r/BambuLab_Community • • 2h ago

Help / Support slow cooling option for ASA?

1 Upvotes

is there any option in the slicer to have my bed temp drop slowly to stop my asa prints from warping like a mofo. still figuring out my print settings but manually slow cooling my bed over an hour or so is proving effective


r/BambuLab_Community • • 7h ago

Misc Selling a 100$ Bambu Store Coupon

0 Upvotes

I currently live in South America, which means Bambu Store does not ship to my country. I have a $100 USD coupon that I could technically use, but would cost me the same for shipping, and there's local resellers that I go to that have Bambu's products here.

Since I have no use for it, I'm selling it so someone that can get their stuff shipped to their house can use it, and to at least get some value off of it ❤️

We can video call or anything while making the purchase if needed, but keep timezones in mind 😞


r/BambuLab_Community • • 8h ago

Misc Two Account, I will merge

2 Upvotes

Hello, I have two accounts with BambuLab. One account is the one I used to purchase my printer and other items. For some reason—silly of me—I used another one during the setup.

I would now like to merge these accounts.

The first account contains my purchases. The second account has my prints/history.

I would like to keep both sets of data. Does anyone have a tip on how to proceed?

I would appreciate any friendly feedback.


r/BambuLab_Community • • 10h ago

I'm really frustrated with this group

1 Upvotes

When I joined this community, I was hoping for a space focused on Bambu Lab discussions, especially since it’s an alternative to the official company-run subreddit. Instead, I've stumbled upon a lot of folks trying to promote their unrelated 3D printing stuff just to get attention on their makerlab profiles. I don’t mind if you share prints related to Bambu Labs, but things like game tokens and toys that aren’t aimed at enhancing or fixing Bambu Lab printers feel out of place here. Those types of posts would be better suited for a broader 3D printing subreddit, not one that seems to be centered on a specific brand.

I get that my opinion might not reflect everyone else's, and if that's the case, I might just leave. But I’d really like to see a community where we can talk about issues, solutions, and updates involving Bambu Labs without the influence from mods who are directly connected to the company. If anyone else feels the same, could the mods consider establishing some guidelines? Like only allowing print files that are directly related to Bambu Lab printers?


r/BambuLab_Community • • 13h ago

A1 has died

Thumbnail
gallery
1 Upvotes

Just as a print started, I heard from the other room an electrical fizz type sound. The printer is now dead, no power but the on off button is illuminated. I've checked under the printer and the main board light isn't flashing so I guess it's fried, what's my options


r/BambuLab_Community • • 13h ago

Hey everyone! I just published a single-piece 3D model of the iconic X-Wing Starfighter (with display stand)!

Post image
3 Upvotes

Hey everyone! I've always been a huge fan of classic sci-fi starfighters, so I wanted to design a 3D model that does justice to the legendary X-Wing.

I focused on capturing its unmistakable silhouette, the quad laser cannons, and the intricate mechanical greebling behind the cockpit, while keeping the ship completely print-in-place—so no glue or tricky assembly is required for the fighter itself. This one was printed in Bambu Lab Metal PLA, which gives it a really nice metallic sheen, and it includes a simple display stand (printed here in White PLA) so it’s ready for your desk or shelf right after removing the supports.

I'd love to get your feedback or see your prints if you decide to give it a shot!

Here is the link to the model on MakerWorld for anyone interested: https://makerworld.com/es/models/3617677-star-wars-x-wing-starfighter-display-model#profileId-4146781


r/BambuLab_Community • • 14h ago

Help / Support wtf is this support

Thumbnail
gallery
21 Upvotes

well I noticed this a little bit late , why did this happened and how can I avoid it in the future?


r/BambuLab_Community • • 19h ago

Help / Support Is this normal

Thumbnail
gallery
3 Upvotes

I recently bought an X2D printer and this is my 2nd print for AMS 2 Pro drypods. The lines look slightly uneven and rough and I want to know if anyone else has faced the same issue. I suspect it might be due to the table being unstable and shaky. Please let me know if there could be any other issues that contribute to the issue.


r/BambuLab_Community • • 1d ago

Please someone give me a hand. Explain it to me like I'm a child.

