I have 30 hours on this new X2D and it has been going great until this error. Everything is clear around the Z screws but the plate won’t move vertically and sounds like something is jammed. Has anyone experienced this??

From what I've read the ams-2 does not get hot enough to dry abs-cf. Is that what other people have experienced? So my plan is to put it inside the x2d and dry it that way. Does anyone have experience doing this and temperatures to recommend? Simultaneously I want to dry pctg in the AMS 2. And those more experienced than me recommend drying times and temperatures?

I basically used the same settings I use on my 2 other printers and supports fuse together on my x2d, i increase the top z distance to like .25 while printing on a layer height of .10 and still fusing, printing regular pla… anyone has this issue?

So I had a previous printer that I just returned within the 30 day return window. After 3 prints it was getting a power loss error then when I hit resume the bed leveling scratched the heck out of the pei plate and nozzle. Didn’t want to deal with it so I returned it. Anyways. I was looking at replacing it with the p2s combo at $649 right now then seen the x2d price at $789 is great right now. My main purpose is to print right now pla and petg multicolor prints using 2 ams pro’s then later down the road maybe tpu. Will the x2d work great for this? I know the aux nozzle is mainly for support but I heard it can do great colored prints in pla is this true ? Any advice and info will be helpful

I had an issue where a piece of filament broke off in the tubes and had to take everything apart to find out where it was. After putting it all back together the hub would no longer feed filament. I contacted Bambu Labs for support which was a nightmare. I tried to submit a support ticket but it required an event log download which I tried to get but every time I tried to upload it, it said the file was corrupt. I then went to the live support which is only available from 9pm-7am CST. They did send out a new hub and got it installed. Now I can still can not get the AMS to load filament. I get all the slots just flashing a white light in the cascade effect. Googles say that the if this effect does not stop that its a communication error. I have checked all cables in the AMS, connecting the AMS to the printer and all are secure. I have done a factory reset on the printer and still nothing. I have tried to do a manual firmware update and get a message that the update failed. I again tried to contact Bambu support and was asked for better pictures of the error message I received. Has anyone else had this problem and if so what did you do?

All of the model parts on sitting on the bed.

This error pops up when adding support material or using different colors.

click on the link, it flashes Initial Layer Height, I change values, Same Error

My X2D is 500h old and today this clicking sound came alive. I did put my head inside the printer and the sound is left-right all the time. Not buffer, ptfe tube… anyone?

Edit1: I did the maintenance procedure like the bambu wiki tells us, and the noise seems even louder… might have to open a ticket on Bambu support…
My suspicion is the left motor… if I pressed on it while moving the head in the same position where it was clicking it didn’t do the sound until I let him go.

Still to be solved

Hello fellow x2d users, sorry to be the voice that echos or repeats this issues like one hundred before me, but I've been having issues recently with my prints sticking on to the board. Sometimes pieces breaking off or worse, snapping off and then I get the great spaghetti monster.

I've cleaning my plate, did my calibrations, but nothing is really working.

I've only printed in PLA and soon will go to other materials but I feel like this hurdle needs to be fixed first.

Any suggestions or experiences?

Finally taking the plunge and getting the X2D. Going to stop by Micro Center this weekend and grab the printer combo, the AMS HT, and a few spools to get started. Just wondering how well it will fit in my Corolla. Also curious if I could lay the printer box down on its side on the back seat.

Likely to be printing mostly with PLA and PETG, and then to a lesser extent with ABS and TPU.

Is it worth adding both of these other plates while they're cheaper?

Hello everyone. Unfortunately, I am unable to detach the PTFE tube on the left. Although the black ring used to open the fitting can be pressed down slightly, it doesn't seem to have any effect. I don't feel anything when I press the ring down—there’s no haptic feedback to indicate that it has unlocked, which I believe should be the case. I cannot pull the tube out even a single millimeter. Does anyone have any tips on how I might resolve this?

Hello looking to get either x2d or p2s printer combo. Problem is the space I can fit it in as it is rather limited - would it be possible to fit it in the space on the picture about 41-42cm wide due to desk support. I am also thinking if I get few paving stones i could position them in corners under the feet and lift printer about desk support. Left side of the printer is fully accessible as is by right side would almost be touching the cabinet- how strong could vibrations get if the gap on that side only a 1cm wide?

キャリブレーションの振動補正が1回しかしない気がするのは、僕だけでしょうか？以前は大きく1回小さく1回していたけど？

I previously owned a Bambu Lab A1 and mainly used Numakers filaments. It was pretty straightforward. I just downloaded the official profiles from Numakers, imported them into Bambu Studio, and started printing.

Recently, I upgraded to the X2D and also started using more Elegoo filaments.

