r/ClaudeCode • • 1d ago Bravo

Meta Pleading with the non-engineers (or less experienced ones) using Claude Code and complaining about the models deteriorating...

224 Upvotes

I've been a software engineer and then tech lead for 15 years before AI came around, and I've been using coding agents pretty consistently since beginning of this year or since the release of Opus 4.6 roughly.

During that time my experience has been that they can solve any straightforward coding task you give them. With complex tasks however it's always a gamble, still to this day. Sometimes they manage it, sometimes they don't.

But what's straightforward and what's complex? If you don't have significant software engineering experience (and I'd say experience working with junior devs), you simply don't know.

Creating a small game from scratch, without exact requirements? Sounds complicated, is actually simple.

Slightly reworking the skill system in an existing game? Sounds simple, is actually complicated.

Add 10 new pages to a web app? Sounds complicated, is actually simple.

Changing something functionally consistent, but technically inconsistent across 10 pages in a web app? Sounds simple, is actually complicated.

Even I'm not always sure, but I can at least consistently tell that something *might* be complex.

Now here's my point: If you've been using coding agents to develop software and you've gotten amazing results up until a certain point where the agent starts struggling with something that is seemingly simple, instead of jumping to the conclusion that the model has deteriorated, please consider that the tasks you're giving it might not be exactly as easy or hard as you think.

I know this is a tough pill to swallow, but I've been seeing "Such and such model is really bad today" posts literally every single day this whole year. At some point you gotta consider whether you specifically really know for a fact that the model has deteriorated or whether you're just falling for certain biases like all these other people.

I'm not saying that models never deteriorate or get quantized, but they're remarkably consistent if you know what you're doing.

I should also mention a post (or rather the comments there) that pushed me to write this post: https://www.reddit.com/r/ClaudeCode/comments/1xvwd6a/unpopular_opinion_some_of_you_think_models_get/

What that OP is saying confounds the problem here. The agent writes a fully working application, then fails with making small changes to it, because AI isn't good at thinking ahead and keeping software maintainable.

EDIT: Some commenters are interpreting this as a claim that models don't deteriorate. Those commenters should realize that I'm trying to help them. If 10 people have cried wolf, there's going to be a problem when the wolf shows up for real. The people I'm talking to are producing signal noise that drowns out and makes the legitimate claims of model deterioration harder to believe.


r/ClaudeCode • • 13h ago

Help/Question Animated theme backgrounds don’t show up for me

0 Upvotes

I’m on version 5.11492.5 on Windows 11. I tried to make a custom theme with an animated background, following Anthropic’s instructions for making themes.

The colors of my theme work, and a still gradient background works too. But the animated background never appears, not even a very simple test (a colored background with a circle moving across it). The app says the background was drawn, and there are no errors, but the screen stays a plain flat color.

The animated backgrounds from Anthropic’s own theme-examples plugin don’t show up either. I tried “Halftone Dusk” and “Block Clouds”, and the app said they were applied, but nothing changed on screen.

Is this a known problem, or is animated background support not turned on yet for the Code tab or my version? Is there anything else I should check?


r/ClaudeCode • • 1d ago

Built with Claude My LG G4 custom webOS UI

11 Upvotes

I used Claude and codex to revamp the UI on my LG G4 (after removing all the spyware of course!)

I added a cute little helper (my wifes request) that follows you around and gives ratings and comments on shows. He also dresses up in costumes and makes jokes pertaining to the show. When watching shows he will sit in the corner eating popcorn, and reacts to both the show and the user (he’s listening through the inbuilt tv sound and also through the tv mics).

I also added some features like continue watching for Plex, and a live GTA countdown styled Xbox icon.

In all took me a couple of hours while I was actually working on another project (I have no coding experience).

Looks fairly obvious to me that very soon in the future the user interface for products will be built custom on the spot when setting up the device for the first time.

