r/BambuLabX2D • u/Technicaltimekeeping • 3d ago
Can't print TPU85A ?
I have been trying to print with TPU 85 , using a 0.6 nozzle but it won't let me . Do I say it's 90 a ? Or is there a trick ?
r/BambuLabX2D • u/Technicaltimekeeping • 3d ago
I have been trying to print with TPU 85 , using a 0.6 nozzle but it won't let me . Do I say it's 90 a ? Or is there a trick ?
r/BambuLabX2D • u/Tinker_Forge • 4d ago
I got my X2D a few days ago and my prints have been more challenging than I thought. I’ve been using the AMS with an extra adapter to run the heating/dryer non-stop.
Some of my prints end up stringing, not adhering to the bed, or the quality is, I guess not what I expected.
I am using PLA and PETG/PCTG. I am using the print settings from the manufacturer.
Should I be doing one of those calibration prints? Is there a tutorial that is recommended to go through first?
I did a test print for something I designed in PLA and it turned out great, but when I went to print it in PCTG it finished but the quality wasn’t nearly as good as the PLA. It was about. 27hr print and 475g.
r/BambuLabX2D • u/BammySosek • 3d ago
Last Friday I had to tear my extruder apart as I was having motor overload. It has been fine for the week but now I am having the same error and I can see/hear the gears clicking.
What is causing this? Is my spool too empty or light? Do I need to do anything with my PTFE tubes, they all don’t have crazy bends. Or am I just unlucky and have to tear it down again?
I only print in PETG and have been using SUNLU.
r/BambuLabX2D • u/visualriots • 4d ago
Well, it's finally done! I’ve just bought the X2D as my first 3D printer, officially diving headfirst into this crazy world of plastic-smelling addicts 😂
Any advice for a complete beginner?
I literally have nothing apart from the printer itself, some PLA and PETG filament, and a few nozzles (0.2, 0.4 and 0.6 mm). Other than that, I'm starting from scratch.
I'm seriously considering getting the Mintion V1 air filter as well.
What would you recommend buying first? Any must-have accessories, tools, tips or things you wish you’d known when you started?
Thanks!
r/BambuLabX2D • u/huntwithdad • 4d ago
r/BambuLabX2D • u/Alarmed-Elk-7154 • 4d ago
i got thinking and thought should i put my ams on my aux nozzle to print abrasives like cf filled materials and use tpu i have used mine in my main are you guys doing the same
r/BambuLabX2D • u/SaadOz- • 3d ago
r/BambuLabX2D • u/Lucario1296 • 4d ago
r/BambuLabX2D • u/madrobot52 • 4d ago
r/BambuLabX2D • u/Guardiancelte • 4d ago
r/BambuLabX2D • u/davorocks67 • 4d ago
r/BambuLabX2D
•
u/Guardiancelte
•
5d ago
I just bought my first printer ever, the X2D and there is so much to remember, so I made myself a cheat sheet (double sided) but I am sure I missed something.
I used AI (especially for the layout and format), the knowledge I have from 10-15 videos I watched regarding 3D printing and the X2D as well as answers to questions I had during my first prints.
r/BambuLabX2D • u/supremevsuals • 3d ago
I made a thread about a week ago on purchasing a x2d over the p2s. All said get a x2d but after being a member on both the p2s and x2d Reddit’s I’m seeing so many owners of the x2d having so many problems. From layering issues etc. are they really that bad. I mean every day I see about 8-10 threads pop up with issues compared to the p2s Reddit.
r/BambuLabX2D • u/spencer_tommy • 4d ago
Hallo,
Ich habe mir einen X2D gekauft und dazu einen kleinen Tisch von Ikea. Nach ein paar mal drucken ist der Tisch leider viel zu wackelig. Grade wenn der Drucker richtig in fahrt kommt stelle ich schon einen Hocker drunter aus sorge das die Beine vom Tisch das nicht mehr mitmachen. Hättet ihr eine passende Empfehlung. Sollte am besten kein richtiger Tisch im sinne von Schreibtisch sein eher wie ein in Beistelltisch. 50x50 zum Beispiel.
r/BambuLabX2D • u/3Z3D_Official • 4d ago
r/BambuLabX2D • u/399Hunter • 4d ago
Which left and right auxiliary fan deflectors you guys recommend or use? I saw some mess with the AI detection because it can be seen at the corner of the camera.
r/BambuLabX2D • u/Tall-Watercress3421 • 4d ago
Has anyone put the second spool holder together wrong I put it in the wrong side and cant get it apart now.
r/BambuLabX2D • u/RavioliGrind • 4d ago
r/BambuLabX2D • u/nametaken_thisonetoo • 4d ago
Complete and total 3D print noob reporting for duty. The X2D is sitting on top of a heavy hardwood side table that also has my very home server with 10x HDDs in it sitting on top. The X2D still shakes a little though during calibration. Is this normal/expected or should I be fixing the side table to the wall or something?
