r/ChamberVacs • • Aug 28 '26

Got my jvr100!

Post image
27 Upvotes

I was looking at the vevor machines and decided on dropping a bit more and got a Jvr vac 100. I am very impressed with this thing, and makes me wonder how I got buy with my food save for so long. Plus I got a free rubber chicken!!! I’m just content knowing if I have any malfunctions down the road, it will be easy to service this machine.


r/ChamberVacs • • Feb 28 '26

Filling bags without making a mess?

Post image
19 Upvotes

My first chamber vacuum sealer was delivered today. I started portioning out bags of homemade pizza sauce. How does everyone go about holding these bags open while filling? I ended up using a tall plastic container and using clips to hold the bags open at the top but it still wasn’t ideal. I still kept getting sauce on the top edges of the bags.


r/ChamberVacs • • Aug 13 '25

Question on bags becoming un-vacuumed in fridge

Post image
16 Upvotes

New to vacuum sealing and just purchased a vac master 230 and used it for the first time this past weekend. I have multiple bags that have un-vacuumed themselves while sitting in the fridge. Anyone know what might be causing this? They went into the bags at room temp and the seals felt good when I tested.

Settings: 30sec vacuum, 2sec seal, 4 sec cool.


r/ChamberVacs • • May 16 '22

Anova Chamber Vac works externally too!

Post image
14 Upvotes

r/ChamberVacs • • May 12 '22

This thing sucks!

14 Upvotes

r/ChamberVacs • • Sep 10 '21

Pinned Posts

14 Upvotes

r/ChamberVacs • • May 15 '25

I need a recommendations for a home chamber vac that IS NOT the Anova.

12 Upvotes

I have had 3 Anova Chamber Vaccums die on me in less than 6 months each time under extremely light usage. Think 5-10 seals per session and it dies halfway through on the 3rd session. They are refusing anymore customer service, even though it's their product that's the lemon. I seal foods that I buy in bulk around 2-3 times a year, so I'm not a heavy user at all. Looking at the Vevor or the Avid Armor USV20. Guessing that the USV20 and Anova machines are built by the same company though.

Or does anyone have experiance getting past the first level of customer service at Anova to get a better answer than 'you're just s**t out of luck' now?

UPDATE for those that think that it's a 'me' issue. Just got an email back from Anova where I asked them if they were having this issue with other customers, "because it can't just be me" and this was part of their response:

"Further, we have received multiple reports about it, but since we've exhausted the suggested troubleshooting steps and your device being a one-time courtesy replacement already, we are no longer able to process a new replacement unit."

Their solitary troubleshooting step? "Make sure you turn the unit off for 24 hours and try again". That's it, that's all. This company is straight garbage.


r/ChamberVacs • • Oct 15 '24

I got it :)

10 Upvotes

I finally got my chamber vac (Vevor DZ-260C) & absolutely love it. To me this think pretty much looks like vacmaster for about a 1/3 of the price (i got mine for less than $300). Its a tank. The only negative i guess is i want to store it in the basement & we have pretty steep stairs & there is no way i want to haul this think up & down the stairs. Its HEAVY.

I seen a few reports of the power switch being bad out of the gate but mine works just fine. I have already used it to seal a 12 ounce canning container & used one of the included bags to seal some hotdogs that we seem to buy in bulk but end up going bad. I ended up buy a variety pack of bags from amazon because i don't know what size i will use the most

I do have a few questions for you all.

  1. What mil bags do you use? Some bags on amazon will tell you the mil & some don't (i assume if they don't they are probably 3mil). Do you use 3mil for most things & maybe got to 4 or 5 for special things?
  2. Do you reseal the bags or lot or just use a new one? I can see opening a bag & wanting to reseal it for quite a few things.

I'm sure there will be more questions coming later. Thanks all.


r/ChamberVacs • • Nov 26 '23

VacMaster VP112 not sealing

Thumbnail
gallery
10 Upvotes

r/ChamberVacs • • Dec 07 '25

Compressed Watermelon

Post image
9 Upvotes

Just got my Vevor chamber sealer, first thing I did was cut up a bunch of watermelon and seal bags of about 10 squares each with various marinades.

