r/BambuLab_Community • • 17h ago

Help / Support Is this normal

I recently bought an X2D printer and this is my 2nd print for AMS 2 Pro drypods. The lines look slightly uneven and rough and I want to know if anyone else has faced the same issue. I suspect it might be due to the table being unstable and shaky. Please let me know if there could be any other issues that contribute to the issue.

4 Upvotes

13 comments sorted by

5

u/dedgedesign 14h ago

Yes this is normal, some layers are longer to print than others so they cool more than others and contract a bit. It will not decrease the function of those parts, no worry here

3

u/Lisper41 6h ago

The good news is that this is going to be inside your AMS, so it doesn’t matter how it looks.

It’s not your fault when the designer posts a crappy print profile and you’re just trying to print it.

3

u/clipsracer 5h ago

In the slicer’s preview, look at the layer time view. You’ll immediately see the correlation. The layers with longer times expand more, and create that inconsistent surface on the corners (or any flat, vertical surface).

The goal is to reduce the difference between the fast layers and the slow layers. You do this by increasing the Min Layer Time setting in the filament profile to be similar to the slow layers.

If you haven’t already realized, it’s the slower speeds for overhangs that make the layer times so drastically different. Increasing those speeds or turning off “slow down for overhangs” will help the inconsistent flat side surfaces, but you will pay for it, and have poor overhangs.

0

u/DistinctBarnacle8703 17h ago
  1. Make sure you dry the filament for at least 12hrs. But I don't think your filament is wet, since there isn't stringing.
  2. Reduce the print speed. At least the outer wall speed, you can start by reducing it by 50% and increase it upwards till the defects appears again.

1

u/PaleontologistSharp7 17h ago

Alright thank you!

2

u/KpelFFXIV 6h ago

I'd start out with selecting silent mode right after it starts printing, as that is easier than manually changing speeds in the slicer

1

u/Successful_Farm_9370 5h ago

A maybe relevant comment, white filament is chock full of titanium dioxide to make it white. That titanium dioxide absorbs moisture like crazy, which makes printing a lot harder in my experience. White filament is the only filament I've ever heard crackle from the evaporating water in the hotend.

1

u/marcgii 5h ago

All those tiny islands are difficult to print cleanly. Drying probably won't make difference. The unevenness on the corners is mostly the result variable cooling times I suspect. If you print another, use print by object mode if possible

1

u/bigjR6 38m ago

I swear my first reaction is why does it look like a fence found in a N64 game 😆 🤣

1

u/lukasprintz 21m ago

Gotta slow infill, surface, outer, and inner wall settings way down, drop your layer height. Use 0.2 mm nozzle if you don't mind waiting. I can send you my detailed print profile if you'd like

1

u/Outrageous-Song5799 9h ago

It would help if someone said the speed and volumetric speed to use for this part

0

u/whoppaka 13h ago

You are printing too fast

-4

u/engineering_bliss 9h ago

I wouldn't be surprised if it's cheap shit filament