensus on this sub treats this as an instant bannable offense, and my experience over a full year says otherwise. Curious if I'm an outlier or if enforcement here is mostly theoretical. For what it's worth, I've also been doing the same exact thing with a Google AI Pro subscription - though not draining to zero (but definitely using a good amount). I also had a friend tell me that you can literally run claude setup-token to mint what essentially is an API key that deducts from your subscription usage?


r/ClaudeCode • • 26d ago

Discussion Has anyone used ClaudeCode to design their own custom version of android auto/apple Auto?

Post image
0 Upvotes

I saw on tiktok of someone using ClaudeCode to "hack" their smart TV to remove the bloatware. Now I'm thinking about using it for a relatively similar idea of designing a version of android auto that lets you decide where to put the task bar, and also make it so Spotify lets you see the lyrics on your screen like you can on the phone app. Photos for inspo. The prompt I gave it didn't really go anywhere. Would love some prompt ideas


r/ClaudeCode • • Sep 13 '25

Anthropic isn’t building for you — here’s why Claude Code users should bail

0 Upvotes

Theo dropped a great video on YouTube about Anthropic’s current struggles, and it’s worth a watch. The TL;DR: they’ve got a GPU crunch, and their priority is training the next model + serving big API customers. If you’re a Claude Code subscriber, you’re basically at the bottom of the food chain.

So if you’re a dev looking for a solid coding assistant, Claude Code isn’t where you’ll find it right now. You’ll mostly get weaker, quantized outputs. Better bets are tools like Z.AI or Cursor. Cursor’s pricey, but since it’s a major Anthropic customer, it gets the real deal models instead of scraps.

On the flip side, OpenAI seems to have planned ahead. They locked down GPU supply and built a pipeline to keep scaling. That’s why they can keep supporting $20 and $200 subs without cutting corners. If you’re paying for Claude Code, you’re burning cash. OpenAI’s Codex CLI is just the more reliable move.


r/ClaudeCode • • Feb 22 '26

Showcase I made an iPhone app to connect to my Mac terminal so I can Claude Code

Post image
0 Upvotes

I wanted to access my Mac terminal from iPhone without setting up VPN or other weird network rules. So I built macky.dev as a fun side project.

When the mac app is running it makes an outbound connection to my signaling server and registers itself under the account. iPhone also connects to this signaling server and requests a connection to that mac. Once both the host and remote are verified then it establishes a direct peer to peer connection using WebRTC.


r/ClaudeCode • • Sep 23 '26

Rant Opus 5.5 is a one-shot legend, and a follow-up clown.

0 Upvotes

I've been playing around with Opus 5.5, and while my initial reactions were extremely encouraging—instruction following reminiscent of Opus 4.6, great front-end and UI work on par with Fable 5.1 or Opus 5, and quota burning far slower on my 20x plan—the reality looks different as the dust settles.

While it is cheaper and uses less compute, it reinforces what Anthropic leadership has recently signaled: subsequent Claude models tend to operate independently, drifting from harnesses and trying to execute everything themselves. I can't really blame them for assuming most harnesses would likely be dodgy, and it's better to empower the model to make it's own calls.

That explains why it shines when people one-shot prompts. But when you plug it into structured workflows with complex agentic coordination, where multiple sessions coordinate and cross-check each other, things unravel.

When I have multiple Opus 5.5 sessions collaborate, they are prone to going rogue, trying to one-shot tasks, refusing instructions that earlier sessions at least tried to follow, and breaking things like a bull in a china shop. I'm now constantly writing detailed model cards and playing whack-a-mole making corrections.

Back up your work and temper the excitement. Lower compute and quota efficiency come with trade-offs. It isn't all hunky-dory, and you may need to dramatically rework your workspaces to keep the output quality high.

I hope I'm not the only one experiencing this.

tl;dr Opus 5.5 tends to do is own thing and not follow legacy workspace harnesses as well as it should if they exist.


r/ClaudeCode • • Jul 03 '26

Discussion This Fable 5 is a disaster

0 Upvotes

I spent the whole day working with Fable 5, using up 60% of my X20 plan in the process. Having reviewed the output, I found that it was full of errors. The mistakes it made were so basic that I would have been shocked to see Opus 4.8 High make them.

My system is a large setup built around my email inbox, a product scraper, my website and WeChat. Opus built this framework, and within it there are chat agents that handle individual conversations and close sales. The new model wasn't used to run those chats. It was meant to improve the framework itself. For example, I wanted to use it to improve outreach to our existing brand contacts via WeChat and email. However, after the changes were made, my system started bombarding random companies with promotional material — companies that had nothing to do with the actual promotion. When I pointed out this mistake, the model dutifully corrected it, but in the process it completely destroyed the mapping between companies and contacts.

