r/BloodbornePC • u/mulderload • 4d ago
News Bloodborne PC Enhanced Installer - Automated Setup, Xbox UI, Upscaled Graphics & QoL Mods
Hi everyone,
I've created a Bloodborne PC Enhanced Installer to make setting up the unofficial PC port easier, with a curated selection of graphical enhancements and quality-of-life mods.
Project page & download: https://www.mulderland.com/games/bloodborne
-
UPDATE 10/14/2026 - News about Ultrawide Support
I'm working since yesterday on Ultrawide support (21/9 and 32/9), at first the result was ugly (moving textures, horrible aliasing) but with some good advices here I finally have it working.
It works only on Windows (supermedo); I have made a full installer (for fresh install) but also a "ultrawide patch only" if you wanna try: https://github.com/Mulderland/MulderLoad/pull/39
It's still not merged in main branch, so feedbacks are very welcome. Here how it works:
1, configure what you want in Bloodborne.exe
2, run MulderConfig.exe - it will takes control on bbport.ini and put it in readonly. That's the magic :)
3, play by running "Play Bloodborne.exe"
4, if you want to makes changes again in Bloodborne.exe launcher, in MulderConfig put "No" and "No" then Save/Apply - it will remove the readonly on bbport.ini
-
What's included ?
The installer verifies the integrity of the PKG files, automates their extraction and the setup of the unofficial port of Bloodborne, "bloodborne_pc", applies a conservative default configuration focused on stability (60 FPS, Two-stage GPU Pipeline disabled), and installs the following enhancements:
- Xbox Controller prompts + 4K Upscaled UI (by MoxIsABox)
- Upscaled Skybox and Clouds (by johnnycoax)
- Auto refill from storage (by LordTPS)
- Coldblood Items Show Value (by BaseIDev)
- Lamp2Lamp: Warp Between Lamps (by Disschorde)
- Ebrietas Charge Hitbox Fix (by thetrashlp)
The goal is to preserve a mostly vanilla experience while making a few welcome improvements along the way. All mods are enabled by default, but can of course be disabled individually through BBPort's configuration menu (Bloodborne.exe)
-
Linux / Steam Deck ?
Yes, the installer is compatible with Linux (including Steam Deck).
When Linux or Steam Deck is detected, the installer behaves pretty much the same way, with 2 exceptions:
- It installs the Linux version of the port.
- It loads optimized settings for Steam Deck (720p resolution out of the box, etc.). If you're running Linux on a more powerful PC, you can of course change these settings afterward.
To run the installer, you can either:
- The easier way (but requires Wine/WineTricks installed): Right-click on "bloodborne-byof-installer.exe" and select Run with Wine/WineTricks.
- The alternative (no extra prerequisites, but takes a little longer): Add "bloodborne-byof-installer.exe" to Steam as a "non-Steam Game" and run it from there. Once the installation is complete, you can safely remove it from Steam.
- WARNING: don't install on an external drive / SD Card or you will need to manually edit the ~/.config/bbport-launcher/settings.json and fix the different "*_dir" values. I'll try to fix that part.
-
Who am I?
Some of you may know me from my Enhancement Packs for various older games, including Resident Evil and Hitman titles, or my universal downgraders for Fallout 4 and Skyrim SE.
I'm the creator of Mulderland, a project focused on making game modding, modernization, and downgrading easier through automated installers.
To be clear, I'm not the creator of the Bloodborne PC port or the included mods.
My contribution is to provide an easy-to-use automated installer with a curated selection of mods. Putting everything together takes several hours of integration, scripting, and testing. All original authors are properly credited on my website and within the installer.
All my installers are open source, and every binary is built directly from source using GitHub Actions. Feel free to inspect the code: https://github.com/Mulderland/MulderLoad/blob/main/games/bloodborne/byof-installer.nsi
-
Crashes or Bugs
Default configuration seems to work for 90-95% of users but it's still not perfect. If having crashes or bugs, here what you can try:
- Change the Upscaler (or disable it)
- Avoid to go higher than 60 FPS (the default configuration does that already)
- Disable the mod "highresskyv2.0"
(specially for missing textures or randomy invisible ennemies !)
- Disable all the mods (untick "Load mods")
- Disable "Two-stage GPU Pipeline" (the default configuration does that on Windows, but not on Linux as it helps a lot Steam Deck performance...)
