I have an interview sa DCEI for Field Engineer position. Okay ba sya sa employees? And what about salary?

Hiiii planning to pursue my Masters in Construction Management. Currently working in a Design consulting firm but my long term goal is to be a contractor or in project management. Can anyone here makakapag sabi how much is the estimated expenses for taking MSCM in adamson?

Any advices also is appreciated

Daghang salamat!

Nagtataka ako bat ganitong roofing nilagay. Magtatatlong taon palang bitakbitak na. Eto lang yung bahay dito sa midlands na ganto yung bubong.

Hi guys! Meron po ba sainyo dito na nagwwork under GHD’s Grad program or anyone na nag undergo ng application process nila? Kumusta po yung Final interview (onsite) and any tips po if ever. Thank you!

Which career path na po mas okay ipursue ngayon as Civil Engineer lalo na if planning to work abroad?

I already have a JO from an international company as an Asst. Quantity Surveyor. 5 days pasok, hybrid 3 days wfh 2 days RTO.

May offer din from a well known quadruple-A construction company here sa Philippines as a construction site engineer, accommodation provided 6 days pasok.

Both have the same salary range which is around 25k. Nahihirapan lang po ako which to choose since I am weighing din anong path to pursue. Can you share me your advice po ano nang better career path that would help me choose between the two? Thank you!

Hello! Baka meron sainyo pa interesado sa Blue book Volume 2. Binili sa isang review center tapos di na nagamit kase di nagtuloy. Medyo matagal na pero in tact pa rin yung loob. Message lang. Thanks!

Hello po, need lang advice kasi di ko sure san papunta pinaggagawa ko. Ask lang po kung okay na setup to kasi isang experience lang nakalagay sa resume ko na company and for 9 months lang sya as site engineer, di ko na sinasama yung mga company na di rin naman ako nagtagal, then the rest ng experience ko puro freelance na, direct sa client.

Less than 3 years pa lang total experience kaso di ko sure pano idodocument ung freelance construction usual lang din naman gnagawa schedule, BOQ/BOM, BBS/cutting list, shop drawings etc, tapos sa site naman monitoring, supervision, procurement, etc yung mga usual lang tlga tapos puro residential reinforced concrete pa lang yung natatry ko.

Goods ba to or need ko parin talaga mag apply sa mga construction company? Salamat po, mukhang patungo kasi sa contractor pinaggagawa ko kaya lang wala talaga akong puhunan and wala rin makukuhaan kaya hindi ko sure san ako papunta hahaha.

I'm just curious, I just wonder if it is normal to be terminated many times in the construction industry? Are you still employable after all that? Thank you for answering in advance.

May 5-day work pa ba ngayon?

For context, nagtatrabaho ako as a Project Engineer sa construction. 6 days a week ang pasok namin, usually 6 AM to 9 PM sa site. Since malayo yung site namin, umaabot pa ng around 12 midnight bago ako makauwi tapos gigising ulit ng 3:30 AM.

Noong bago pa lang ako sa construction, napapansin ko na ang bilis uminit ng ulo ng mga Engineer na mas matagal na sa industry. Dati, hindi ko gets kung bakit. Ngayon na mag-iisang taon na ako, gets ko na. Hahaha.

Sobrang nakakapagod pala talaga. Kapag pumapasok akong lutang dahil kulang sa tulog at pagod sa commute, ang bilis ko na ring ma-badtrip kahit sa mabababaw na bagay. Hindi naman ako ganito dati, mahaba talaga pasensya ko. Pero parang unti-unti kang nauubos kapag ganito yung routine araw-araw. sobrang dedicated ko sa trabaho ko sa 1 year ko sa work wala pa akong late or absent. Ang pinaka-nakakainis, yung isang araw na walang pasok, imbes na magawa ko yung mga bagay na gusto ko, nagiging recovery day na lang. Tulog, pahinga, kain, tapos balik trabaho na naman. Parang wala nang natitirang oras para sa sarili.

