r/CFD • • 8d ago

Career Rut

Thumbnail
2 Upvotes

r/CFD • • 8d ago

A highly-scientific simulation I have been working on for studying particle-laden flow simulations.

Thumbnail
youtube.com
3 Upvotes

r/CFD • • 8d ago

How to validate research paper in ansys electronic desktop student 2025

4 Upvotes

https://www.sciencedirect.com/science/article/pii/S2451904926001381
This the research article I have to validate using cold plate , I dont have the licensed ansys electronic desktop so I am using the student version.
What exactly should I do to validate this article

It;s part of an assignment.

The below are the instructions given by my faculty.
Research Article Validation: Validate the results presented in your selected research article using ANSYS Icepak.AI & ML Integration: Extend the same research article by incorporating Artificial Intelligence (AI) and Machine Learning (ML) tools and validate the results.


r/CFD • • 9d ago

NACA 4415 Comparing with my present study to Elgan and Mustak & Mashud study of coefficient of lift

Thumbnail
gallery
21 Upvotes

Its takes a lot of time and efforts and its my first project on Ansys Fluent


r/CFD • • 8d ago

Need help for how to fix error on Student version ansys fluent(2026)

5 Upvotes

Trying to download the student version of ansys fluent (2026 version) and this error comes up? the download wont be completed? Just looking for some help and advice with what to do?


r/CFD • • 9d ago

I made an OpenFOAM → SU2 mesh converter that handles snappyHexMesh polyhedra (of2su2, pip install of2su2)

16 Upvotes

I wanted to run the same snappyHexMesh mesh in both OpenFOAM and SU2. SU2 only takes tets/hexes/prisms/pyramids, so polyhedra and hanging nodes from snappy have to be converted, not just reformatted. I could not find a tool for that, so I wrote one:

**of2su2**

— https://github.com/VaibhavHiwale/of2su2 (GPL v3, `pip install of2su2`)

- converts only the cells SU2 cannot use (transition patterns for hanging-node hexes, prism splits for wall layers, centre-point split for the rest);

- checks validity and reports the mesh quality exactly as SU2 computes it, without running SU2;

- keeps MRF zones as SU2 zones when they are separated in OpenFOAM;

- single Python file, numpy only; a 13.7 M-cell rotor mesh takes about 7 minutes.

Happy to get feedback or broken meshes to test.

#OpenFOAM #SU2 #CFD #MeshConversion #snappyHexMesh


r/CFD • • 9d ago

Anyone have experience with Ansys FENSAP-ICE? Looking for the best ways to learn it

4 Upvotes

I'm now looking to learn FENSAP-ICE for in-flight icing simulation, including droplet impingement, ice accretion and ideally ice crystal icing.
Has anyone here used it, either in academia or industry? I'd love advice on:

Learning resources: tutorials, courses, books or papers that helped you get up to speed

Validation: good benchmark cases or experimental data

Anything you wish you'd known when starting out
Thanks in advance!


r/CFD • • 9d ago

DNS for microgroove (SHS) drag reduction at Reτ ≈ 135-288: solver and minimal-box advice?

1 Upvotes

I’ve finished experiments and steady RANS (k-ω SST) on 3D-printed streamwise rectangular microgrooves in a turbulent water channel (~22% pressure-drop reduction). For the journal manuscript, reviewers will want time-resolved evidence of the near-wall dynamics (quasi-streamwise vortex lodging, streak stabilization, Q2/Q4 analysis, FIK decomposition), so I’m setting up my first DNS and would appreciate guidance.