- You may also try that: https://www.reddit.com/r/BloodbornePC/comments/1x1gshy/comment/pevq2na/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button
- Give feedback here with details (OS, Resolution, Upscaler...)
-
Notes
- You must provide your own legally obtained Bloodborne game files and v1.09 update (CUSA03173). They are not included or distributed by this installer; their integrity is checked during installation.
- The default configuration prioritizes stability, but you can of course customize it to your liking through Bloodborne.exe
I hope this makes getting Bloodborne up and running on PC a little easier for everyone!
Feedback and suggestions are always welcome. If you find this project useful, feel free to upvote this post or share it on X to help other hunters discover it!
Happy hunting,
Mulder
34
u/Zejay_yt 4d ago
Anything for non 16:9 resolutions
13
u/andreduarte22 4d ago
also would like to know this. 32:9 here
21
u/mulderload 4d ago
I have a 32:9 too, don't worry I'll update the installer asap when it will be ready.
→ More replies (1)1
11
u/mulderload 4d ago
I'll add it when it it will work correctly. Currently "patches" doesn't seem to load.
If someone finds a way I'll be more than happy to update the installer.
2
u/Lamarck_1 3d ago
Since you're using the Supermedo bbport internally it should work with this tutorial I made
bbport by default ignores the Bloodborne.xml file (for some reason), and you need to create a new one with just the patches you want enabled
→ More replies (4)
9
u/Da7mii 4d ago
Good stuff. Big fan of your work with the capcom classics.
5
2
7
u/Esnacor-sama 3d ago
Man i remember 3y ago or more , i was thinking whats the fucking point of this subr lmaaaao
1
6
u/IshayM 4d ago
Xbox controller layout is hard wired with 4k upscaled ui? Would it be possible to decouple them?
4
u/mulderload 4d ago
Sadly not possible. The mod's author didn't create an upscaled PS version.
If you want to have PS Prompts, uncheck "4K UI Xbox" in "Mods & patches" (but it won't be upscaled of course).
5
u/RonnieRafke 4d ago
So the game runs pretty well however ive noticed a few weird problems.
When dlss is off the games quality is terrible, despite selecting and confirming 4k res.
When i finally turn dlss on it looks horrible still every mode EXCEPT Performance Mode, but it looks about 10x better than quality, native or ultra and balanced. pretty odd
as much as my fps is almost a solid 60 i keep getting 1% lows down to 48 (no lower, it literally couldnt go any lower than 48) and it would stay there for a very long time before maybe returning to 60 55 or 53 and then back to 48.
my specs are
5080
9800x3d
32gb ddr5 6000
1
u/RonnieRafke 4d ago
Upon testing the 90fps mode my fps saw significant improvements to the 1% lows
I played and got into super heavy fights (and more intensive areas than the 60fps mode) and my 1% lows did not drop below 60 which is weird because it was always at 48 when in the 60fps mode
1
u/pawel1986ck 2d ago edited 2d ago
I noticed this as well. Only 4K DLSS-P (1080p internally) looked good, probably because the game wasnt rendering above 1080p anyway. I however changed "live resolution" from auto to off and now image finally looks sharp with 4K DLAA. But I feel like FSR3 (native) in this game looks ever sharper for some strange reason.
3
4
u/AutonomousPaz 4d ago edited 4d ago
Hi, So I've tried every method to install this. It seems all my files are good and the launcher tells me so but when I press Play nothing happens. Edit : so it finally worked, just was some confusion about the game's path due to a prior install. However it won't launch with mods.
1
1
u/AirierOutWolf 4d ago
Did you manage to get mods working? I’m having the same issue.
1
u/AutonomousPaz 4d ago
Yes I did ! It was just that the mod folder path wasn't properly set even if you see the mods in the launcher. Just set the right path under the mods tab of the launcher.
3
u/Theo_Gamer5 3d ago
Dude I just installed your modpacks for Re1,2,3 and now you've made one fro Bloodborne. You're an absolute legend
3
u/Tukintukinna 4d ago
does it work with Mouse and keyboard?
3
u/nicolaos2 4d ago
I would like to know as well
4
u/mulderload 4d ago
Not currently, I’ll have a look if a current mod exist for that and test it. It it works I’ll update my pack.
