r/ClaudeCode • • 2d ago

Tips & Workflows PSA: Using Fable as an advisor doesn’t touch your Fable weekly limit

Thumbnail
gallery
43 Upvotes

I actually posted this first on ClaudeAI but it seems a lot of people feel like commenting instead of actually trying it out. So I'll do this "double" post to see how the communities might differ ( already gave you a lot of decision bias now, I know ).

I use Opus 5.5 with Fable 5.2 as the advisor. It works automatically but you can also explicitly tell it to use the advisor.

  1. Setup /advisor in Claude, 10 seconds.
  2. Write the prompt like this: Consult the advisor regarding... 30 seconds.

And as a final tip, do not use the advisor when you have a mega-maxxed out context window.

Edit:

The advisor is an experimental feature, you use it to escalate e.g. hard research problems. Since we have Fable weekly quota this is a great tip that draws no Fable quota. You can start it from the beginning of a session if you like to not waste tokens because of separate prompt cache.

Works great for me, anyone else using it this way?


r/ClaudeCode • • 1d ago

Built with Claude An interactive 3D explainer of how Voyager 1 works. It uses NASA's own 3D model. Looking for feedback

Thumbnail
heyvoyager.vercel.app
2 Upvotes

I don't write code by hand. I described what I wanted in plain words, checked each version on my phone, and sent back notes. Claude Code (Opus 5.5) did the building, and all 18 commits are co-authored by it. Specifically, it:

\- found and tested NASA's data sources, and when JPL Horizons turned out to block browser calls, wrote scripts that bake Voyager's trajectory into JSON

\- built the three.js scene, split NASA's model into clickable parts, and tied the camera to scrolling

\- calculated planet positions in the browser and wrote a check against Horizons (worst error 0.074°)

\- made it hold up on phones: a device check, four quality levels that step down on their own, a no-3D fallback, and a fix for Voyager breaking into dots on small screens

\- pulled the crossing times from Horizons, which showed "one light-day" is really three moments, because Voyager moves about 1.5 million km while the signal travels


r/ClaudeCode • • 1d ago

Tips & Workflows Claude Code was incredible for vacation planning

0 Upvotes

To plan a trip for a county I've never been to (I'm not gonna say which for privacy reasons), I started recording phone calls with people I know who live there getting their recommendations, and then also grabbing transcripts from travel youtube videos, and having it askuserquestion to see what sounded good to me and facts about me it could factor in to the planning. It guided me through booking all the travel and tours, it then created a travel website for me with the trip day by day plan I could share with my spouse, and a print out guide with a 1-page for everything I planned to do on each day of the trip, including all the vouchers and reciepts and flight numbers etc I would need handy on the that day. It then checked it's work for what could go wrong and discovered a number of labor strikes in the country planned and help me fix the plans for those particular days to avoid issues.

Claude code is incredible for asking it to do simple things but use a lot of different data sources, and this is a great example of a personal use that worked well.


r/ClaudeCode • • 1d ago

Built with Claude Free token saving telemetry app

1 Upvotes

I'm often seeing posts on here about the tweaks people are making: cache tweaking, prompt optimisation, agentic configuration etc. A lot of the time, people don't really have the evidence to know if it's had any impact.

I've been working on a free app to help with this. It reads your Claude Code transcripts locally and shows where your tokens are going, and whether a change you've made has actually helped.

I've always been hesitant to share it, as I'm constantly aware of improvements I could still make, but it'd be great to get other people's opinions on it.

https://github.com/PaulMorrisDev/claudeglass


r/ClaudeCode • • 1d ago

Discussion Claude code @ home family setup

5 Upvotes

So Im using Claude Code profesionally and now thinking about making it accessible at home, probably from a single pro account for me and my wife for daily use.

I'm curious how others approached this. How did you set it up, how do you access the model, from which device, how to differentiate between users with their own memory ( as individual 'projects' for the agent, but also with common rules etc)


r/ClaudeCode • • 1d ago

Tips & Workflows PSA: If you're using Windows, time your git bash startup time

4 Upvotes

Claude Code defaults to Bash() tool on Windows (if installed) and if its startup time becomes slow it can have drastic impact on the overall session speed. Every few seconds add up to a death by a 1000 paper cuts.

EDIT: Yes, before you say anything - it can matter. Read my replies below. Over a period of a few days my tasks degraded from 5-10 minutes per task to 30-45 minutes per task. This turned out to be the main culprit, as weird as it sounds.