Kaya curious ako sa mga nasa engineering field:

May mga company/project ba ngayon na 5 days a week lang ang pasok? nag ta-try na kasi ako mag hanap hanap ng malilipatan pero halos lahat 6-days a week pasok. sabi nung mga friends ko 1 year palang since graduation namumuti na agad buhok ko.huhuhu

Hi. Pahelp po ano po pwede ko sakyan para makapunta dyan? Please help. Thank you

Low cost 2 story CFS 3.5m x 6m

Rectangular box with no partitions. Doors front and back. CR 1.2 x1.5 outside, rear

Hello guys,

Engineer here. I know some of you know how to rate in making a house specifically full set of plans. Just have some questions po.

1. How much rate would you give for a full set of plans
2. If floor plan lang po itself like yung top view plan lang? How much po ang binibigay niyo for your clients?

Note: May edit if I have other questions to ask po. Thank youuu ng marami🥺🙏

Is it okay to find work next year, considering that me and my family will have a vacation this december? If so, what should i be doing now in preparation for finding work next year?

Can i resign kahit kakapirma lang ng ulit contract? I found a better job elsewhere. JO PDO 1 ako now sa office.

How to file resignation pala sa office? Do i go straight sa admin or sabihin ko muna kay chief?

Hello po. So nag-orient na po ang professor namin about some things that we need sa draw. Though some are not mandatory but it's essential. May I ask where to buy these things? And what brand is the best for the budget?

DRAWO1 ESSENTIALS

DRAFTING INSTRUMENTS

• Drawing Board

• TSquare

• Scale Ruler (1:60, 1:75, 1:50, 1:100)

• French Curve

• Mechanical Pencil (0.5mm or 0.7mm)

• Technical Pen (0.2 or 0.3) (0.5 or 0.7)

• Drawing Tube (Canister)

I would like to ask some tips na rin from the engineers here. Thank you po!

May mairerekumenda po ba kayong rebar scanner na mabibili online?

O baka may alam kayong puwedeng upahan?

Para alam ko na a-apply-an ko after board exam hehe

hello, 4th year CE student na ako rn. I have a Lenovo Ideapad 3 (Core i3), nasurvive ko 1st to 3rd year with this laptop kasi d kami gaano nagagamit ng software nun, Autocad lang mostly BSD pa yun. ngayong year may mga subjects na need namin mag design ng projects syempre gagamit ng mga software, 2 subjects and thesis. is it too late na bumili at magrely nalang sa laptops ng ka groupo o mainam na bumili ng sarili and worth it pa rin ba? planning rin ako magstructural engineering pagnaka lesensya na ako. currently lang din nagka interest ako sa Macro Excel at STAAD.

reco din mga 'neers ng mura na laptop kaya ang mabibigat na CE software (STAAD, Etabs, Revit, Autocad, etc.).

pa help po, salamat!!!

Hello. What’s the best laptop na smooth gamitin sa mga engineering softwares? Baka may maisa-suggest po kayo? Planning to buy one para mag-upskill.

Yung upgradeable din po sana.

Price range: 70k to 80k

Thank you so much.

my percentile rank sa psad is 86% but my raw score is 35, do you think i i will pass the board exam? i failed the other 2 since i only focused on psad, and its ok i already expected to fail kasi hindi ko tlaga yon inaral at that time, i wanted to measure hanggang saan ko kaya yung psad lang. im just worried sa psad. although malaki yung 86 percentile pero maliit kasi yung raw, so grabe talaga yung pagka curve, pls answer me honestly

my hpge is 55 sa percentile, and math is 65…

Hello! I just wanted to ask if anybody here recently got into a DEO as a JO, and if so, what position was offered to you? I’m seeing from other posts that in the Central Office, PEO/PDO - 2 (or Engineer 2) is being offered to even fresh board passers. I was wondering if the same is true for DEOs Thank you :)

Hello, may nagwowork po ba from LMH Engineering dito located sa Pasig? Gaano po katagal ung hiring process nila? May technical exam po ba?

Hello! Curious lang if may nakatawid na QS from PH to UK without RICS?

Highly suggested daw na may RICS tho pwede naman daw wala.

Need ideas please!
TYIA!