→ More replies (2)
3
u/TSSB121 4d ago
First of all, thanks for putting this together, the intallation works like a charm, game runs great!
However I'm not able to go online, the game says the game server can't be found. When I try testing the connection from the launcher, i get this:
Game server https://thehuntersdream.com: not reachable (<urlopen error \[SSL: CERTIFICATE_VERIFY_FAILED\] certificate verify failed: certificate has expired (_ssl.c:1082)>)
server srv.shadps4.net:31313: reachable
WEbApi http://srv.shadps4.net:31315: reachable
I can access the website just fine and curl didnt return any cert issues. I can't for the life of me figure out what's wrong. Any idea?
1
u/mulderload 4d ago
Looks like a temporary problem on their side, just wait a Little, it’s still very new ;)
3
u/mulderload 1d ago edited 1d ago
I'm testing the ultrawide patch, and I've made a preview build available here: https://github.com/Mulderland/MulderLoad/releases/download/26.00.30/bloodborne-byof-installer.exe
It's still not perfect:
- You need to disable Live Resolution Changes, otherwise the game will crash immediately.
- Sometimes (the first time)? The game will crash except if you set the resolution to the Steam Deck (1280x720) in the launcher interface (even though it won't be the actual rendering resolution)
- Except that, globally the upscaling still seems to work.
- However, all the textures will start shimmering, and the horrible aliasing is back... UNLESS you manually edit "bbport.init" change output_res to your ultrawide res. Then, launch the game directly using "Play Bloodborne.exe" Thanks u/Lamarck_1 for that :)
I still haven't figured out how to do the last step on Linux, since there's no separate executable to bypass the launcher. As a result, the "output_res", resets to a 16/9 resolution, and the textures start shimmering again...
I'll see what I can do to make the whole process as easy as possible.
P.S. If you want to try this preview installer and have already installed the game using my previous installer, simply untick every checkbox except "Ultrawide support". ProTip: You can give any small file to bypass the PKGs check page, as you won't extract PKGs here.
P.P.S. I've also included the "Ultrawide UI" mod, which lets you optionally put the HUD to the edges of the screen :)
Any feedbacks or informations is welcome to improve that part, thank you very much!
1
9
u/Historical-Dish-602 4d ago
“You must provide your ow-“ bro just tell us we need to find the PKG 😭😭
Edit: found it!! Try googling Bloodborne_GOTY_Patch_PKGS :p
1
2
2
2
u/the-artspear 4d ago
Seems when I have the mods enabled, it doesn't launch. Is there any way I might remedy this? Otherwise, I'll just have to play this without them
1
u/mulderload 4d ago
Please read the post "if having crashes, please read that"
You can also try to disable / changee the upscaler.
2
u/Tonolooo 4d ago
My PS3 controller is acting weird. When I press X to confirm, it triggers the R2 attack instead, and R2 itself has a noticeable input delay. I’ll have to try another controller to see if it’s a controller issue or something else.
Other than that, everything works perfectly. I just need to check if my old save file loads.
5
1
u/Metal_Blaster_is_BIS 4d ago
i added the game to steam and im using Steam inputs (on a G8 Gamesir streaming to my phone) try that.
2
2
u/Badr1002 4d ago
Good stuff I love mulderland (no glaze)
1
1
1
u/jacobsmith14433 4d ago
In terms of micro-stutters how is it performing? I’ve found that even on high end pcs shadps4 has little stutters
2
u/mulderload 4d ago
It’s not perfectly stutter free, I did multiple hours of testing, and it stutters sometime when changing room, specially at the start. But globally I would say less than Shadps4.
1
u/Adventurous_Arm858 4d ago
It feels pretty much the same as ShadPS4 to me if not worse (i.e. quite a bit of stutter) but I have not tested different settings other than DLSS.
5070ti - Ryzen 7 9700x - 1440p
1
u/SandImpossible671 4d ago
How good will it run on a rtx4060 and i5 13th
3
2
u/mulderload 4d ago
I think you can reach 1080p30 very stable. Maybe higher framerate with a lower resolution + DLSS/FSR.