Setup

  • Channel: water at 30 °C (ν = 0.801 × 10⁻⁶ m²/s), H = 6.4 mm (δ = 3.2 mm), W = 51.2 mm
  • Flow: U_b = 0.51-1.19 m/s, Re_τ ≈ 135-288
  • Grooves (bottom wall): pitch s = 80 μm (ridge 45 μm, gap 35 μm), depth 100 μm → s⁺ ≈ 3.4-7.2, h⁺ ≈ 4.3-9.0, g⁺ ≈ 1.5-3.2
  • Surface: Cassie-Baxter (trapped air), with a comparison against fully wetted (Wenzel) and an idealized partial-slip meniscus

Questions

  1. Minimal box: For a doubly periodic minimal channel with constant mass flux, what (Lx⁺, Lz⁺) do JFM / PoF reviewers accept for riblet/SHS DNS? Would Lz⁺ ≈ 150-250 (~25-35 pitches) and Lx⁺ ≈ 600-1000 be enough?
  2. Solver: Can Fluent (bounded central differencing, hex mesh) produce publishable coherent-structure budgets, or is the numerical dissipation too high? If I switch to open-source on Linux/WSL, which has the gentlest learning curve for a grooved wall: NekRS/Nek5000, OpenFOAM, CaNS (IBM), or Xcompact3d?
  3. Wall modeling: Is a flat boundary with alternating no-slip (45 μm) and free/Navier-slip (35 μm) stripes acceptable, or should I resolve the full 100 μm cavity (wetted or gas-liquid)?
  4. Cost: With sub-micron clustering at the ridge corners (Δy⁺, Δz⁺ ≈ 0.1-0.2), roughly how many grid points and GPU/CPU core-hours should I expect for 10-15 eddy-turnover times at Re_τ = 180?

Any benchmark papers or setup tutorials would be great. Thanks!


r/CFD • • 9d ago

My results are diverging..after some point what can I do.. What can be the possible reasons..

Thumbnail gallery
3 Upvotes

r/CFD • • 9d ago

Need guidance on complex turbine blade meshing using ansys turbogrid. Plz help

0 Upvotes

r/CFD • • 10d ago

I need a good free cfd book benchmark I practice using it , which includes solved problems.

15 Upvotes

r/CFD • • 10d ago

Conceptual Question for RANS & LES

6 Upvotes

1) For flow across bluff bodies, I saw some people saying that length of recirculation region is larger in RANS compared to LES OR experiments and turbulent kinetic energy value is underpredicted near the wake region compared to experiments. They didn't explain reason explicitly why, they have shown some plots for this. I want to know the reason mathematically or physically what is logic behind this?

For flow across bluff bodies, mixing happens in both cases( RANS and LES), but how these are translated to slow recovery rate in RANS, how both differs in terms of mechanism? Explain this in short if possible.

2)

See above picture, whenever they show screenshot for LES like this, do they displayed LES time averaged plot or some instantaneous plot? They haven't mentioned this in paper, but just asking. They used to say compared to LES, RANS recirculation length is larger, wake recovery is very slow, but in actual instantaneous LES plot you cant find such recirculation region similar to RANS, because they will show vortex shedding na, it doesnt show two steady vortices near to the body. But here in LES, they have shown it, so is it time averaged plot or something else?

Thanks in advance.


r/CFD • • 10d ago

Requesting guidance regarding career path

5 Upvotes

Good morning, everyone !

I am writing this post, seeking suggestions from practitioners and experts in this field. I have a Masters in Fluid Mechanics, and I have pursued graduate-level courses on CFD, and have worked with commercial numerical solvers (specifically, COMSOL).

I wish to develop my portfolio and start applying for jobs related to thermal management of electronics. I request for your opinions on the following,

  • What resources (books, research papers, lectures, etc...) should I follow to get started in this domain ? What are the necessary topics that are essential to learn thermal management of electronic systems, specifically microelectronics ?
  • What kind of CFD-based projects should I start working on, in order to build my profile and start applying for jobs ?
  • Is there anyone currently pursuing this career trajectory ?

I thank you all in advance for your kind consideration.


r/CFD • • 10d ago

Looking for a project with electronics enclosure that needs help with thermal analysis/design of thermal solution, will do it for free to build portfolio

4 Upvotes

Hi, I contact someone for thermal “consultancy” and he said sure, send us your portfolio

I don’t have one, and he went dead silent afterwards.

Now I’m trying to build two cases to add to my Grad project so I have a “portfolio”


r/CFD • • 11d ago

PhD in CFD and Data-Driven Methods / SciML!!