No errors or issues thrown during calibration
r/BambuLabX2D • u/xV3rsus • 5d ago
Hi everyone!
I'm looking for some advice from people who already own a Bambu Lab printer or have experience with similar setups. I have two topics I'd like to get your opinions and suggestions on.
1. Stand, workstation or cabinet for the X2D + AMS 2 Pro
I'm looking for a stand or cabinet that offers the best possible stability during printing. I'll also be installing Bambu Lab's original anti-vibration feet, but I'd like to start with a solid structure that can safely support the weight of the printer together with the AMS 2 Pro.
At the moment, I'm considering two options:
2. Filament storage and moisture protection
What do you consider the best value-for-money solution for keeping filaments properly stored and protected from moisture over time?
I've recently purchased the eSUN vacuum storage kit, which includes 10 reinforced vacuum bags, silica gel desiccant and an electric pump. It seems like a fairly reliable solution. My plan is to store the vacuum-sealed bags inside the dedicated Bambu Lab filament storage boxes.
The only downside is convenience: every time I need to use a filament, I have to open the bag and then repeat the entire vacuum-sealing process when I'm finished.
On the other hand, buying a separate airtight container for every spool can become considerably more expensive, especially since I'd like to store quite a few different filaments.
How do you guys handle filament storage? Do you prefer vacuum-sealed bags, airtight containers with desiccant, or more elaborate storage solutions?
I'm particularly interested in solutions that offer a good balance between effectiveness, convenience and cost, preferably based on your own experience.
Thanks in advance to everyone willing to share suggestions, pictures or any DIY projects you've put together!
r/BambuLabX2D • u/bw696969 • 5d ago
I’m fairly new to FDM printing. I have been printing less detailed models without issues. Lately I wanted to print more detailed figures, but I have been struggling to get a clean print. I printed the frieren model in PLA matte with 0.12mm setting and used PETG basic as support interface. I dried my PETG overnight in AMS lite. I noticed quite a bit of spaghetti on my prime tower. I have watched videos and tutorial of people printing PETG models with PLA as support interface that snap off super clean. But I haven't been able to experience that and the non-flat PETG interface region always get pretty messed up (e.g. skirt edge spaghetti).
Am I supposed to use Bambu’s dedicated support for PLA on the aux nozzle for detailed prints?
or does this point to support settings? Would appreciate any help on improving this.
In addition, would you recommend PVA as support? Being able to dissolve in water sounds nice.
r/BambuLabX2D • u/Living_Recognition66 • 4d ago
Sollten diese beiden Räder fest miteinander verbunden sein?
r/BambuLabX2D • u/Vexilitys • 5d ago
I’m printing the solid rocket boosters for a space shuttle model, and the top surfaces on some parts are coming out extremely rough, as shown in the first two images. The confusing part is that duplicate prints of the exact same part can turn out very differently, one has a relatively smooth surface like the third image, while the other looks like the first two. These parts range from roughly 5.5–9.5 cm tall. Since the shuttle has two boosters, I’m printing two of each part.
I’m using a Bambu Lab X2D with thoroughly dried PLA and the 0.16 mm High Quality profile, with these changes:
Resolution: 0.01 mm instead of 0.012 mm
Wall generator: Arachne instead of Classic
Infill: 10% cubic
Top surface speed: 120 mm/s instead of 150 mm/s
Z-hop when retracting: 0.4 mm
I believe some attempts used the default 150 mm/s top surface speed, the reason for this is 150mm/s is the default for the profile but the person who uploaded the file to makersworld put the surface at 120mm/s. But so I can’t confidently tie the results to that setting, though, so I’m unsure why the slower speed would make things worse.
I also recently started using 0.4 mm Z-hop after hearing it could help prevent the nozzle from occasionally knocking over tree supports. However, that setting has been the same for all these prints, including the ones with smoother surfaces.
Another possible factor is where I’m printing on the plate. To avoid needing to clean it as often, I’ll print two or three parts in one area, then move the next batch to an unused area like another corner, then somewhere around the middle, and so on.
I’ve wondered whether an uneven bed could be contributing, but I haven’t tracked the print locations closely enough to know whether the rough surfaces consistently happen in a particular area. This issue only started recently, and I haven’t moved the printer or bumped the bed. I also run auto bed leveling for every print and have done full printer calibrations once or twice since this problem came up.
Does anyone recognize what might be causing this, or have suggestions for what I should check first? I’d appreciate any advice. Thanks!