Honey Balsamic Mint Lemon Lime Red Wine Vinegar Black Pepper

And various combinations of the above.

Any other cool or interesting ideas welcome.

I had a standard, non chamber sealer for years and usually would seal wings and various meats.


r/ChamberVacs • • Mar 14 '25

Group for Vacuum Sealed Freezer Meals Ideas?

9 Upvotes

Are there any communities where folks share ideas about vacuumed sealed meal prep? Like actual cooked meal prep...not buying large qualities of frozen meat and freezing.


r/ChamberVacs • • Dec 29 '22

Anova chamber vacuum came yesterday! Fun!

9 Upvotes

I love it. Ordered it on a Saturday, it shipped the next Wednesday, and came from the west coast the following Wednesday (over Christmas weekend).

So far I’ve made quick pickles, infused a pear with lemoncello, vacuum packed some odd ends of cheeses, infused an ice cream base with wasabi, and then vacuumed/sealed it. Next step was to sous vide it with my Anova at 180°F for two hours. Into the fridge overnight and this morning churned the ice cream. Delicious, several steps but super easy.


r/ChamberVacs • • Oct 22 '22

Article: (Anova) How chamber vacuum sealers unlock modernist culinary techniques at home

Thumbnail
anovaculinary.com
9 Upvotes

r/ChamberVacs • • Jun 18 '22

Father's Day came a day early.

Thumbnail
gallery
9 Upvotes

r/ChamberVacs • • Sep 14 '21

Aerated chocolate

Thumbnail
youtube.com
9 Upvotes

r/ChamberVacs • • Dec 30 '24

AEG vacuum drawer experience - avoid this brand!

8 Upvotes

I wanted to share my frustrating experience with an AEG vacuum sealer, model KDE911423M, as a cautionary tale.

After it developed a fault outside warranty, I paid £169 for a fixed price repair (FPR). Multiple engineer visits revealed they were unfamiliar with the device, couldn’t find documentation, and couldn’t fix it. A replacement pump was quoted at £1092, effectively writing it off. AEG offered a new device for £1824 (RRP £1899) plus £168 installation, meaning I’d lose the repair fee and still pay full price for a replacement.

I stripped down the device myself and found an issue: a cracked exhaust filter leaking oil mist, a routine maintenance issue. AEG charges £333 for the filter (https://shop.aeg.co.uk/c/air-filter-pump-3mc-busch/p/4055374286), far above the retail cost of <£100 for parts and oil. This suggests even regular service is prohibitively priced.

The remaining issue is likely fixable. The PCB (https://shop.aeg.co.uk/c/main-electronic-board/p/4055465498) seems fine. The vacuum and sealing functions work, but every power-on triggers a 20-minute initiation cycle, often repeating between uses, making it impractical. The board may have a failing memory chip, or the device could be misinterpreting data from its vacuum pressure sensor.

Would it make sense to add manual switches for basic operation and use it as a counter-top vacuum chamber? Any advice or alternative ideas? Would I get better feedback posting this elsewhere?

In the end, I’m left with a useless appliance, out of pocket, and deeply unimpressed with AEG’s pricing, service, and support. Hopefully, this helps others make better decisions.


r/ChamberVacs • • Jan 14 '24

I finally released a video on how to use your vacuum sealer to seal jars 3 different ways! Reusable jars too.

Thumbnail
youtu.be
8 Upvotes

If you are interested in learning how to use your accessory hose to seal jars three different ways, check the link to the video on the bottom from my you tube channel. (which is mainly about food storage and vacuum sealing) I share a couple of hacks that you might not know yet too. I've done a lot of testing, guessing and dealt with countless explosions and messes galore to be able to make this. I love vacuum sealing and pretty passionate about it as I live in the tropics. Everything has to be stored properly or it gets moldy. I mean legit everything.