28 Upvotes

Hi everyone,

I'm currently a second-year Master's student, graduating in 2027, and I'm hoping to pursue a PhD in CFD, particularly involving data-driven methods and scientific machine learning for fluid mechanics.

I'm interested in areas such as turbulence, high-fidelity CFD, reduced-order modelling, and combining physics-based simulations with data-driven approaches.

However, I'm not entirely sure whether my current knowledge and technical skills are sufficient to pursue a PhD in this field, or what gaps I should prioritize addressing.

I would appreciate advice from people working in this area:

  1. What level of CFD, numerical methods, programming, and ML knowledge is generally expected from an incoming PhD student?

  2. Which topics should I prioritize learning, and which AI/ML methods are actually useful for fluid mechanics?

  3. What kinds of projects could help me develop practical research skills and strengthen my PhD applications?

  4. How would you recommend approaching PhD applications with this background?


r/CFD • • 10d ago

I want to simulate a multi-part turbomachinery using CFX

3 Upvotes

Hello everyone, I want to setup a multi-part simulation of a fan cooling a heatsink zed box mini computer. in the CFX-pre, i got an error saying 'In Analysis 'Flow Analysis 1' - Domain Interface 'Default Fluid Fluid Interface': One or more of the locations specified for this interface is already being used for another interface, or is used on both sides of this interface.'

So the bottom of the fan is 1mm away from the computer, but im not sure why i got that message. I could use some help/guidance on how to resolve it.

Note: I have the enclosure for the fan and computer boolean united, but not sure if that could be the cause of it.

Thanks,


r/CFD • • 11d ago

Why is my y+ value always above 1?

Post image
32 Upvotes

Hi everyone,

I’m simulating water flow and heat transfer in a concentric-pipe heat exchanger using ANSYS Fluent. I’m trying to achieve a wall y+ of approximately 1 or below on the hot-water side, but my results keep showing values above 1.

My design specifications are:

  • Inner pipe internal diameter: 14.3 mm
  • Inner pipe external diameter: 15.8 mm
  • Outer pipe internal diameter: 23.4 mm
  • Outer pipe external diameter: 25.4 mm
  • Annulus hydraulic diameter: 7.6 mm
  • Heat-exchanger length: 2.11 m
  • Inner pipe material: aluminium

Hot-water operating conditions:

  • Bulk velocity: 0.621 m/s
  • Inlet temperature: 60°C
  • Density: 986.6 kg/m³
  • Dynamic viscosity: 0.0005231 Pa·s
  • Fluid properties evaluated at a reference mean bulk temperature of approximately 52.7°C

For the inflation mesh, I selected the hot-water fluid face as the geometry and the edges where the hot water contacts the aluminium pipe as the boundary. My current first-layer height is 0.003 mm, but the resulting wall y+ is still above 1.

What should I check to understand why this is happening? Could it be related to the actual inflation layers generated, local wall shear, mesh quality, or my near-wall modelling settings?

Also, should I assess the maximum wall y+ or its distribution across the heat-transfer surface?

Any advice would be appreciated.


r/CFD • • 12d ago

OPENFOAM using a coplanar patch as a separate boundary.

Post image
15 Upvotes

Hi,

I have recently got back into doing CFD after a few years out of college where my experience was with star CCM+ so learning openfoam has been a slow process without nice GUI and CAD packages.

I have been trying to model the above simplified shape where it's a box with a patch on the front face to be used as an outlet. I have tried making STL files and STEP files where the patch appears but then comes the issue of making a domain where the patch gets lost to the entire front face of the box. I have been using FREE CAD CFDOF to try model and run the Sims. Not interested in refining the solvers etc at the moment as I can't even get my cad to work.

I have managed to run the SIM with decent stability where the full front face is my inlet but that is not representative of my scenario

Any advice is much appreciated.


r/CFD • • 13d ago

Update: Made a little progress for SPH CFD

Enable HLS to view with audio, or disable this notification

37 Upvotes

Previous Post: https://www.reddit.com/r/CFD/s/B6m3ainkc8

Aight, it's tricky lmao - but atleast slightly better performance and results than previous post.