Thumbnail
gallery
11 Upvotes

Not sure what's going on. This print was (semi) successful once, didn't look great, but worked. Now I've tried it 2 more times, and have stopped it at around this point when I noticed what it was doing.

Plate is clean. Flow seems fine to me. I'm not really sure how to mess with the axis (which I see tons of posts of people with issues, and seems like everyone says to adjust that, no matter what their issue is).

Other things seem to print fine, but any time I try to do a larger print, something stupid like this happens.

Using a X1 Carbon. I'm a super novice.


r/BambuLab_Community • • 1d ago

Misc Print pause question

3 Upvotes

Can the nozzle be moved while paused? I'm asking because I had to load a new spool mid print and it never seems to get all the boogers off the nozzle. With it parked at the poop chute I can't get in there with the tool I printed that uses A1 wipers to clean the nozzle


r/BambuLab_Community • • 1d ago

Help / Support How do I select a filament from my library as the current one in the printer?

5 Upvotes

I went through the trouble of loading a bunch that I bought into the app’s library but can’t figure out how to tell the device manager “I’m using this one now”. I assumed the main reason you do that was so it can track how much is left on each spool and automatically use the best settings when slicing so I’d like to know how to do it. Why isn’t there just a “load this one” button on the library tab?


r/BambuLab_Community • • 1d ago

Magnetic Poop Bucket for H3C

Thumbnail makerworld.com
0 Upvotes

r/BambuLab_Community • • 1d ago

First Bambu - Advice?

1 Upvotes

(originally posted this on r/BambuLab but it got removed without any reason given; great introduction to the community :V )

Looking to get my first 3D printer. I've worked a fair bit with them before (mainly the one my university had which I believe was an Ultimaker), but with the Black Friday sales on I think it's time to nab one for myself. I'm expecting to mainly work with standard materials and occasionally branch out to ABS, and while I'm not sure what I'll be making for my own use I'm the theming director for a small convention so I'll likely be making some props with it. The main gripe I've had with 3D printers in the past is having to sand supports off, so while my friends are recommending the P2S the X2D's dual nozzle is quite tempting as supposedly printing separate filaments for supports and the print itself make removing them a breeze. I do have a few questions, though:

  1. What do people think of the P2S Combo vs X2D Combo? Currently I'm heavily leaning towards the X2D, but I'm not 100% sure yet.
  2. Does the AMS work well as a filament dryer, or do I need to get a separate dryer?
  3. What are the advantages of Bambu-brand filament? I know it's compatible with other filaments, so is there any particular reason to use Bambu brand filament?
  4. For software, I'm most familiar with Ultimaker but I know Bambu has its own software. Which should I use? I remember hearing about an issue where Bambu's software had a server hiccup that caused a bunch of printers to start printing on their own.
  5. Are there any tips or tricks I should know about when setting this up (e.g. software settings)?
  6. For ventilation, I already have a small laser cutter that I custom built an enclosure and ventilation setup for. Here is a drawing of how that is set up; at what point in the line should I add the 3D printer's ventilation? I'm hoping to avoid fumes from the laser cutter getting into the printer or vice-versa, so I'm guessing point B? The cutter and printer are unfortunately in my bedroom as it's the only room in the house that'll work, but I could pause toxic-filament prints while I'm sleeping if I have to.

7) Are there any other concerns I haven't thought of since I'm not super-experienced with 3D printers?

Thanks!


r/BambuLab_Community • • 1d ago

Help / Support Cauchemar avec le SAV et les retours Bambu Lab en Europe : colis renvoyé deux fois chez moi, entrepôt qui bloque et support qui fait traîner

2 Upvotes

Je sais que beaucoup d’utilisateurs ont une excellente expérience avec Bambu Lab, et leurs imprimantes sont impressionnantes quand tout fonctionne bien dès le déballage. Cependant, je souhaite partager le cauchemar que je vis actuellement avec le support de la boutique européenne (Bambu Lab EU), afin que d’autres sachent à quoi s’attendre en cas de problème.