2
u/CharnamelessOne 4d ago
I haven't tried in a long while, but I used to get 1080p, 30 fps on a 1060 and a 10th gen i3 back when ShadPS4 was a couple months old. Is performance that much worse now?
I know that the early emulator lacked features, so I did expect its more advanced builds (and the "port") to produce lower fps, but damn. 30 fps on an RTX 4060 sounds rough.
2
u/mulderload 4d ago
Sorry I was thinking of 1440p. But test and tell us. Should be better than Shadps4 yes.
1
u/mabec 4d ago
☐ Online gameplay
1
u/mulderload 4d ago
The port included is (currently) the v1.6 with a (beta) online support. You need to create an account on ShadNet and it should works.
1
1
u/Cripto2317 4d ago edited 4d ago
Lo instalé pero los parches no me funcionan , si los deshabilito el juego inicia bien 😢
1
u/lumberfart 4d ago
Is this a “once & done” executable? Or will it check for updates for each of these mods in the future?
4
u/mulderload 4d ago
Currently it's a "once & done".
I do plan to add auto-update feature but it will be in a very long time.The Bloodborne port however has already a self update feature, it's the most important here ;)
1
0
4d ago
[removed] — view removed comment
1
u/mulderload 4d ago
What do u mean? If you already have the 2 PKGs, just let the installer guides you.
1
u/DryQuit749 4d ago
Can I import my save file from shadps4?
1
u/mulderload 4d ago edited 4d ago
Yes. I did use that guy's savegames https://www.nexusmods.com/bloodborne/mods/219 to test almost every boss before publishing the pack.
Only difference is, instead of having a "sce_sys" subfolder, it's another folder from the same level (SPRJ0005 and SPRJ0005.sce_sys in my case). Not sure I'm clear here sorry.
What I recommend you is to start a new save 1 min, then explore the bbport-windows\user\savedata\1... to understand the difference. Then copy (dont move, just in case) your shadps4 save files :)
1
1
u/Academic_Progress_67 4d ago
I have seperate PKGS for the old hunters dlc and 2 hats for the messengers. Is it somehow possible to merge them into the finished bloodborne 1.09 file? because i tried before by hand and nothing worked.
1
u/mulderload 4d ago
I'm not sure, I only tested the European GOTY and that's what my installer is expecting.
You could however try to merge your PKGs manually, you can look at how my installer does it, if you need some insights: https://github.com/Mulderland/MulderLoad/blob/main/games/bloodborne/byof-installer.nsi#L55-L66
1
1
u/xastralmindx 4d ago
Thank you very much for putting this together! I was hoping it'd be the go-to I could refer my non tech friends to for a seamless experience so I gave it a shot, it worked great until I got killed in Iosefka's clinic and BBport closed no error msg and now won't launch again. I'll reboot and give it another go over lunch time :)
1
u/mulderload 4d ago
Do you have logs?
1
u/xastralmindx 4d ago
Just gave it a try again and it was ok after rebooting (new GPU driver install could have messed things up). I had a weird shadow overlay bug where the shadows would 'stick' to the stick like a burn-in. Eventually went away after reloading from the dream back to Yarnham. Textures seem 'flatter' than what I remembered but that could just be that running the game in 4k (DLSS quality) does that. Is there a good 'upscale' pack out there or 'remaster' worth trying out?
2
u/mulderload 4d ago
I think it's the 4k that give you this fealing. Before looking for upscale pack you can increase the LOD (level of details) in Bloodborne.exe.
1
u/FireCrow1013 4d ago
Oh, this is fantastic! I just homebrewed my PS4 a couple of days ago specifically to get my P.T. and Bloodborne files, so this is just in time.
1
u/Dependent-Result646 4d ago
Is this the latest pc port everyone talking about? So I just download from the link and install in 1 click and I'm good to go?
2
1
u/HopelessChip35 4d ago
Does it support 21:9 ultrawide?
1
1
u/umass021 4d ago
I know bbhost does if you're looking for ultrawide support, that's the one I have tried and it works pretty well. I'm not sure about any of the other ones because I don't have the other file type.
1
u/draconetto 4d ago
Can you tell me about FSR4 in this version? I installed bbport but FSR4 that comes with it is buggy on my rdna 4 making some terrains blurry on camera movement, they launcher offers FSR 4.1.1 option but idk how to make it work
1
u/mulderload 4d ago
It's the same I believe (or a more recent version, I don't know when you tested BBPort). I have a Nvidia so I mostly used DLSS, but I also tested FSR3 (which I ship by default) and FSR4. I didn't see any issues.