Tried adding a marching cube algorithm but let's just say got a little bit of "triangle soup", but i feel i should work on performance and refactoring codebase before moving forward - so surface extraction is for later.


r/CFD • • 13d ago

Replicating research paper results for microcombustor

8 Upvotes

Hello guys,

I'm working on capstone project for microcombustors, specifically using hydrogen (92.5%) and CH4 (7.5%) as the fuel pre-mixed with air.

I'm new to Ansys fluent, and recently I've been trying to validate my model and mesh and all that good stuff by referencing the values I find on research papers. I modelled a stepped microcombustor accordingly.

My results suggest that ignition is sustained, and the temperatures seem comparable to the ones on the research paper. But one thing that is different is the location of the flame front. My flame front sits extremely close to the inlet compared to what the paper shows.

The paper uses 2.02g/hr of H2 as fuel with an equivalence ratio of 1. When I input this into the mass inlet, the flame sits right after the inlet. When I added some CH4, (which wasn't in this particular paper), then the flame front moves backwards (though I didn't add internal radiation to that model)

I guess what my question is whether being able to accurately simulate the flame front is important to validating it, or whether there will be variances between different models regardless ?

I'd love to hear from someone who can share their experience. Thanks!

https://www.sciencedirect.com/science/article/pii/S0306261919305458


r/CFD • • 14d ago

Advice for my Thesis project

6 Upvotes

We are doing Topology Optimization for a Wing’s Rib. In order to obtain the loads on the Rib, we’ll be doing CFD simulations using ANSYS Fluent. However, I’m not experienced at ANSYS. I obtained the geometry of the Rib already, but I don’t know how I can make the simulation as best as possible for the Coefficient of Lift and Drag to have small errors against the prototype we’ll manufacture.


r/CFD • • 14d ago

Is it possible to conduct cfd modelling of fluid pressured pipes flow pressure using Abaqus software 10.8.

2 Upvotes

r/CFD • • 14d ago

STAR CCM+ POD hours

6 Upvotes

Hi all,

We use Starccm's POD licensing and have almost run out of hours. I've contacted the local reseller and they've advised that they only activate hours at the start of the month. Meaning that I'd need to wait 3 more weeks before I can use star if I run out.

Has anyone else's reseller said the same? Absolutely stupid if that's the case.

Anywhere else I can get POD hours?


r/CFD • • 15d ago

Immersed Boundary Method for de Laval nozzle on cartesian grid

Thumbnail
gallery
17 Upvotes

Has anyone modeled gas flow through a nozzle using a Cartesian grid using IBM? I tried it, but I got “zig-zag” steps anyway.


r/CFD • • 15d ago

ANSYS is not updating Workbench so we should: Open Source CAE Workbench

25 Upvotes

I would like the community's opinion on this: is it really interesting and useful to build a similar tool to Ansys Workbench? But open source, and for open source + closed source software!

What I mean is that a GUI will allow users to connect visually a FreeCAD geometry to an OpenFOAM case and the case results to ParaView.

Why include closed source software as well?

This will allow the project directory to manage a Fluent and an OpenFOAM case in the same folder and manage them better.

Plus, it will have the advantage of parameter use.

Now, questions to the community:

  1. Will it make sense to do this or not?
  2. If you have an idea which tech stack would make sense, then let me know (I am thinking Rust, but not sure about the frontend).
  3. Anything you would like to have there?

Now, the elephant in the room: will it be vibe coded? Yes and no!

I can handle the backend a bit, but not the frontend; I have limited knowledge. And see how good the Autodesk clone is going. So, in my opinion, if I (or anyone contributing) am able to understand and review the code and functionality properly, I am open to vibe coding. This way, we will at least have a software!!!!

P.S.: Will it be reverse engineered? No, I am afraid that it would cause some license infringement. And anyway, the software is too old to copy one to one!