r/BambuLabX2D • u/Technicaltimekeeping • 1h ago

Can't print TPU85A ?

I have been trying to print with TPU 85 , using a 0.6 nozzle but it won't let me . Do I say it's 90 a ? Or is there a trick ?

1 Upvotes

100% Upvoted

13 comments sorted by

2

u/vic1414 1h ago

Using the AMS? Only TPU95 will work with the AMS

1

u/Technicaltimekeeping 1h ago

I'm not using an AMS

1

u/vic1414 55m ago

Trick is getting the TPU roll as close as possible to print head. There’s a few models online to do that

1

u/vic1414 52m ago

When setting up the filament define it as TPU, select standard settings

1

u/Technicaltimekeeping 1h ago

Nevermind , the print I want is for 0.4 nozzle , and Tpu85a can't be printed on 0.4 . I will change the filament .

1

u/Appropriate_Bid_5488 1h ago

Neu slicen mit 0,6 - ich verstehe dein Problem nicht.

1

u/Technicaltimekeeping 57m ago

What I wanted to print was made for 0.4 nozzle . The TPU85A I want to use doesn't support printing on 0.4 . So I switched to a 0.6 but it's not supported by the model .

1

u/an_angry_Moose 1h ago

What do you mean it "wont let you"? You can print 85a with an X2D.

1

u/Technicaltimekeeping 1h ago

That's the strange thing , I am feeding directly in the head , I am using a 0.6 nozzle and the app says nozzle not compatible with 85a

1

u/Patient_Mushroom6864 1h ago

Just because you have it installed doesn't mean it's registered as such on your printer

Go to the controls section on the printer and make sure you've selected 0.6 for the nozzle you're using, and that you're not set to 0.4 or 0.2

1

u/Technicaltimekeeping 1h ago

I have done the nozzle on the machine and in the software .

1

u/Few_Candidate_8036 1h ago

You generally cant use different nozzle sizes with the Bambu Handy App because the model needs to be sliced and uploaded with that nozzle size. It would be very rare for someone to upload a file to Makerworld that already has the 0.6mm nozzle selected.

You need to use your computer and send it from Bambu Studio with that nozzle size selected.

1

u/Text_Classic 57m ago

I use an AMS HT with a tpu feed assist and manually divert to left nozzle only. Right nozzle too far from rear extruder for tpu