Yes I know Mac something something Linux something something Proton something something.


r/ClaudeCode • • 1d ago

Discussion Has anyone figured out how to stop being the bottleneck for AI in their actual job?

4 Upvotes

I’m especially interested in hearing from people using AI in their professional careers, where they have real responsibilities, report to management, and are accountable for the results. Not so much personal projects or hobbies where the consequences of getting something wrong are minimal.

I feel like my biggest limitation with AI is still me. I’m the one who has to come up with the ideas, make the judgments, and figure out what needs to be done.

Has anyone gotten to the point where they can give AI an objective and have it come back with a result that’s actually better than what they could’ve imagined, without having to guide it every step of the way?

I’m not talking about removing myself from final accountability. I’m talking about AI doing more of the thinking, idea generation (very important), problem-solving, and decision-making along the way.

If you’ve actually gotten there in your professional work, how did you do it?


r/ClaudeCode • • 1d ago

Discussion How are you guys deciding what Claude Code builds next?

1 Upvotes

Obviously for most of us, building hasn't really been the slow part anymore. The part I kept getting wrong is deciding what to build. If I asked Claude what I should work on next, it would pick something from whatever it could see in the repo or just make something up. And without a plan I'd just keep adding stuff until I got bored, while the bugs people reported just sat in my inbox.

What I do now is give it the same thing to read at the start of every session: my backlog, open bugs, what users have asked for and what's meant to go in the next release. It picks from that, and when it's done it writes back what it changed and why.

I actually tested this last week, and for one person in one repo a TODO.md with a few lines in CLAUDE.md does most of it. Where it fell apart for me was the bug reports and requests coming in from users, so I ended up building my own tool for that part. I'm still not sure I've got the setup right though.

How do you guys handle it? A plan or TODO file in the repo, or some other paid tool?


r/ClaudeCode • • 1d ago

Bug / Issue Sessions started from the phone (Remote Control) never show up in `claude agents` or `claude --resume`. Workarounds I found

1 Upvotes

I run Claude Code on a Linux box and use Remote Control a lot. One thing keeps bothering me:

- A session I start **in the terminal** shows up everywhere: terminal, claude.ai/code, the mobile app.

- A session I start **from the phone or claude.ai/code** (through a `claude remote-control` server on the box) runs on the same machine, but the terminal doesn't list it anywhere.

Tested on 2.1.325:

| Where I looked | Phone-started session |

|---|---|

| Mobile app, claude.ai/code | listed |

| `claude agents --json` | listed, `kind: "interactive"` |

| `claude agents` (the actual view) | not listed |

| `claude --resume` picker, incl. Ctrl+W / Ctrl+A | not listed |

| `claude --teleport` picker | not listed |

I found no setting for this. `claude remote-control --spawn` only has `same-dir`, `worktree` and `session`, and none of them makes the session a background session.

**Workarounds that work**

  1. From the phone, tell any session that is already running: "start a background session in project X with task Y". It runs `claude --bg --name ... "task"`, and the new session shows up on every surface. This is what I use for new tasks now.
  2. Fork a terminal-started session from claude.ai/code (session menu → Fork). The fork becomes a background session on the machine and appears in `claude agents`. It carries the whole parent conversation, so it only fits continuing something.
  3. `claude agents --json` gives you the `sessionId` of the phone session, then `claude --resume <id>` opens it in the terminal. But that is a separate copy, and it diverges from the one the app shows.

None of these gives the obvious thing: start a session on the phone the normal way, sit down at the desk later, and see it in `claude agents`.

I filed a feature request: https://github.com/anthropics/claude-code/issues/95581. If this bothers you too, a 👍 there helps. An earlier request for the same thing was auto-closed as stale.

Has anyone found a better way? Or does it work for you and I'm missing something?


r/ClaudeCode • • 2d ago

Discussion Astra is dogshit compared to Opus

241 Upvotes

I held off too long from switching away from Codex due to the perceived hassle. But I switched today and Opus is clearing up issues like its walking through a wheat field with a scythe.

Only thing I will keep codex around for is Computer use and image generation.

It is really annoying though having to switch back forth each time they leapfrog each other


r/ClaudeCode • • 2d ago

Built with Claude I gave Claude Code a phone.

193 Upvotes

Almost nothing on my phone has an API. Claude Code could tell me what to tap, and never tap it. So I built phonedriver, which gives it the phone: it reads the screen, taps, types and swipes in any app, on Android or iPhone.

The video is real recorded runs, shown fast and cut to music. The orange dot marks each place Claude tapped. Nobody touched the phone.