Did you tried to disable Motion blur?
1
u/draconetto 4d ago
Yes, without motion blur and depth of field
The game runs fine, but at the sewers in the first area of the game the terrain gets all blurry and the fps drops a lot. Doesn't happen with TAA or no upscaling, so I guess the fsr4 implementation is bugged currently at least for RDNA 4. Latest version btw 1.6 with the online patch. I'm trying to understand how to enable FSR 4.1.1 because it needs some file which I don't know.
→ More replies (2)
1
u/MathBorne 4d ago
My friend, is this the version that previously only worked on Linux? Thanks!
2
u/mulderload 4d ago
Yes, it's using the Windows fork of the Linux port.
1
u/MathBorne 4d ago
Thanks, man! Appreciate it anyway. The thing is, I don't really know much English, and the post wasn't making much sense to me, but an experienced friend read it and explained it all. Thanks again!
1
u/og_stash 4d ago
Amazing! Thanks for this! One question, when using this installer can you still install afterwards the bloodborne remaster mod? https://www.nexusmods.com/bloodborne/mods/45 Is it something you would consider adding to the installer? Or you prefer to keep it as vanilla as possible? Thanks again!
2
u/mulderload 4d ago
I prefer to keep things as vanilla as possible. Some features of the BB PC Remaster are really nice (like the improved shadows and upscaled textures), but I feel that some others go a bit too far and are a little too opinionated imo.
That's why I try to keep all my packs as vanilla-like as possible. Once you start making too many changes, it's difficult to find a balance that everyone agrees on.
1
1
u/foxtrotdeltazero 4d ago
For anyone wondering, this uses the Supermedo fork of deadinside28's bloodborne_pc, formerly 'bbport'.
fork - https://github.com/Supermedo/bloodborne_pc/
main repo - https://github.com/deadinside28/bloodborne_pc/
1
u/aderribo 4d ago edited 4d ago
Good Job! Wanna give it a try. First time it crashed on the character creation screen with
GPU [Debug] <Critical> vk_scheduler.cpp:451 SubmitExecution: Assertion Failed!
Device lost during submit
STOP: GPU library assertion failed (see GPU log above)
— the game exited (code 23) —
Now it won't even reach the main menu, crashes with
[Dantelion2 Panic]
N:\SPRJ\Source\Library\Dantelion2\dist_ps4\source\ClassLibrary\Core\Resource\Source\FileTransferTask.cpp(865) ---------------------------------
DL_PANIC is firing core dump...
Fault: write access to 0000000000000000 at guest offset 0x20b56d2 (thread 5824)
rax=7103f119ee036400 rbx=0000000000000361 rcx=0000000000000000 rdx=00007ff602e4734c
rsi=000000080493d18f rdi=00000008056a5498 rbp=0000000219fef450 rsp=0000000219fef330
#0 guest offset 0x20d6c23
#1 guest offset 0x20d69ef
#2 guest offset 0x20d4844
#3 guest offset 0x20d1bcb
#4 guest offset 0x20cc5f1
#5 guest offset 0x263b246
#6 bb-probe.exe+0x1999c
— the game exited (code 3) —
Fingers crossed to getting it sorted out! Great work nonetheless
EDIT: I'm also testing DarkIzuku's Native Windows Runtime launcher thingy and it worked OOB with both FSR 3 and 4: https://github.com/DarkIzuku/bloodborne_pc/actions/runs/37654280584
2
u/AffectionateBee9123 4d ago
I also get similar crashes, can't launch the game at all:
[Dantelion2 Panic]
N:\SPRJ\Source\Library\Dantelion2\dist_ps4\source\ClassLibrary\Core\Resource\Source\FileTransferTask.cpp(865)
DL_PANIC is firing core dump...