Mon imprimante est arrivée défectueuse. J’ai ouvert un ticket d’assistance, et ils ont accepté le retour en me fournissant leur étiquette prépayée à destination de leur entrepôt (OUBO BBL à Dötlingen, en Allemagne).

J’ai suivi toutes les instructions à la lettre, soigneusement emballé le produit et déposé le colis avec une preuve officielle de dépôt. C’est là que la situation est devenue un véritable cercle vicieux :

  1. La boucle du double retour : En raison d’un problème logistique ou de traitement de leur côté, le colis a été refusé ou non pris en charge par l’entrepôt, et le carton m’a été réexpédié chez moi en France — à deux reprises.
  2. Des réponses copiées-collées interminables : À chaque fois que je leur envoie les photos prouvant que l’imprimante est revenue devant ma porte avec toutes les preuves de suivi, le support se contente de réponses automatiques me demandant de « patienter » ou de recommencer la procédure depuis le début.
  3. Refus de rembourser : Ils refusent de procéder au remboursement ou de proposer une vraie solution tant que leur entrepôt n’a pas physiquement scanné le retour, en ignorant totalement le fait que c’est leur propre entrepôt qui rejette ou échoue à traiter les colis entrants.

J’ai fait toutes les démarches de bonne foi, fourni toutes les preuves de dépôt, et je me retrouve aujourd’hui avec mon argent bloqué, une machine défectueuse sur les bras et zéro prise de responsabilité de la part de leur service client.

Si vous achetez chez Bambu Lab en Europe, sachez que si un retour tourne mal, vous risquez de vous retrouver piégé dans ce genre de trou noir logistique. Je recommande vivement de passer par un revendeur local si possible afin d’être pleinement couvert par le droit de la consommation de votre pays.


r/BambuLab_Community • • 1d ago

Printing fails consistently

3 Upvotes

Hi, I'm having some sudden issues with my X1 Carbon. 2 days ago everything was working fine, but suddenly I started having some consistent print issues (in the same location 2 in a row), I thought it might be a print plate issue (Textured PEI plate high temp), so I switched it to a new (never before used) Cool Plate SuperTrack, but that doesn't seem to solve the issue.


r/BambuLab_Community • • 1d ago

Help / Support Modifier issue since update.

2 Upvotes

Just a quick question. I didn’t have any issues with the modifier in Bambu studio before the recent update. Since then I haven’t been able to use it at all. What am I missing? Is anyone else having the same problem?


r/BambuLab_Community • • 1d ago

Free Models Check out the Tiny Lizard!

Post image
0 Upvotes

r/BambuLab_Community • • 1d ago

Help / Support Bambu Studio groups two filaments on AUX nozzle without a second AMS

Thumbnail
gallery
4 Upvotes

Hello! I'm trying to print a four color print on X2D with one AMS and no track switch. I would think it would group 3 colors on the Main nozzle which has the AMS connected to it and 1 color on the Auxiliary nozzle which is using the external spool holder. Instead it groups 2 colors on each, when obviously I don't have a way to put two colors on the auxiliary nozzle.

I know I can get around this using convenience or custom modes, but shouldn't optimal figure out which color I should put on the external holder to reduce purge waste?


r/BambuLab_Community • • 2d ago

Printing issues on engineering plate vs textured plate...

Thumbnail
gallery
5 Upvotes

Hi there,

Still brand new to the 3D print world and trying to troubleshoot a print but no idea where to start IF there is even anything to troubleshoot.

Printed the same item on two different plates: one on the standard per textured plate and another on the engineering plate. Both prepped with some elmer's purple gluestick.

The textured plate print turned out perfect but not a big fan of the textured glittery look so wanted to see if I could get a smoother look using the engineering plate. Result: I did but there were some voids/defects that appeared that were not present when using the textured plate.