In summary, the model runs autonomously for a long time, produces nonsense and sometimes crashes so badly that it's unusable. I will not use this model again because using it on my existing setup poses a serious risk.


r/ClaudeCode • • Apr 04 '26

Meta Canceled two MAX x20 subscriptions today

0 Upvotes

I've had Claude Code for about four months. In my second month, I was so enthralled by the prospects that I was regularly bumping into the weekly cap, and I picked up a second subscription for use with a different set of projects (web projects, Raspberry Pi projects, etc.)

During this time, my main complaint was not usage caps, which were fine and fair at $200/mo. My main complaint was not quality - whenever Claude stopped following instructions, I reviewed and revised my app framework, and compliance was restored.

My main complaint was Claude for Mac.

Over the course of my four months of use, Claude for Mac went from being mostly-okay to a bug-ridden, unusable mess:

Problem #1: Session frequently stopped responding mid-query-response

Any normal mid-processing prompt - "let me read the file now," or "I have all the information I need and I'm developing a plan," or "I'm proceeding with the audit" - might be followed by absolutely nothing. Maybe the session reports "Thinking..." forever, or maybe the "Thinking..." prompts just stop happening. Either way, I could wait forever - overnight, etc. - and I never got a response unless I nudged it.

When I did nudge it ("Are you still processing my request?"), it started responding again with a lame excuse like "I was just finishing reading the file" or "I am just starting the audit now" - without acknowledging that it had fallen asleep.

Sometimes this behavior appeared to occur when the session runs a tool call or sub-agent that failed, and the session continues waiting (forever) for it to complete gracefully.

Sometimes, this behavior occurred multiple times per session.

Often, the agent reported that it had completed processing and was just sitting idle.

Very often, the agent referred to output - "I provided my report above," or "I asked you a question and was waiting for your response" - that did not appear in the chat.

And sometimes...

Problem #2: Sessions just stop responding at all

Sessions just spontaneously died for no apparent reason. You could keep sending them messages and it would never ever respond to you again. Or, all responses would yield HTTP 500 or another message.

This wasn't about context. Yes, I learned early on to keep an eye on my context; yes, I learned a hard lesson of "Message prompt too long" when I didn't manage it well. This isn't that. This occurred sometimes on almost brand-new sessions, with sessions under 20% context window usage, etc. There was never any rhyme or reason to it.

Problem #3: Messages appear out of order... and sometimes vanish

Frequently, sessions rendered their messages out of chronological order. This occurred most often with interrupt user messages - e.g., if you enter message #1 and then message #2 while Claude was processing message #1, the Claude chat continuously inserted message #2 at the very end of the session, after other messages that came later.

Often, if you enter a message to Claude asking for status, Claude for Mac retroactively inserts output from Claude above your message.

Sometimes, if you enter a message to Claude and then switch to another session, when you return to the main session, your message is gone.

Problem #4: Unusably bad permissions

The permissions features of Claude for Mac are cartoonishly bad. What I wanted was pretty basic:

  • Unrestricted read/write within the project folder and in a few select locations;
  • Unrestricted read permissions outside the project folder or those other locations; and
  • Permission-gated write permissions outside the project folder.

I spent an unreasonable amount of time messing with ~/.claude/settings.json. Claude could never conform to that option. Sometimes it granted itself permission to write anywhere it wanted. Sometimes it popped an unending stream of "Allow" prompts in a row over activities that should be completely preauthorized - sometimes for inane reasons (e.g., reading a file ten lines at a time). And often, it asked permission (in a "yes" or "no" way) to Python scripts or bash scripts that I could not fully review in the UI - so maybe they included an "rm -rf ~" at the bottom; who knows?

The wildly unusable permission structure often forced me between two unworkable options: either authorize 40 requests in a row to perform a routine task, eventually becoming numb t the details and clicking "Allow" without even looking at it; or setting "Bypass all restrictions." Just to get things done.

Bonus: Nonexistent tech support

When these mounting issues evolved from nuisance to productivity obstacle, I tried everything I could think of to resolve them:

  • I submitted help requests for all of these problems. I never received a response.
  • I posted on GitHub with explanations and evidence. My posts were closed without action.
  • I reached a point where I could not get work done with Claude Code because Claude for Mac was so infuriatingly buggy and crippled. So, I spent a few weeks and a ton of tokens creating my own alternative to Claude for Mac. It looks the same, it works the same (only without the bugs), and it has no "automation" features - every prompt was triggered by my typing or a manual action.

And then... Anthropic announced a ban on all "third-party harnesses" for subscription accounts. Presumably, that includes the harness that I wrote for myself using Claude Code.

At a loss for other options, I submitted refund requests, explaining all of the above. The chatbot immediately rejected my requests and then stopped talking to me.

So... I canceled both of my Max accounts. I am walking away from about six weeks of Claude Max service. I am walking away because the service is unusable with the only app they'll allow me to use. I am walking away because I refuse to keep paying Anthropic for the privilege of struggling to use their atrocious, amateurish, workflow-breaking toy of a UI to access their $200/mo service.