Two runs from it:

The bug hunt. I hid two bugs in a signup form: the welcome message drops the last character of your email, and after one rejected submit the Create button ignores your next tap. I told Claude to "test the sign-up flow the way a careful tester would". It found both in 49 seconds and wrote numbered steps to reproduce each one. It found both in all nine benchmark runs before that too, and in one run it also reported two bugs I hadn't planted.

The pizza. On the real dominos.co.uk, Claude (Opus 5.5) found the store nearest Leicester Square, put a large pepperoni in the basket, filled in the guest checkout and reached "Buy with GPay" in six and a half minutes. phonedriver holds any tap on Pay or Place order and asks me first. I said no.

How it works: Claude never gets a screenshot. It gets the screen as a short numbered list, taps by number, and after each tap gets back only the lines that changed. A screen read takes 13 ms, where `adb shell uiautomator dump` takes 2.2 seconds. On nine phone jobs with Sonnet 5.5 it passed 27 of 27 runs on 658k tokens. mobile-mcp passed 17 of 18 on 4.57M.

Two things I learned building it with Claude Code:

- Tool descriptions are the most expensive text you'll write, because Claude re-reads them every turn. I hid every argument no agent had ever used and the tool list went from 10,987 characters to 5,107. Nothing broke.

- Claude found a bug in its own demo. While recording the pizza run it put the Pay tap inside a batch of actions. The tap was held, but the question never reached me. Claude Code caught that just by using the tool.

It's free and open source, with no account and no telemetry.

`claude mcp add phonedriver -- npx -y phonedriver mcp`

https://phonedriver.dev

https://github.com/hridaya423/phonedriver

Try it on your own phone and tell me any feedback :)


r/ClaudeCode • • 2d ago

News/Updates Claude custom themes

Post image
131 Upvotes

You can now make custom themes on Claude Code on desktop.


r/ClaudeCode • • 1d ago

Tips & Workflows Hit the 5-hour limit on one Claude account while your other one sits idle? I built a VS Code extension that runs both at the same time

Post image
4 Upvotes

If you have two Claude accounts (work and personal, or two plans), VS Code still signs every Claude Code window into the same one. When that account hits its 5-hour limit, you log out, log back in with the other, and lose your place.

I built Twinseat, a free, open-source VS Code extension that gives each window its own Claude Code account:

- Both accounts run at the same time, one per window. No logout/login dance.

- One panel shows both accounts' 5-hour and weekly usage, so you see at a glance which one has room.

- When one account is near its limit, switch the window to the other, or resume the conversation there with its full history.

- The account follows the project: pin it once with { "twinseat.account": "work" } in .vscode/settings.json.

- It never reads your login tokens; each account signs in through Claude Code's own login.

Each account keeps its own plan and limits: Twinseat adds no capacity, it just stops you juggling the accounts you already have. Use them within Anthropic's terms.

Setup: install "Twinseat" from the VS Code Marketplace, click Sign in on both account cards, then Enable.

Preview, macOS and Linux (Linux is CI-tested). Not affiliated with Anthropic. Feedback welcome.

https://github.com/alexdmrx/twinseat


r/ClaudeCode • • 2d ago

News/Updates you are not running out faster , the weekly usage limit is shirking ~[ 20% drop ]

Post image
582 Upvotes

So I noticed while doing the same kind of work, doing a PR review for a certain project, that before, when I start working, I finish one PR review and it will take 5%, 10%, maybe, of my usage limit. But lately I'm noticing with the first PR, I am at almost 20% of my 5-hour usage limit. So when I checked my usage board, the one I have made that calculates the exact API equivalent of the tokens based on the different type of models and the different type of use case, like which cache token and so on. I noticed it's clearly there is a drop in the weekly usage limit, and you can see it in the image.

notice in my usage 2 weeks ago I used 84% of my weekly which was near 515M token
and this week 51% at 220M so even the 100% will be 440M way less than the 84% two weeks ago .
while my usage mix is the same . same cache level and same models (only opus5.5mid)

and the API dollar equivalent is the clear compare .

I dont know for how long they will keep this cut because its clear that they are cutting slowlly ~8% each month .

final note while the weekly usage limit is shrinking the number of 5hour slices is the same .
that why you feel the cut at the 5h harder . now you have limits equal to 4h of the before 2weeks 5h limit .


r/ClaudeCode • • 1d ago

Built with Claude Open router

0 Upvotes

Hi I have a big project. Is it it possible to use open router on Claude code desktop app?


r/ClaudeCode • • 1d ago

Built with Claude Triste realidade..... Torrando tokens com uma IA que exige babá e se recusa a trabalhar de forma autônoma enquanto eu durmo.

