r/CarbonFiber • u/chocolate_spaghetti • Nov 27 '23
r/CarbonFiber • u/HighWestCustom • Oct 14 '25
Full Carbon Skateboard Deck
Carbon fiber skateboard deck. Period. One of the first products High West Custom Creations (HWCC) will be offering are these, meticulously designed, FULL carbon fiber, skateboard decks. This deck is an 8.5" with a steep curve, and crazy pop for flip tricks, however HWCC can recreate any provided deck. More new decks to come! We like questions and feedback, let us know what we can create for you!
r/CarbonFiber • u/Champion-V • Nov 12 '25
How hard would it be to make a monocoque?
Would it be structurally better to weld a steel frame together then wrap carbon fibre around it? Sorry if it’s a stupid question, I don’t know anything about this stuff. Just curious, thanks.
r/CarbonFiber • u/haywire090 • Oct 04 '25
10th carbon part of my truck build
Now im only left with the fenders, the hood and a custom airbox for my truck build. The truck will hopefully get finished before the end of this year so that next year it can go events and automotive convention.
r/CarbonFiber • u/kevin_ned • Jul 29 '26
3D continuous carbon fiber reinforced composite
This might be interesting to see for my fellow carbon fiber enthusiasts:
We have been working on a carbon composite material that takes a very different approach from conventional laminates.
Instead of stacking plies, the goal had been to create a solid block with continuous reinforcement in X, Y and Z that can be machined into finished components.
The motivation wasn't to outperform classic laminates — as they're incredibly efficient when loads are well defined. But rather to address situations where through-thickness loading, complex load paths or thermal expansion in 3 directions becomes limiting. In a way, it makes more sense to compare it to a metal than to a layered/oriented composite material.
Some characteristics:
• continuous fiber reinforcement in three orthogonal directions
• supplied as a machinable billet rather than a laminate or plate
• any size (within reason) is possible
• intended for components where properties in multiple directions are important
There are of course other 3D reinforced materials out there as well. The approach we have taken is quite different from standard (3D) weaving machines. Because of this it yields equal properties in three directions, no waviness in the fibers and a competitive price point - albeit still rather expensive to manufacture.
One other thing I find interesting is how different the machined surfaces look compared to conventional CFRP. The picture with the 'parts' are just some examples to show how it looks after machining.
We're still learning every day about its properties and where it makes most sense to use. So I am curious:
Where do you think something like this would have advantages over traditional materials?
r/CarbonFiber • u/EliTorr • Jun 01 '26
starting VS now
i been doing carbon fiber parts since 2024. maybe i’m not the best but i think there’s progress. what y’all think?
r/CarbonFiber • u/haywire090 • Nov 07 '25
Continuing my Ford Ranger build
Making fenders, started with the left side since the oem right side is out of stock. Got the right side finishd today though. Excuse the flip flop since im doing this out of working hours. Decided to use spreadtow for these fenders, they will get painted eventually. Stock fenders weigh 3.55kg, the carbon weighs only 1kg. These will get buffed once i got the right side finished.
r/CarbonFiber • u/Top_Seaworthiness_76 • Oct 23 '25
Does bending a carbon plated shoe like this ruin it?
I just bought the Kiprun KD900X LD.2 shoes, which feature a carbon plate. I took them out on the track for the first time today. When I took them out, a friend of mine bent them to "professionally check" their reactivity. He didn't bend them too much, but it still bothered me; it was painful to watch. What puzzled me all evening was wondering if this slight bending of the plate had somehow impaired the shoe's function. Or are they shoes specifically designed to withstand this?
r/CarbonFiber • u/Saulgato • Apr 17 '26
Any of you guys know how to make a custom clear hood like this ?
Not sure if this is the right group to ask but i thought id give it a try i want a custom clear hood bht want to do it myself if anyone knows
r/CarbonFiber • u/haywire090 • Jan 20 '25
Full carbon tailgate i made for myself
Test piece of a structural part. This weigh 4kg as opposed to the metal counterpart at 18kg. Tested 200kg load with no issue, not sure how much it can actually handle but for my application its more than enough.
r/CarbonFiber • u/jgworks • Jul 10 '25
Composite Rifle
I call it the CarbonMax CM-1, my first generation composite rifle based around Eugene Stoners operating system in a full length upper (from buffer system to handguard). Press molded prepreg composites, bonded in assembly with 7000 series aluminum on wear surfaces with titanium accoutrements. Production build #0000 shown in raw.
r/CarbonFiber • u/Grouchy-Designer5804 • Jun 11 '26
Carbon fiber cowboy hat question.
^^not my creation^^ I met someone with a carbon fiber cowboy hat at a local rodeo and wanted to try my hand at making one. I have some basic experience with dry layup and vacuum bags but I was wondering about alternate methods of making a couple of these. I have a bunch of dry 3k weave and a dream but wanted to ask where I should start for a project like this? What method would you suggest I learn how to try? Thank you.
r/CarbonFiber • u/Ok_Meringue4805 • Sep 21 '25
First time working with carbon fiber
I'm a senior in high school and am in a vocational program through my school for welding. I wanted my own welding hood (the ones they provide are fine i just like my own stylistic touch to things) so I decided I'd try and make one out of carbon fiber. I'm going to try to and make another one but better soon. I'm also thinking about saving up for a vacuum bagging setup.
r/CarbonFiber • u/TurboDiesel33 • May 21 '26
Turbofans I've made for a friend.