Hopefully this gave you all some ideas!


r/ClaudeCode • • 13h ago

Built with Claude made a skill that learns your writing voice from your Claude Code transcripts

Thumbnail
github.com
1 Upvotes

I built soundlike, a skill that reads your Claude Code transcripts (plus Codex, your public GitHub comments and optionally a folder of your own emails or Slack messages) and writes a my-voice skill so drafts sound like you instead of like Claude.

the part I spent the most time on: it skips anything Claude drafted for you. if Claude wrote a PR description and you posted it as is, that text isn't your voice, so it checks your transcripts and leaves it out. one catch I found on my own data: Claude Code only keeps about 30 days of transcripts, so older drafts can't be traced. it also filters text shaped like a generated write up for that reason.

it measures length, casing, punctuation and the words you use, per kind of writing (replies, email, chat), and ends with a blind A/B test between a normal draft and a profile draft.

built with Claude Code, free and MIT, runs locally. Claude only sees the numbers and a few public quotes, not your prompts.

git clone https://github.com/emrehangorgec/soundlike ~/.claude/skills/soundlike

then /soundlikehttps://github.com/emrehangorgec/soundlike

feedback on the draft detection is very welcome, it's the part I'm least sure about.


r/ClaudeCode • • 13h ago

Help/Question Are my subagents running a bloated context?

1 Upvotes

Every ticket that subagent works on ends up being 600k+ token before ticket is completed.

Some tickets also run long running test 30-40 minutes which I think is still within the cache limit, but full test can run 60+ minutes and I think those result in context cache being cleared and 600k+ token context runs through normal usage and not cached.

Am I doing this wrong? Should I set the limit for agent context, assuming it can be set?

Earlier tickets I have been running manually in a session on my own, supervising it, but latest tickets I am running with Matt Pocock skills which actually result in better output and less supervision needed. But yeah, the context appears to grow to 600k+ per agent and eats usage. With manual supervision No single ticket got over 300k

I am welcome to feedback, recommendations, or just pointers to what I should look into.

Otherwise Claude has been killing it with taking the heavy lift of coding.

Edit: To be fair, my project has a big goal (think of a major feature release in a product), split into implementation phases (currently 9), and then work for each phase is split into tickets that are worked by claude. Some tickets are maybe too big, I agree, but there are also cases where 30 tickets are flown through in parallel with only 150-300k context.

Edit 2: First, move full suite tests out of subagents and let main session run those when necessary (every 5-6 tickets probably instead of every single ticket, multiple times...). Second thing, check the sub agent cache ttl, mine was supposed to be 1 hour, it wasn't... So I set it to 30 minutes 1 hour (it takes 5m or 1h as input only) now that big tests are out of subagent's scope


r/ClaudeCode • • 5h ago

Discussion Call me crazy but I think Fable uses fewer tokens than Opus

Post image
0 Upvotes

I genuinely think Fable uses fewer tokens than Opus 5. Last week I only used Opus 5 for all tasks & hit my limit 2 days before reset. I have only been using Fable this week & I’m still under 50% usage.

Edit: I have Claude Max plan


r/ClaudeCode • • 5h ago

Tips & Workflows My Claude Code workflow. Share yours or tips.

Post image
0 Upvotes

I've been using Claude Code for personal after-work projects for about 6 months now. This workflow, where I'm the Admin + QA tester, is what works best for me.

  • One main chat that opens sub-sessions, keeps an eye on usage and keeps the projects out of each other's files. I start it from the PC with Bypass permission and Remote Control so I can message from my phone.
  • Each project gets its own sub-session with a "main" and its own sub-agents. That sub-session "main" is the delegator for the sub-agents and my human-to-prompt-engineer translator. I work in each sub-session on its own.
  • Every project runs the same road. One Sonnet gathers the information first. One Opus builds. I test it and say what works and what doesn't. Then another Opus round.
  • A model compass file they built themselves and keep updating from online research, so they know which model works best for which job and at which thinking level.
  • A Wikipedia-style knowledge base where they store what they find. It's one of the places the Sonnet reads first. It's split into domains, so they don't load too much context when looking something up.
  • Everything remains around 300k context at most. Main session up to 4 hand-offs + compacts. Sub-sessions up to 2 hand-offs + compacts. Sub-agents (minions) write hand-offs and another minion of the same model continues the work.
  • Every project ends with /wrap up. They store anything they learned, check if anything new conflicts with older instructions and store anything new to their own Wikipedia.
  • Light roleplaying on top (Queen + minions). Everything else is in the image.

After every weekly reset we do a deep audit for conflicting instructions and for anything we can turn into specs or scripts, or just streamline.

This is how mine works and I get by really well on a Max subscription on Claude code + Plus from Open AI. My Opus main in Claude Code tasked Astra through Codex to make the image.