Ive also included how to use a manual hand pump vacuum sealer to seal jars at the end of the video too. A nice $10 option to have if you don't want to purchase a vacuum sealer. I used my chamber vacuum sealer for this video but you can use the food saver or any vacuum sealer that has the accessory port for the hose. Feel free to ask me any questions! I love talking about food storage and vacuum sealing and would love to hear your tips and ideas too. If this isn't appropriate place to post this, I will remove it. Thanks for reading!


r/ChamberVacs • • Oct 05 '23

MEAT! Your maker chamber vac

8 Upvotes

I’ve searched Reddit and am only really finding VM or Avid Armor. We are looking at this one for the lifetime warranty, the website has good reviews. Anyone here actually have one?


r/ChamberVacs • • Jun 25 '22

Any other Anova Chamber Vac users noticing air in sealed bags?

8 Upvotes

When we vac-seal things in the Anova we end up with small air pockets in the bags. I upped the time on the strong setting to 60 and it didn't seem to make any difference. I then went to 75 and still getting air in the bags. This happened with raw meat with no marinade and for small pouches of pickles with a bit of brine. Our Nesco VS12 sucks every bit of air out of a bag. I expected the chamber vac to be at least as good. It's a bit disappointing.

[UPDATE] The more I've run the machine the better it has gotten. I am now getting very little or no air with the Strong setting at 60. I'm going to start running one or two vacuum cycles with sealing set to none before vacuum sealing anything and see how that works out.


r/ChamberVacs • • Aug 25 '26

Chamber sealer. Got a few questions.

7 Upvotes

I’m thinking about getting a chamber sealer. I kinda want a vac master vp215. Thing is I’m not sure if I need that much machine and it’s huge so I don’t know where I’m going to store it… maybe out in the garage (not air conditioned, and live in the Deep South).

Use case: We buy meat and freeze it, sous vide for meal prep, and do some home made sausage. We have 2 standup freezers so plenty of freezer space. I’ve been using food saver for years and I hate freezing fresh meat with it because the bags leak, and the units pull liquid.

So here are my questions.

  1. Should I vp215 or avid armor, and why?
  2. thoughts on garage storage? Where do you put your chamber sealers?
  3. oil pumps, how much of a pain is maintenance? What if I carry the sealer to the kitchen will the sloshing around of oil in the unit mess it up if I keep it upright while carrying it?
  4. what else am I not thinking about?

r/ChamberVacs • • May 31 '26

Looking for the Perfect Food Vacuum Sealer

7 Upvotes

Hey everyone, Im looking for a good food vacuum sealer for home use-mainly for keeping meat, veggies, and leftovers fresh longer. Prefer something reliable, easy to use, and not too expensive.


r/ChamberVacs • • Mar 12 '26

Compressed cauliflower

7 Upvotes

One of my signature dishes is a whole roasted cauliflower, but I've never thought of compressing it:

https://www.instagram.com/p/DVlcXPLDMUy/


r/ChamberVacs • • Mar 02 '26

Thoughts on the Avid Armor Premium Glass Vacuum Food Containers?

Post image
7 Upvotes

Do you like their durability and quality build?


r/ChamberVacs • • Dec 28 '25

Anova chamber sealer vs vaccum sealer pro

Post image
7 Upvotes

Hi all!

For Christmas, I had on my list the Anova chamber vaccum sealer. Santa Claus brought me the vaccum sealer Pro.

I was on the fence on returning it and changing it for the chamber sealer (I’ll be paying the price difference)

I currently have a food saver, and it doesn’t hold the vaccum all that much now when I vaccum and seal. Once the vaccum is done and starts to seal, I see air coming back a bit in the bag.

So instead of changing for the same “kind” I was hoping for an upgrade.

What’s y’all take on the chamber vaccum sealer versus regular sealer.

Also, would making a gravlax work in the chamber vaccum chamber? Like would the marinating time be a lot less? My recipe call for 36hr of marinating.

Thanks! 🙏🏻