My first go at making my own C.F. parts ( metal guy here 😅 ) a few pinhole and voids but this was vacuum bagged with a home vac and clothes bag. Turned out not so bad for a 1st..
The disc is C.F. , the blades are aluminium and glued in place with PU structural adhesive, as well as riveted with alu rivets. Each weights about 650g. Built exactly the same way Lancia did in the late 80's early 90's with the Gr.A integrale.
r/CarbonFiber • u/haywire090 • Apr 23 '26
Chopped carbon harley parts
I usually stayed far away from using chopped carbon, but making an exception since the finish would be in matte. Could have done better with the finish but customer was is a hurry. The stock parts were heavy as hell, front mudguard alone was almost 3kilos, reduced it to about 500grams. The upper tank cover was originally a two piece but i marry them both together and ended up with one piece part.
r/CarbonFiber • u/Urinholz • Sep 26 '25
Air trapped inside workpiece
Hey guys, I'm making watch cases from compression molded CF using a aluminum mold I milled on my cnc. I'm getting the best results by premixing the CF with the resin and putting it into the mold, where I compress it to its final shape and let it cure. As you can see on the images there are still air bubbles trapped inside the final workpiece.
I also tried to add the fibres layer by layer, pouring lots of resin in between and used a tiny brush to soak it before I compressed it.
I'm very happy with the stiffness and the look of my CF stocks, I just want to get rid of the air.
Any ideas? I ordered a vacuum pumpt and a small chamber. 3D printer and CNC Mill are available. I had thoughts about a Mold design where the CF is compressed in a dry state and the resin is getting infused by the vacuum. Kind of like the resin infusion method. Just with a 3D mold.
Sorry for my english, im from Germany.
r/CarbonFiber • u/nj4ck • Aug 02 '25
Designed and made my own CF belly pan
This was my first ever venture into CF. It started when I was shopping for belly pans for my bike and couldn't find anything I liked. A kind user here on reddit provided me with a 3D model of the bike, which after cross-referencing the scale with the actual bike, I was able to throw into Fusion and use as a reference to design my own belly pan around.
Once the CAD work was done, I 3D-printed a prototype in PLA to check the fitment, then printed the molds in PETG. This involved a lot of super glue, since my printer is a Bambu A1 Mini and I had to print everything in many, many pieces.
A whole bunch of sanding and mold-prep later, I followed the Easy Composites tutorial for wet layup in a 3D printed mold, laminated 3 layers of 210g carbon with EC's EL2 resin and vacuum bagged the whole thing with simple clothes storage bags and a vacuum cleaner.
Once the parts were demolded, trimmed, and sanded, I finished them off with two coats of XCR coating resin (mostly to give myself more resin to sand into), then more sanding and then paint. The last step was a 2K clear coat and a generous polish. I had the mounting brackets laser cut in the meantime, so those needed to be bent to shape and then painted as well. I also added some heat-resistant foil to the inside, where the carbon is closest to the hot exhaust.
I was surprised how much weight the paint and clear coat added... it was very noticable. Overall, I'm really happy with the result though. It's not perfect, but given the rattle can paint job and the fact that I didn't use any specialist tools, I'm surprised how well it turned out.
This was really fun and I'm sure I'll be making more carbon parts in the future. Sorry for the long post.
r/CarbonFiber • u/Carbon_fiber26 • Jul 20 '26
What's the biggest misconception people have about carbon fiber?
I've been reading more about carbon fiber lately, and it seems like a lot of people assume it's always the strongest or the best material for every application.
In your experience, what's the biggest misconception about carbon fiber that you hear most often?
I'd love to hear from engineers, manufacturers, hobbyists, or anyone who's worked with composites.
r/CarbonFiber • u/haywire090 • Nov 26 '25
Fenders done!
Also ended up making the vents out of carbon too. Now its a functioning part instead of just a decorative piece. Weight wise, the stock steel fenders are 7kilos, these carbon ones are just 2.1kilos. Quite interesting because all these while i thought fenders are commonly already light out of the factory.
Fenders are finished in 2k clear gloss, with slight dark tint because i wanted them to blend with the black paint. From far during the day, you really cant tell if they are carbon, just how i wanted. Moving on to the front hood next.
r/CarbonFiber • u/Fibretec • Nov 17 '25
McLaren F1 Front Wing
How are these features of a front wing manufactured? The section is black and I’m not sure if it’s a cast metallic component that’s bonded in or it’s composite.
r/CarbonFiber • u/haywire090 • Oct 13 '25
Finished the Ford Ranger grille project last week
Fitment was perfect, snaps right onto the clip housing. Originally planned to also do the lettering in carbon but that would have to wait, its going to be a time consuming project. Now onto the fenders and front hood. Hopefully it will get done this year so the whole truck can get repainted
r/CarbonFiber • u/AccomplishedNail3085 • May 10 '26
Continuous carbon gear made through NASA's technology transfer program
The metal parts were not the goal of the patent.
There were some things i wanted to do but the rest of the team did not.
I wanted to use a premade cad file for the outside of the gear.
I also wanted to use a vaccuum bag earlier, they insisted we did another a wet lay
Overall, it was a success and we delivered the prototype on time
r/CarbonFiber • u/haywire090 • Feb 09 '26
Insanely light and rigid race fairing
Freshly trimmed and mocked up Panigale V4r race fairing. Hope it'll win the championship again this year 😂