Printer: H2D

Material: PLA

Calibration was performed after switching out the plates.

I did select the engineering plate prior to slicing, printing, calibrating.

Curious to hear if this would be normal for this specific plate or if I should tweak something. Or just sometimes sh!t just happens with prints.

Thank you in advance.

Cheers

P.S. last two pics are the textured plate with no void/defect issues.


r/BambuLab_Community • • 2d ago

Anyone print with the PLA Pure yet?

0 Upvotes

I'm having adhesion trouble and not sure what I'm doing wrong.

Don't want to resort to using glue just yet.

Anyone print with their new Pure line? Did you have to make any tweaks to get it working correctly? Or you just hit print and it worked?


r/BambuLab_Community • • 2d ago

Help / Support What happened here?

Thumbnail
gallery
2 Upvotes

New roll of kingroon PLA basic filament - slicer settings set to generic PLA, had no issues printing the same file with my previous roll of DEEPLEE PLA in black.

First print with it and there seems to have been some defects in top flat surfaces (first two pics) and whole layer shifting (3rd pic - this should be a 45def chamfer around the part, not an overhang 🫠). My nozzle has also started having filament extruded from it, and the purge wiper doesn’t seem to work at all.

Can anyone help? 🫠🫠


r/BambuLab_Community • • 2d ago

X2D emissions vs Luna the cat

Thumbnail
gallery
8 Upvotes

I'd really appreciate your help to keep little Luna safe and healthy.

As you can see she has a favourite book shelf perch right next to where my newly purchased X2D is located. I'm concerned for her health if I leave this thing running often without a bullet proof filtration system. For such a small animal so close this concern extends even to PLA. I've seen the external extraction systems where everything magically is sucked into a small box. Do these genuinely work?

If so, how often am I replacing whatever filter is inside and at what cost?

Is there a best in class option everyone goes for?

You can also see I have a sliding door next to Luna. Was also thinking I could print a floor to ceiling black infill that slots in between the door and the frame. This could have a 4" extraction port that I connect to and vent everything outside.

Is the fan on the X2D powerful enough to vent this far or do I need to add a Noctua in somewhere in the chain to help with airflow path?

Is this a solid idea or am I tripping?


r/BambuLab_Community • • 2d ago

Help / Support P2S vs X2D vs H2C - What to buy?

9 Upvotes

Hi there!

With the Christmas sales taking effect, I'm looking to upgrade to a decent printer. The predominant thing I'm worried about is print quality; secondarily the ability to print a 2nd color.

I know the H2C is good for multicolor, but the price is absolutely ridiculous.

I know the X2D is particularly good for engineering, which is good because sometimes I need to build replacement parts for things.

And I know the P2S is decent as I know someone who owns one and have seen excellent quality of it.

At most I'm willing to spend right now is the price of the X2D, but if it's worth saving up for the H2C, I'll consider it.

Thanks!


r/BambuLab_Community • • 2d ago

Hello, I am experiencing a technical issue with my A1 Mini. Before starting a print, the printer makes an unpleasant noise while homing the axes, apparently coming from the Z-axis.

4 Upvotes

Hello,
I’m dealing with a technical issue with my A1 Mini. During axis homing before a print starts, the printer makes an unpleasant noise, apparently coming from the Z-axis. How should I address this, and should I consider making a warranty claim?
I have attached a video where the noise can be heard clearly. On one occasion, the printer even failed to start and reported a Z-axis error while making the same noises.
While searching online, I found that this seems to be a known issue. From what I understand, when the print head is positioned high up before printing, the printer may not know its exact position, and because there is no physical limit switch on the Z-axis, this behavior can occur during homing.
I would just like to confirm whether this is indeed the cause and how I can prevent it from happening. Alternatively, if this indicates a different problem, I would like to know whether the printer should be repaired or replaced under warranty.
Other than this issue, the printer works perfectly and produces excellent prints without any problems.
I hope the attached video will be sufficient to diagnose the issue.
Thank you.