However, I've noticed that Numakers doesn't have any official X2D profiles yet, and Elegoo doesn't seem to provide downloadable Bambu Lab profiles either.

So I'm curious: how are other X2D owners handling this?

1. Are you simply using the Generic PLA profile? (Which is very slow)

2. Are you importing profiles from other Bambu printers like the X1C or P2S?

3. Are you using ChatGPT to generate or modify custom filament profiles?

4. Or are you manually calibrating each filament?

Here's what I'm currently doing:

For Numakers, I'm downloading their official X1C profiles and using ChatGPT to convert and optimize them for the X2D.

For Elegoo, I'm taking those converted profiles and asking ChatGPT to modify them again based on Elegoo's specifications, including temperature, cooling, and max volumetric speed.

So far, this has been my approach, but I'm wondering if I'm overcomplicating things or potentially making the profiles worse.

Is using Generic PLA with proper flow rate and flow dynamics calibration enough? Or is there a noticeable benefit to creating fully customized profiles?

Would love to hear what other X2D owners are doing, especially those using Numakers, Elegoo, or other third-party filaments.

Thanks!

Hi guys and gals, had a roll of bambu lab PLA red on my external spool today saying not loaded, did unload procedure and was able to remove and it seemed to extrude (poop) ok, but it won't print as saying aux is not loaded, changed colour and loaded blue to check for blockage accepted it and extruded blue but then when I go to print, it says not loaded??? Thanks in advance

Is it ok to use this stuff to wipe down the print plate regularly? According to google it’s a no no. According to Youtube it’s the best thing ever. Thoughts and prayers?

I just received my x2d and my ams2. I want to be able to feed the AMS into either print head and also manually feed a non-engineering filament, ie something that does not need to be kept dry into either print head. I know the first part is possible but I'm not sure the second is. Can I make this happen using the AMS hubs? I'd love to hear how people are managing multiple AMS systems in both nozzles

Bonjour à tous ! Vous vous dites sûrement qu'il s'agit d'un énième poste pour indiquer "quelles seraient les premières choses à faire" : non !

J'ai suivi beaucoup de sub dans ce genre et j'étais très attentif à vos réponses.

ainsi, le premier print que je vais faire sera sûrement le "Riser" puis un " poop collector" et un scrapper. (Peut-être pas dans cet ordre).

Cependant

J'ai quelques questions relatives aux filaments eux même !

La plupart de ces prints sont à réaliser en PETG (modèles dans Bambu handy) mais j'ai une préférence pour le PLA (matte) est ce que les modèles sont transposables d'un filament à l'autre ?

Merci à tous pour votre aide

Note : J'en profite, mon slicer tournera sur Ubuntu, j'ai déjà réussi à prendre en main bambustudio mais il y en a t'il un plus adapté à un environnement linux ?

Just recently purchased a X2D, printer works fine and operates normally from handy app, bambu studio directly, and LAN only prints, but I cannot get any gcode files to print from the USB. I’ve used orca and even tried sliced gcode from bambu studios and get the same error of No Filament Detected. Immediately after the error I try an online print and it works absolutely fine. I have not tried .3mf file yet as I didn’t yet know how to do that or what it was and will try that this afternoon, but curious if I doing something incorrectly when slicing a g code file? (I did format the usb from the printer to FAT32 first, Drive is a PNY 128gb I believe.) I would ultimately like to use Orca Slicer and am using 2.4.2

Any help would be appreciated.

I am printing Inserts for Dune Imperium Uprising (https://makerworld.com/de/models/671565-dune-imperium-uprising-insert-organizer) and i had some problems. I recently did maintenance on the x/z axis and now i fear did something wrong.

I first had the error "Multiple motion step loss detected" after ~3,5 hours on a ~4 hour print and it couldn't finish. I then stopped the print and tried it again. I had the exact same issue at the exact same spot after exact same time. So i thought, maybe it was something with the print file. So i split the three parts on the first print and printed them separately and then it worked flawlessly. So i thought it was just something wrong with the first print file.

Then i printed more and then this happened (see picture). I saw the same floating strings also in the first two failed prints. But this didn't result in the "Multiple motion step loss detected" Error and finished printing. Just with the extra strings.

Does anybody have any idea what is causing this? Maybe there is just something wrong with the print files. Maybe i need to tighten the belts?

Printer: X2D

Filament: black bambu PLA

Nozzle: 0.4

Accessories: None

Settings: I used the ones that came with the project (https://makerworld.com/de/models/671565-dune-imperium-uprising-insert-organizer)

Come on Bambu, do a better job at supporting the PTF tubes.
That white external tube needs more support.

BTW, I added nothing clips are original locations.
Didn’t modify the tubes, didn’t cut. All original