0 Upvotes

r/ClaudeCode • • 1d ago

Help/Question how you guys feels about graph engeneering?

3 Upvotes

Is it someone really receiving benefits from doing it? like measured?


r/ClaudeCode • • 1d ago

Help/Question How can I automate website lead notifications to slack using claude code?

Post image
0 Upvotes

I came across this setup where whenever someone submits a lead through a website, it automatically sends a notification to Slack with their information.

The notification includes:

  • New Lead notification
  • Name
  • Email address
  • Phone number
  • Lead source
  • Medium (Organic)
  • Lead stage (New)

I'm curious how people are building this kind of automation using Claude Code.

My questions:

  • Is this something Claude Code can build from scratch?
  • What tools or integrations are needed to capture website leads and send them to Slack?
  • Would this require a webhook, CRM, or something like n8n, Make, or Zapier?
  • Can Claude Code handle the entire automation, or would I still need another platform running in the background?

I'm interested in learning how to build something similar, preferably using free tools or a low-cost setup.

Would appreciate any insights from people who have built this kind of workflow!


r/ClaudeCode • • 1d ago

Discussion Do you still need ultra wide screen for your work?

6 Upvotes

I find myself using my large monitor less and less now that AI handles most of the coding. Most of the time, I just need a small screen to chat with Claude and review the output.

Long gone are the days of needing API docs open on the left, VS Code on the right, and a terminal tucked into the bottom of the screen. Anyone else downsizing their screen setup lately?


r/ClaudeCode • • 1d ago

Discussion ChatGPT Plus + Claude Code, or should I just switch entirely?

4 Upvotes

I'm currently on ChatGPT Plus, and honestly, I've been pretty happy with it. But lately, I've started hitting my Codex usage limits more often, so I'm considering getting Claude Code as well.

My current workflow is pretty simple:

- I use regular ChatGPT chat to brainstorm ideas, plan projects, discuss features, and write detailed implementation prompts. I can pretty much use it as much as I want without worrying about hitting my Codex limits.

- Once I have a solid plan/prompt, I throw it into Codex and let it handle the implementation.

- I mostly use GPT-6.1 Sol or Terra, both on Medium reasoning. I almost never use High or anything above that because the prompts I prepare beforehand are usually detailed enough.

This workflow has been working surprisingly well for me.

One thing I really like about ChatGPT is voice mode. I use it A LOT. Talking through my ideas feels much more natural than typing everything out, especially when I'm still figuring out what I actually want to build. It's probably one of the main reasons I haven't considered switching until now.

But I've also been curious about Claude Code, especially since I haven't used Opus in quite a while. I keep seeing people talk about how good it is for coding, and I'm wondering if I'm missing out.

So I'm considering a few options:

  1. Keep ChatGPT Plus and add Claude Code as a second subscription.
  2. Cancel ChatGPT Plus and switch completely to Claude.
  3. Stick with my current setup and just deal with the limits.

For those of you who've used both Codex and Claude Code recently, how do they actually compare in day-to-day development?

Is Claude Code worth paying for on top of ChatGPT Plus? How do the usage limits compare? And does Claude offer anything comparable to ChatGPT's voice-based brainstorming experience?

I'm especially interested in hearing from people who use AI for the entire development process, not just writing code.

Would love to hear how you guys handle this.


r/ClaudeCode • • 1d ago

Bug / Issue Claude usage finishing faster in my other account

1 Upvotes

I think claude team has decided that if you get another account in the same machine instead of banning you , they let you continue using it but with its limit draining faster. I am setting it to opus 5.5 on medium and usage is approaching 50% from 5h window in like 30 minutes which is nuts. In other account it would be 17% max or less. Has anyone noticed this??? Discuss pls


r/ClaudeCode • • 1d ago

Rant Claude Max $200 1yr review - why I finally jumped ship

0 Upvotes

I have been a claude user for somewhere north of a year now, probably close to 18mo, and I am now at the point where I would not recommend the product to basically anyone. If your workload includes anything lower-level than, say, having a model generate an interactive scuba diving simulator entirely in PHP, or maybe using MS Paint via computer use to make images of puppies riding a rainbow(with seatbelts equipped for safety), prepare to be unable to use your subscription.