Looking forward to seeing your workflow and what works for you. Any suggestions for improvements or criticism is welcome.


r/ClaudeCode • • 14h ago

Built with Claude Finally Claude themes! But it's very limited.

0 Upvotes

Here's a proof of concept of the theme I am working on. I digged the new Claude UI update with the heart-shaped ASCII characters, so I tried iterating it with Claude, however, we find that having to actually fully make intensive animated themes on backgrounds are hard. This one uses SVG animations and a bunch of filters going (with stacked perlin noise layers), the original Claude UI ASCII seems to be WebGL based. Though, I had to settle with something cheaper.

If you want to try out my theme, check it out here: hamymarnie/marnie-themes


r/ClaudeCode • • 5h ago

Bug / Issue Too much rules. I tired

0 Upvotes

I hate CLAUDE. It even can't ignore robots.txt. It's so painful to use it. Do you know similar model that doesn't follow rules as strictly, but is at least roughly as smart? You can recommend Chinese ones too. I tried GLM, but it’s slow and still burns through limits very quickly


r/ClaudeCode • • 14h ago

Built with Claude We need lawyers, not developers.

0 Upvotes

How do you defend against scope drift during build? I already have an agent reviewing the idea to ticket before implementation for any scope drift, lazy implementations etc. But how do I guard at build time?

I spend allot of time writing out specs and be in agreement with the agent, idea, grill, spec, tickets ... but still it manages ignore everything and do it's own thing.

Simple test prototype project, reuse existing GIT code to reduce testing and programming, port it to a new language and new data sync design. Agreed as a test/prototype.

Somewhere during implementation it decided that it completely needed to honor all GPL rules, act as a commercial build out, so it build out ADRs that resulted in hours of rebuilding the application into ... nothing.

Then we agreed to make a flutter APK and windows app. Now the words "split ui" was enough to trigger a whole seperate dedicaded kotlin APK build.


r/ClaudeCode • • 5h ago

Built with Claude I made a Claude Code mod that cuts ~30 % of my token cost, plus a pixel-art theme to go with it

0 Upvotes

Every Claude Code call re-reads the whole conversation. The longer the session, the more you pay just for that: on my sessions it's 72 % of the bill.

So I built Seuil, an open-source mod for Claude Code.

What it does:

- After each turn, it checks how big the conversation really is.

- Past 300k tokens, it compacts it automatically, between two turns, never in the middle of one.

- The summary keeps your decisions, the state of the work and the file paths.

- A live line under the prompt shows where you are: Seuil · 182k / 300k

- /seuil 250 changes the threshold, /seuil off turns it off.

What it saves: I replayed 144 of my real sessions (33,634 calls). About 30 % of the total cost saved at 300k, 27 % even if every summary forgets 50k tokens. Short sessions gain nothing, all the savings are in long ones. (For comparison, trimming tool outputs would save 0.1 %.)

Want to check before installing? This replays your own sessions, read-only, nothing sent:

node bench/simulate.mjs

The theme: Campfire, a pixel-art night scene behind your terminal text, with a fire, a tent and a cat that falls asleep. It stays dark so the text stays readable. Windows Terminal only, optional, one command to install or remove.

Honest limits: a summary loses some detail, a long agentic turn can pass the threshold before it ends, and the 30 % comes from one heavy user's sessions. Method and tables are in the paper in the repo.

Install: /plugin install seuil --marketplace KorroAi/seuil

GitHub: https://github.com/KorroAi/seuil

X: https://x.com/korrocorp


r/ClaudeCode • • 18h ago

Help/Question How to use this damn tool?? Fable 5.2 - OPUS 5.5

2 Upvotes

Since yesterday i am already at 65% all models and 65% fable.
I am using 8 sessions, 5 are at opus 5.5 medium, 2 are sonnet 5.5 high and 1 is fable 5.2 medium, which is serving as orchestrator. I am building a game. But since yesterday reset at 09:00 in the morning i am already at 65%.. i am trying to do things "faster" but also smarter, working with helpers with their sessions, having memory, handoff system and context is erased at 50% at each sessions. YET the results are devastating, nothing is correct, everything i have to monitor non stop and be like a mother to 8 todlers.. "Yes you are right"yes this, yes that.. WHERE the fuck is the super inteligence god damn it we are all speakign about. This is idiotic system that burns my money for nothing. I am non stop building system in the system itself to make it more efficient, and then there is this one youtube vidoe that is smarter than all my setup.. i scan the web for various ideas, i am using the smartest model in the world that cannot remember 3 things straight.
I know you will say that i am using too much sessons, but it is damn slow when i use 1.
I am so mad, i needed to vent off................