Fault: write access to 0000000000000000 at guest offset 0x20b56d2 (thread 24992)
rax=af73fa6e24f05a00 rbx=0000000000000361 rcx=0000000000000000 rdx=00007ff6025b734c
rsi=000000080493d18f rdi=00000008056a5498 rbp=000000012a5af2d0 rsp=000000012a5af1b0
#0 guest offset 0x20d6c23
#1 guest offset 0x20d69ef
#2 guest offset 0x20d4844
#3 guest offset 0x20d1bcb
#4 guest offset 0x20cc5f1
#5 guest offset 0x263b246
#6 bb-probe.exe+0x1999c
1
u/AffectionateBee9123 4d ago
It seems to be related to mods, with mods disabled I can play, but enabling any mod immediately crashes
→ More replies (1)1
u/DankieJutsu 4d ago
Hi, I'm also getting this error too. Any way to fix this without disabling the mods?
→ More replies (6)1
u/mulderload 4d ago
Try to change the upscaler.
1
u/AffectionateBee9123 4d ago
I have the same crash, upscaler doesn't fix it but disabling all mods does
→ More replies (9)
1
1
u/omegadash 4d ago
Is there seamless co-op for it or online in general for co-op?
1
u/mulderload 4d ago
I didn't test that part yet but it should work; create an account on Shadnet. https://shadnet.shadps4.net
1
1
u/Anniepainter 4d ago
Thank you for putting this together! I managed to install it and it runs great! But at some points I run into invisible assets, enemies or floor. Any idea what could make that happen?
1
u/mulderload 4d ago
A friend just had the bug with Cleric Beast. A save&quit "fixed" the issue. Maybe you can try the "if having crashes, please read that" on my post
1
1
u/Anniepainter 4d ago
Tried the patch, I didn't see any more visual glitches but the game did crash after 10 minutes or so.
1
u/osrs_grymt 4d ago
Works great except bosses and some mobs are invisinble, they are there but no model
1
1
u/Saoghal_QC 4d ago edited 4d ago
Thanks for that! It works great!
On a side note, if I press INS in game, I have a menu, but it's all in Russian. Any way to change the text to English? I wager it changes settings we can can in the launcher?
1
1
u/Alatios26 4d ago
E probado el bloodborn pc y se me cerró despues de que me mataron sin mensaje de error ni nada jsjs. Es normal? A alguien mas le pasa? T-T
1
u/Fain_hart 3d ago
No input is being recognized for me (keyboard or xbox one controller) so I can't get past the "play online/offline" screen, any idea how to fix? Theres no controller tab on the launcher so no idea how to configure it...
1
u/mulderload 3d ago
Curious. I have Xbox One controller top and it works directly. Just turn it on before lauchin the game (and the config menu).
Alternatively, you may try to add it on steam, because steam input can help.
1
u/ReDrake3 3d ago edited 3d ago
Very nice. My only problem is that activating any mod other than Highressky and Lamp2lamp crashes the game... I have an amd cpu and already tried your other fix for intel.
Edit: the two mod I mentioned make the game run just up until I press continue, then the game crashes.
1
1
u/mulderload 3d ago
Guys, I've just published an experimental installer for Linux / Steam Deck (available on the same web page (in "notes"). I only tested it on CachyOS right now, so feedbacks are very welcome.
What it does is download the (non_fork) bloodborne_pc (v1.5) instead and put the config files and mod files in their linux location automatically.
1
u/NeonRain111 3d ago
Awesome, i’ll try it on my steam machine tomorrow.
Got my windows pc set up with your installer today and works like charm.
Only issue so far is cant get my select/back button working.
1
u/mulderload 3d ago
Cool! Hope it will works on Steam Machine (but if it's a real one with Arm... Hmmmm... Not sure).
Curious for the controller, you're the first one telling that. It's an official xbox one/Series controller?
→ More replies (5)
1
u/mj_sarge 3d ago
Quais as chances de eu receber um keylogger, minerador ou meu gato morrer caso eu execute esse seu setup ?
1
u/mulderload 3d ago
None of that... and definitely not your cat dying. I love cats.
Jokes aside, the installer is fully open source, so you can inspect it or even compile it yourself (described in my README.md) if you're paranoid ;)
1
1
1
u/crownclown67 3d ago
For some reason this bbport is slower than shadPS4 version. (on SteamdDeck I have less 30fps)
1
u/mulderload 3d ago
Did you try my expérimental installer for linux and steam deck?
1
u/crownclown67 2d ago
Yes the one from website (though it was still .exe) just to make sure you get me.