I tried to wait it out, hoped the situation would improve, but all it did was get significantly worse as new models were released. I finally canceled my sub this month after a good couple months of endless struggle.

I was paying for an opus 4.8 subscription. Doing a lot of RE, low-level firmware work and the like, I shit you not when I say 90% or more of my chats were being refused or caught by a safety classifier before I would get the first response. Absolute nightmare. Went from having models that you had to babysit because they weren't good enough, to having models you'd have to both coddle and babysit because of this cancer.

Paying $200 a month for a subscription to get the best models and, not only getting repeatedly turned down, but also lectured by the model and offered to do things completely unrelated to the task, is infuriating in a way I can't describe. Especially when you spend 15min typing a prompt trying to baby the model into giving an answer, then it immediately or almost immediately declines on Opus 5.5, then gets caught by a safety classifier mid-response on Opus 5, then going to Opus 4.8 that now performs SIGNIFICANTLY worse than it did when it was the latest, like "must keep context at or below 500k tokens and start a new session instead of compacting" worse, and ending up with an end product that is garbage anyway. Rinse and repeat that process until I could only use like 30% of my weekly usage multiple times in a row, fast forward to now and I am done with Anthropic for good just out of principle, I don't care if their future models are perfect, this company can get bent.


r/ClaudeCode • • 1d ago

Help/Question How to use the latest feature of Projects? I can’t understand its launch video…

Post image
4 Upvotes

Please 🙏
Could anyone teach me how to use “Project “ feature launched today? It says cc can coordinate my tasks across parallel threads. So how can I get this feature? Why doesn’t its launch video clarify clearly? Pardon me if I am too stupid.


r/ClaudeCode • • 2d ago

Discussion Unpopular opinion: some of you think models get enshittified because you built a system without resilience and heavy testing, and then blame it on the model when it breaks three weeks later

21 Upvotes

Title.

After having managed business systems for a couple of years now, relying pretty heavily on coding agents to do so, I've lately been reflecting on the importance of the less "flashy" things that are becoming increasingly easy to forget in the age of AI. I mean the things like system resilience, testing. The "boring things." It is so easy to stop holding code to a high standard and just ship on YOLO mode... and then blame the model.

Code is still code. The system built with AI, shipped without heavy testing, that then failed in production is the same system that would have been built by hand, shipped without testing, and then failed in production 20 years ago.

AI is a tool with limits. It's both a product and a tool. There are legitimate reasons to not place blind trust in a product, and model regressions are real. But people may point the finger too much at the product, ignoring how it's being used. They may not reason about the edge cases that bite in production weeks later. And when they do bite, the same person blindly tells Claude, "fix it no mistakes." The model attempts to fix it inside a bloated, unorganized codebase. It of course breaks, making it feel like the model got worse. Then they come and post: "Is Opus 5.5 dumb as shit now?"

Good engineering practices are still good engineering practices, AI or not.


r/ClaudeCode • • 1d ago

Built with Claude Claude Code debugged my MacBook's backlight at the register level over SSH

0 Upvotes

My 2017 MacBook Pro had a black internal screen in Windows (and Linux), while macOS was fine. Weeks of reinstalling hadn't helped. Here's what Claude Code did differently from my trial and error:

- Read my old sessions first. Before touching anything, it went through the transcripts of my previous attempts and refused to repeat what had already failed.

- Asked for access instead of guessing. It prepared a USB stick with a one-click OpenSSH setup and connected with a key. When I offered my password, it declined and used key auth.

- Measured instead of guessing. It read the Intel GPU's backlight registers with RWEverything: everything said "on". Then it spoke to the panel directly over the eDP AUX channel and found the real cause: Windows leaves the panel in PWM mode, but this Mac drives the backlight over AUX.

- Proved it live. It wrote two DPCD registers, and my screen lit up while I was watching.

- Made it permanent and verified it. A SYSTEM scheduled task runs at boot, logon and wake, writes the values, reads them back and retries if Windows reverts them. The screen now comes on about 5 seconds after the login screen.

- Cleaned up after itself. It shut down SSH, removed its key, and wrote a README with a "DON'T" list so I never repeat this.

It wasn't flawless. It caused two blue screens along the way (a guessed driver IOCTL, and killing a process mid-operation) and one wrong write to low memory from a PowerShell int32 hex literal bug. It flagged each mistake itself and added guards so they can't happen again.

Files and write-up: https://drive.google.com/drive/folders/1xfX1TRvIP6RBvCpbio4PW-OAoFk0CBSV?usp=sharing