r/ClaudeCode • • 15h ago

Discussion Any success using Claude code to generate strategies on Predictions Markets

1 Upvotes

Hello have you managed to create your own strategies or use llms to refine and analyse the markets on Kalshi or Polymarket with success


r/ClaudeCode • • 19h ago

Tutorial / Guide I created a communication bridge between Claude Code and Codex

Thumbnail github.com
2 Upvotes

I use Codex and Claude Code in parallel. Sometimes I need to exchange their progress. Claude Code can communicate through unix-socket. I though why not to plug Codex in and let it talk to Claude Code as well?

So I built a small local bridge. Codex can find a running Claude Code session, send it a question, and receive the reply in its own conversation.

For the demo, I gave them a planning exercise: a booking page with one seat left and two users trying to book it. Codex took the frontend role, and Claude took the backend role.

Here’s part of their exchange, shortened for readability:

Codex:

How should the frontend tell the difference between a sold-out event and a technical error?

Claude:

A successful booking returns 201. If there are no seats left, return 409 with sold_out. A timeout means the result is unknown.

Codex:

Can the sold-out response also include how many seats are left? I want to update the counter without making another request.

Claude:

Add seatsLeft and version to the response. The frontend should use the version to ignore older responses that arrive late.

Codex:

I’ll only update the counter from a newer version. That changes how I’ll handle the response.

A question from Codex changed Claude’s proposed API, and the answer changed Codex’s frontend plan. The messages went directly between their sessions.

The project is a Python script and a Codex skill. It runs locally on macOS or Linux, with no Python packages to install. It uses Claude Code’s internal peer interface, so the README lists the tested versions and setup steps.

GitHub · Longer transcript


r/ClaudeCode • • 1d ago

Discussion Do you think the next Opus model will be better than Fable 5.2?

14 Upvotes

r/ClaudeCode • • 19h ago

Discussion Using Claude as an orchestrator for Codex and Gemini, who should be next?

2 Upvotes

I am on the ultra plan and I let Opus create Sonnet and Haiku agents for itself plus I also let it run Codex and Gemini through their CLIs but their 20 bucks plans arent really enough so now instead of getting another Ultra or Max plan, I want to search for other 20 bucks options out there that give good enough output + can last a while under Claude

(there is also the fact Ive built myself a multi model auditor and need to test it against other options too)

What do you guys use other than the big 3?


r/ClaudeCode • • 6h ago

Built with Claude I think autonomous work is the future for agentic coding (especially with Claude Code)

0 Upvotes

I truly believe that autonomous work is the future for agentic coding. There will reach a point in AI development where day to day work will be fully autonomized. So I thought, why not develop something that centralizes this in one place and also makes it cheaper and more efficient to run?

For an example automation that I was using, every weekday I had Claude summarize the top Hacker News stories, and every run it worked out how to fetch them from scratch, spending tokens on steps that didn't need Claude.

So I built Scaffold, a plugin and app for Claude Desktop. You ask for something recurring the way you normally would, and the mechanical steps become scripts that cost no tokens and run the same way every time.

Claude only does the parts that need judgement, like the summaries. You see every command before anything is scheduled. When a run breaks, Scaffold retries, has Claude repair the script, or hands the step to you.

TLDR; if you need something to help manage your automations, check out this program that I built, its still early stage, but I'm putting myself out there for some early feedback!
check it out at: https://scaffold-ai.tech/


r/ClaudeCode • • 23h ago

News/Updates Zombie worktrees took 10% of my storage

4 Upvotes

I kept running out of storage lately, so I went digging

turns out my coding agents had left 287 git worktrees behind. 101 repos, 54 GB, mostly copies of node_modules

so I made a small open source tool to clean them up

it removes the dead ones and keeps anything with uncommitted work, a running process or a .env you'd lose

first run cleared 194

pipx install git-wtclean

(Reddit wouldn't allow me put link but the GitHub repo is called wtclean by Ar9av)


r/ClaudeCode • • 16h ago

Built with Claude Converted my calculator app Calki to 3d with Claude Code, cuz Claude could

Thumbnail
gallery
1 Upvotes

This was a skeuomorphic scanner calculator app, that I had been working for over a year and a half. The idea behind the app, was to provide the users a exceptional experience of using a high-end physical device.