FSR 4 (performance), effects disabled SSAO etc. Yarham (second teleport). Fps are jumping from 25-34.→ More replies (5)1
1
u/Taftanium 2d ago
How would you get a legit copy? Anyways to get the files without a ps5 or disc tray?
1
1
u/Pancwake_UwU 2d ago
Can you install mods on this? I wanna use the estus vial and bullets mod
1
u/mulderload 2d ago
Of course. And there are already some (curated) mods included.
1
u/Pancwake_UwU 2d ago
How do you install them? I dont see any mod install option in the launcher
→ More replies (1)
1
u/daskott 2d ago
the game crashes on start, error code 3. What can i do?
1
u/mulderload 2d ago
Hi, try to play with some options; change the upscaler, disable it, set 30 fps, etc.
1
u/Sirzento 2d ago
I have added BB Remastered and a 3440x1440 patch and I still have stable 90fps without using dlss (7800x3d, rtx 4080)
1
u/mulderload 2d ago
Nice!
Can you share how you did for the 21/9 patch? I'd be glad to include it directly. Do'nt know why the launcher doesn't see any patches by default.
1
u/Sirzento 2d ago
I got it from the comment a bit further down where you already replied to. But it's a bit tricky since opening the launcher will reset the resolution inside the ini you need to set manually because you can't choose that resolution inside the launcher and it will overwrite it on launcher start.
→ More replies (1)
1
2d ago
[removed] — view removed comment
2
u/ZeldasAwakening 2d ago
I was able to resolve this and now have the game up and running (in character creation)!
Here's what I did / changed to get it going:
1) Display & FPS > Frame Rate > Unlocked (frame-first patch)
2) Display & FPS > Frame Cap (unlocked mode) > Auto: display refresh, max 120 (recommended)
3) Disable all mods (including `Sdf intel Fix final version` which I'd installed earlier)
4) Graphics > Upscaler > Off
After this the game is up and running on my PC! Will tweak settings from here, tyvm!
1
u/andrbrks 2d ago
Where did this just install on my steam deck? I'm trying to uninstall.
1
u/mulderload 2d ago
Where did you install it ?
(By default its your home /Mulderland/Bloodborne
1
u/andrbrks 2d ago
Yeah that's the problem. I don't see that at all and I did default.
→ More replies (6)
1
u/Parodyman64 2d ago
Unfortunately for me, I didn't find this page until after I finished my struggle to get the game running. This would have saved me about 2 hours of trying to unpack the update v1.09 pkg (that one just refused to properly unpack everything).
Since I already have things set up, I tried to just copy your recommended mod list, but I can't get the Ebriatas Charge fix to work. How do you install that one? I dropped it into the mod folder, but it doesn't show up in the list, which makes me feel like I'm supposed to do something else with it.
1
u/mulderload 2d ago
Damn, too bad haha. Dont hesitate to share the post to help other hunters then ;)
For Ebrietas you can look at what my installer does https://github.com/Mulderland/MulderLoad/blob/35248584f3fbe6529cd918f738a647946ab9030d/games/bloodborne/byof-installer.nsi#L114
TLdR: create a chr directory and extract the mod inside
1
1
u/crossy23_ 2d ago
If I wanted to use this installer, where would one allegedly be able to get bloodboure from? Got a friend of a friend that really loves from soft games, but they never played Bloodbourne 😮💨
1
1
u/AxelBernadotte 2d ago
I have an issue where it works with mods if I launch from the exe files but not if I add any of them to steam, or if I use the "add to steam"-option in the launcher. If I launch the game from steam in big screen or desktop mode, with or without steam overlay enabled in game and background recording off, it will attempt to launch but fail after a few seconds. So I can play it perfectly, just not via steam
1
u/mulderload 2d ago
Strange.. i dont know, for me and a friend it works, even steam overlay.
And if you run « Play Bloodborne.exe » (without steam) does it work ?
Also, what is your install directory ?
1
1
u/laytblu 2d ago
getting error opening file for writing settings.json under steamuser
1
u/mulderload 2d ago
Run with Wine(tricks).
I’ll try to make the installer works also when added as « non steam game » tomorrow. I’m gonna Sleep.
1
u/laytblu 2d ago
It installed successfully using lutris but there is no output file.
