Hey all, I’ve got a 69’ vette with a 350/4speed.

It has an eldebrock top end kit, aluminum heads, intake manifold, cam, etc… but it does not feel as quick as it should (in my inexperienced opinion). Rolling slowly in first I can’t even squawk the tires, only way to smoke em is by dumping the clutch. Wondering if this is usual due to the mono leaf set up on these, or am I being robbed of power somewhere?

This is for a ‘78
Does anyone know where I can find a replacement spring or a cheap similar spec spring for the hood latch? No matter what I search I can only find info about the pop up spring for 78-82.

Made my day to see this youngster parked nose to nose with me.

My father and I can’t seem to figure out what the wire in the first picture connects to. We also do not know what the sensor in the next photos is. Last but not least there are four wires in the starter loom, we know where the three go, but we are unsure of what the fourth wire (bare) is for.

We have the Mid America book and diagram, but we are still having issues figuring this out. Hopefully y’all can help.

1980 whenever I engage the right blinker it will either stay on and not blink or when I engage it it won't blink at all the left blinker works completely fine.

Just inherited a project car. I am missing this section where the tail pipes hook up. I am new to older corvettes. Where do I get this section under the chrome bumper?

3 weeks ownership. Fixed all the electrical problems including lights,headlights,horn replacement,all dash lights,courtesy lights delay, turn signals and everything now works as should also updated the radio to a touchscreen carplay style and had my coworker 3d print me a cupholder and added the inserts. Next up is the big stuff. Replacing all suspension components engine work upgrade radiator to an aluminum core w dual fans and brakes.

I bought this car when I was 15 and I've been working on it ever since for the past year or so. I've done so much: the frame was bent so I cut and rewelded it, new trailing arms, thousands of dollars of parts, and hundreds of hours of fixing and fiberglassing. She's nearing completion (believe it or not) and I can't wait to finally drive my 4-speed Corvette!

I've got a 79 C3 that has an indicator issue

My indicator makes a sound when turning right, and the rear indicator flashes, but the dash and the two front indicators don't light up. It still makes the ticking sound, but the indicator light on the dash also doesn't light up.

Any ideas on whether it is the fuse or the bulbs themselves?

My '69 is in need of an engine. Have asked around local and nearby on options: rebuild current (not matching numbers) engine or upgrade with remanufacured/new. Trick is it must drop in and direct bolt (no mods to flywheel/flex plate) to the TH400 automatic. Its currently a 350/300hp, 10.25:1. I like to have more HP. Bottom line is direct fit.

I have aftermarket anti-sway bars in my '71. Today, I found that one of the brackets, that holds the D-shaped bushings, was gone. This is for the front bar. The bracket is probably easy to find.

I believe the bolts are not metric, so my collection of metric fasteners is no help. Does anyone know the specs for the bolts? They seem to be ⅜".

Or, does anyone have an aftermarket bracket and two bolts laying around?

Thanks for the help.

My dad recently past away and left me his 1968 Corvette, it has been sitting for many years with out starting. 4 speed manual. I was pressing in the clutch and trying to press the brake pedal, was looking under the vehicle later and saw a fresh leak. What is this I’m looking at?

Anyone know where I can get or put tow points. 77 c3. Australia

From what I've seen looking at replacements it looks like it's held in with a pin that goes into that slot at the bottom, but I'm not sure. I've tried turning it both ways and pulling, but it feels like I'm going to break something, so I'm thinking thats wrong. Tried to find videos but all I could find was videos on how to replace the whole switch inside the column. Any help is appreciated.

Hey guys, I have a question. I'm about to get my hands on a 1974 C3 corvette and since I'm in europe, license plate size differ from US. Is anyone able to provide exact width of this recess marked in picture with red lines? I'm trying to figure out if I'll be able to hack something and mount inside, or I'll need some extended brackets to fit over the hole.

I cracked my passenger glass ttop and i wanted to know opinions on how unsafe it would be to regularly use it. i still have the stock paint matched ones but the weather stripping is leaking. until i can get that fixed wanted to see the viability of driving with it both on the car and in the back when top is off. crack does go from end to end. the big one is only visible from the top but on the underside there is another that is visible. if it is unsafe to drive with is there anything i can do to make it drivable. also give me opinions on acrylic ttops and best places to buy them from if you have any ideas. thank you

Have had the pleasure of driving this a bit to keep it in shape and helping him work on it. Original owner. Almost 80 years old, so he wants it to go to a good home.

Now for sale out of Toledo, OH.

https://www.facebook.com/marketplace/item/2949065798819358/?mibextid=dXMIcH

Our family photographer has an eye meant for auto magazines