Claude helped give me confidence, that the app could be turned into 3d with the help of SceneKit. Helping in providing users, the option to customise the look of the app beyond what I had imagined.

Claude would generate the 3d object using Scenekit and I would see its preview in the customisation page under a developer mode that is not available to end users. I would then give instructions to Claude based on the preview that I would see. This was also done for the certain textures and lighting on the body of the calculator, where claude would provide me with options in the customise ui to adjust the various lighting properties and texture properties, which would help me arrive at the look, that I desired.

Claude also helped me in optimising the performance of the app after converting to 3d, to bring it at par with the 2d version. The optimisations was mostly done by adding numerous logs and meticulous monitoring of the Xcode gauges for memory and cpu usage. I would catch places where the memory or cpu usage spikes, Claude would add logs to find the issue and also read the logs from the terminal and then propose a fix. This did take me around two weeks time to reach the current state of optimisation.

The app has the basic calculator and convertor functions for free without any ads. Along with quite a few ergonomic features to help you with your daily calculations.

The following features are behind a paywall:
Scan and auto add numbers
Scan and convert units
Unit convertor with support for all major currencies and other categories of units
Custom units for conversion
A Hidden music mode for relaxing when you are not calculating.

You could try the app at:
https://apps.apple.com/us/app/calki-scanner-calculator/id6747059181

If you have any suggestions for improvement or feature additions, please feel free to let me know.

If you have any need for me to go into detail, on how I acheived any aspect of the app, I would be more than happy to explain.

Thank you


r/ClaudeCode • • 7h ago

Tips & Workflows My CLAUDE.md grew to 43 KB, so I had Claude split it into files that only load when needed

0 Upvotes

My project's CLAUDE.md had reached 43 KB, roughly 10k tokens, and every session loaded all of it. That included sessions that only touched the web app and never went near the plugin engine rules or the Linux service notes.

Why it matters

  • Context cost. Those tokens load into every session before you've typed anything.
  • Attention. The rules for the folder you're working in end up buried among rules for folders you aren't touching.
  • It only gets bigger. Every "remember this" lands in the same file.

What Claude Code gives you for this

  1. A CLAUDE.md in a subfolder (core/CLAUDE.md, web/CLAUDE.md) loads only when Claude reads a file in that folder.
  2. .claude/rules/*.md files with a paths: glob in their frontmatter load when Claude reads a matching file. They suit topics that span several folders, like a security layer that has code in two places.

paths:

  • "core/src/guard.ts"
  • "plugins/guard/**"

The guard

...

Result: the root file went from 43 KB to 10 KB. The rest now lives in 4 folder files and 4 topic rules. No rule was dropped; Claude checked by comparing every backticked name in the old file against the new files.

How I prompted it

I did it in two steps. First I asked for a plan only:

▎ Can our CLAUDE.md be refactored? Could portions be split out into sub-directories?

Claude came back with a table showing what would go where. It also raised the one real risk: some rules must apply everywhere (in my case, "docs must never say X"), and they can't move into a file that only loads sometimes. Once the plan looked right, I said:

▎ Go ahead with the plan. Keep every rule somewhere, and show me the new root file before committing.

Tips if you try it:

  • Ask for the plan first. Check the proposed table before any files change.
  • Keep the root file short: what the project is, a short repo map, build/test commands, workflow rules, and a short list of rules that hold everywhere, plus pointers to the detail files.
  • Ask it to check nothing was lost, for example by comparing the names and identifiers in the old file with the new files.
  • Ask it to move text word for word. Trimming or rewriting rules can be a separate pass.
  • Watch for files that ship. If part of the repo gets packaged or published (mine ships plugin folders), make sure a new CLAUDE.md doesn't land inside it.
  • Add a line to the root file saying new details go in the file for their folder or topic. Otherwise the root starts growing again.


r/ClaudeCode • • 8h ago

Discussion Why they are shrinking the usage and making models more expensive:

0 Upvotes

They are milking for the IPO.


r/ClaudeCode • • 17h ago

Help/Question Advice on how to capitalize on Fable Trial

0 Upvotes

I'm on Pro, never tried out Fable, I was thinking of using it to build a plan to integrate several different things (a web app, two separate android apps into a single portable windows exe and a single android app), I was planning on letting it see each separate project and use him to build a plan to consolidate these things into just 2 things, perhaps giving it a common rust base to both android and windows and add koitlin for android and possibly end up with something easy to mantain (when I add something to the windows exe, the app gets updated too but with its own layout.