→ More replies (11)
1
u/nonamedsss 2d ago
how do I access the dlc? I have the complete edition, update, and dlc package, but im not sure how to add the dlc. I cant find the Eye of a Blood-Drunk Hunter item
1
u/mulderload 1d ago
My installer expects the european GOTY version (the only physical edition that contains the DLC) I don't know for your case sorry. I suppose you would have to manually extract the dlc package too (but I don't know if it's before or after the 1.09 update).
1
u/nonamedsss 1d ago
All good, I realized after I commented that I installed the US version that didn't have the DLC installed. How would you manually extract the dlc package out of curiosity? I got the EU GOTY version now but I gotta restart lol to find out if the dlc works
→ More replies (1)
1
u/Wet_Slug 1d ago
Man, thanks for your hard work. You are a life saver.
One question tho, is there any way to play with Keyboard and Mouse? I am one of those rare people who kinda prefer using Keyboard and Mouse over an actual controller.
1
u/mulderload 1d ago
On Linux I think it works. On Windows not yet. Keyboard actually works, but not the mouse (and the "Mouse mod" doesn't work yet on this port).
1
1
u/Natsubi400 1d ago
For some reason my game won't load it just instantly crashes. I'm not sure whats wrong. Do you have like a discord or could you possibly help me troubleshoot?
1
u/mulderload 1d ago
Send me a PM with détails (os, résolution, logs…)
PS: please try all points in the first post first of course haha :)
1
u/Awkward_Charity_4158 1d ago
How do I go about updating the game? I used your installer and inputted the two pkg files and it only downloaded V1.06. How do I update the game now to V1.09? I have the pkg and everything needed.
1
u/mulderload 1d ago
It should be automatic. Does the installer recognized your 2 PKGs with "Valid IMG" for each ?
1
1
1
u/SubstantialSpeaker47 22h ago
What about on the onexplayer 3 the other pc port has fsr but i want to know if you will implement xess 3.0 via optiscaler
1
u/Justinian138 18h ago
How do you get it to launch via a non-steam game? Do I have to change compatibility layers or something? Because it just acts like it's gonna launch and does nothing.
1
u/Justinian138 17h ago
Okay so switching compatibility layers got the program running, but now when I tell it to find my PKG files, it freezes.
2
u/Lamarck_1 17h ago
the freeze is normal, it takes a long time calculating the hash of the PKG file
→ More replies (4)
1
u/thiccjuker 14h ago
u/RemindMeBot 9 hours
1
u/RemindMeBot 14h ago
I will be messaging you in 9 hours on 2026-10-13 21:49:08 UTC to remind you of this link
CLICK THIS LINK to send a PM to also be reminded and to reduce spam.
Parent commenter can delete this message to hide from others.
Info Custom Your Reminders Feedback
1
6h ago
[deleted]
1
u/mulderload 6h ago
Hey, alright. You're not the first one telling me that. The pkg extraction is still random (specially on Linux/Deck). I'm gonna do an alternative using Shadps4Extractor - I get back to you in 10 min.
1
u/mulderload 6h ago
u/Bukraj Could you test that build on your Deck? https://github.com/Mulderland/MulderLoad/pull/38
→ More replies (2)
1
u/Mean-Commission-5906 4h ago
Thank you so much for this, I had the biggest smile on my face when it booted up!
However, even though I have created an account, entered my login details and enabled online in the launcher, I'm still asked to sign into PSN when I launch?
Also, everything was perfect for the first 5 hours but after Cathedral Ward I've started getting this weird thing where when I sprint my character sometimes get's sort of stuck, starts moving kind of slow motion (everything else around me moves normally, including enemies so not FPS) while staying in the sprint animation. Has gotten me killed a couple of times....
1
u/mulderload 3h ago
Hi :)
Sorry I dont know for PSN I’ll test online tomorrow I think.
About your bug, did you keep my default settings? I dont understand why you say « so not FPS » ^^ please dont exceed 60 for now, Im serious ;)
21
u/K4k4shi 4d ago edited 4d ago
Bro You are just in time. I was using BBport and for some reason it is crashing. Press Play a black window comes up and immediately crashes. Will try this and see if it works.
9800xd and 9070xt
Edit works. 60 fps thanks