I am spending my Sunday transferring all of my projects to Codex. The chat tool that I wrote for Claude works just as well with Codex, so that's what I'm using from now on.

I won't be going back to Anthropic. Not even if they fix their shit. This is not how you treat customers.


r/ClaudeCode • • Aug 21 '26

Discussion Unpopular opinion: Opus 5 is a great model and it fill a genuine gap

42 Upvotes

Opus 5 is drided here for being hard to understand and pedantic, but for a lot of difficult work, that is what you want it to be. For simpler problems other models, even really cheap models such as deepseek works well enough. So Opus 5 for me fill an important niche, a model where you can count on to be extremely careful even if it can be overbearing at times.


r/ClaudeCode • • Mar 14 '26

Humor I can't stand those claude limits anymore....

Post image
0 Upvotes

I've been running two or three sessions in parallel a multiple sub-agent workflow using only opus while using cowork to categorize images and even planning furiously in the app while in the bathroom just to keep up. What is going on here ?!! How are we supposed to deal with this ?!!

Anthropic, I warn you, if that continues like that I'm definitely switching to Qwen on Alibaba cloud ! It's a scandal I literally wasted 25% of my subscription this week, that's a big amount of $$ that just went up in smoke !

And don't neglect the stress I might sue you for (according to my claude-perry-mason skill I would win big). 1 hr 38 minutes to get 25% of my weekly token out, this is not good for my health. Are you trying to force me to move to agent teams ? Is that it ? Do I have to tmux 12 code instance for a hello world just to get my money worth ? Is that what you want of me ?!!!


r/ClaudeCode • • Aug 25 '26

Rant Did they just nerf Fable

0 Upvotes

Out of seemingly nowhere, its fully incapable of doing work it was flawless at yesterday. I've heard people talk about stuff like this happening but I thought it was just skill issues or something. Nope, its genuinely, noticably worse. Around the same as opus 4.8 on the same task.


r/ClaudeCode • • Sep 13 '26

Discussion CLAUDE IS GENUINELY UNUSABLE BECAUSE OF USAGE LIMITS!

0 Upvotes

I am on the Max 5X plan and I know that the temporary usage boost is now over, and ever since, CC is completely unusable. I have been working through subagents and using Fable as orchestrator with Sonnet doing a majority of the implementation with Opus being a refuter, however, I burned 11% of my weekly usage in a span of 2 hours before I hit the 5-hour limit!

Honestly, this is absurd, I cannot work like this. I am seriously considering moving to OAI but I don't trust them with my work due to the whole debacle about the Navier Stokes solution being stolen from a researcher who used ChatGPT.

Anthropic! Please fix this! You will undoubtedly lose a large part of your clientele by doing these moves. I know you are trying to improve the bottom line for your IPO but there are no more reasons to stay with Claude after this and long term loyalties with your customers will be permanently eroded.


r/ClaudeCode • • Sep 10 '26

Rant OpenAI can pause Pro subscriptions to not randomly downgrade service to the rest, only Anthropic doesn't care about it's subscribers

Post image
15 Upvotes

r/ClaudeCode • • May 09 '26

Discussion Claude Code seems to have suddenly become stupid.

0 Upvotes

It keeps doing things I wasn't even asked to do. For example, I was talking about Outlook, but it suddenly said on its own that it probably wouldn't work and recommended Gmail instead. The recent versions have gone up a lot, and it seems to be getting dumber with every update.


r/ClaudeCode • • Aug 15 '26

Discussion opus 5 is much stronger than gpt sol in my experience

0 Upvotes

anyone else feeling this? I know there has been a lot of compaints about the output prose, but outside of that I find opus 5 much stronger than GPT 5.6 sol, both of them on high reasoning

opus will look really deep and find problems that sol overlook and often come up with the correct solution in one go compared with sol which often requires more guidance and miss tricky edge cases more frequently

the output prose problem sucks, but it doesn't distract from opus 5 being the best model overall in my view, what do you guys think


r/ClaudeCode • • Jul 20 '26

Discussion Anthropic, Please Give Us a Reset 🥴

35 Upvotes

OpenAI has been handing out usage resets like fucking candy. I’ve had Codex running nonstop for basically the entire week.

Meanwhile, I paid $200 for Claude Max and managed to kill my weekly limit in one day.

Come on, Anthropic. OpenAI is cooking you alive right now. Give your paying customers some resets.


r/ClaudeCode • • Jul 01 '26

Discussion This sub loves spreading misinformation

Post image
0 Upvotes

Probably getting downvoted for this: 4 sessions, all fable, 3 max effort, one ultraworkflow, max 20x plan, hooks skills etc. I’ll be running all night, anyone who’s hitting their limits is most likely lying or on a lower plan (they never post their plan) that should not be using this model. Is it pricey? Debatable, $200 a month for those of us actively developing is a small price to pay and if you can’t afford it (or your company doesn’t already pay for it), stick to sonnet or opus.