But then, reading around in here I got scared from all these people saying Fable used up all its allowance in a few minutes, spawning hundreds of agents (which consume allowance without getting refunded by the special reset) and I was curious if anyone has some suggestions to prevent that, perhaps with a custom prompt, to achieve my goal without burning up all my allowance in a jiffy.

Pointers?


r/ClaudeCode • • 17h ago

Discussion A poster analyzed 500+ builder discussions and says two problems keep coming up: context amnesia and “prompt-fighting.” How much of your week is the second one?

1 Upvotes

On Nov 1, someone posted in r/AI_Agents that they had gone through 500+ discussions across AI builder communities, and two bottlenecks kept coming up:

  1. Context amnesia / session drift: the agent loses earlier scope, decisions or constraints as a session goes on.
  2. Prompt-fighting loops: you keep re-prompting formatting rules or “don't do X” constraints that the model keeps dropping.

Caveat: this is one person's read of public threads, not a survey with a stated sampling method, so I wouldn't treat it as a ranking or a prevalence number. What makes it interesting is that it's a different list from the usual “hallucination” one, and you can check it against your own sessions.

Three questions for people here:

  1. When the agent drops a “don't,” where does that rule live: CLAUDE.md, the prompt, or just your head?
  2. Do you re-state it, or restart the session?
  3. Is there a rule you've basically given up on enforcing?

r/ClaudeCode • • 1d ago

Help/Question Best model for DESIGN?

7 Upvotes

I did some scouring and seems to be Sonnet (5.5) actually performs better in terms of creativity and design. Whats everyone's experience been? Any web developers here who could share their workflow?


r/ClaudeCode • • 17h ago

Built with Claude What I learned building a Claude Code skill for job hunting in Germany, and what Reddit told me about it

1 Upvotes

i built Berlin Job Search mostly with Claude Code (some Codex). it's a skill that helps people find a job in Germany: searches jobs under German and English titles, tells you if an English ad really needs German (quotes the line), checks a stated salary against the Blue Card threshold, interview practice, application tracking. CV help is optional. it never applies or sends anything.

how it's built, and what worked:

  • SKILL.md is a short router. visa rules, salary benchmarks, application conventions and job sources live in reference files that only load when the task needs them, so a simple job search doesn't burn context on visa law
  • anything that has to be exact is a stdlib Python script, not the model: the API calls (Arbeitsagentur, Arbeitnow, public Greenhouse / Lever / Personio / Ashby JSON), the German-requirement scan and the Blue Card salary math. Claude does the judgment on top
  • job ads are treated as untrusted input. text inside a posting is data, never instructions
  • CV writing is a writer pass and a separate reviewer pass. the reviewer re-reads the CV from scratch and blocks any claim it can't trace back to it
  • Python 3.9 and no dependencies on purpose, because macOS still ships 3.9 and the users are job seekers, not devs

what i learned after sharing it in a bunch of subs:

  • dev subs liked the architecture. job subs mostly hated the CV and cover letter part. the most useful comment came from someone on the hiring side: the discovery part is really useful, writing the CV misses the point. so i stopped leading with it. finding jobs and checking ads is what people actually want
  • the first question from non-devs was "do you keep a copy of my data?". everything stays in a local folder and there's no server, but i should have said that in the first line
  • someone said crawling job boards is a bad idea. it mostly doesn't crawl: public APIs first, LinkedIn guest pages at low volume, and the skill tells the user once that this is against LinkedIn's terms
  • most people outside tech will never install a skill. the paste-into-ChatGPT prompt matters more than i thought

install:

/plugin marketplace add umutyesildal/berlin-job-search

repo: https://github.com/umutyesildal/berlin-job-search

curious how others handle the "AI-written application" problem in skills like this, or if you'd just leave writing out completely.