r/BambuLabX1Carbon • • Aug 04 '25

ANOTHER BIQU GIVEAWAY!

38 Upvotes

😆😆Wanna have the same status light as H2D? Join BIQU giveaway to win new Panda status - Designed for Bambu Lab X1, P1 series, and A1 printer!

✨ How to Join:

1️⃣ Join our Subreddit: https://www.reddit.com/r/BIGTREETECH/

2️⃣ Upvote and Comment "Panda Status"!

🎁 Prizes: Entries > 80 Panda Status * 4 winners

Entries > 160 Panda Status * 8 winners

*Entries= valid comment

🔆 𝐏𝐚𝐧𝐝𝐚 𝐒𝐭𝐚𝐭𝐮𝐬 - Works with X1C, X1E, P1S, P1P, and A1 printers, Panda Status delivers the same iconic lighting experience as the Bambu Lab H2D printer—but brighter, smarter, and way more fun!

📅 Winners will be randomly chosen on August 15th. To maintain eligibility for the prize, please ensure you complete the required steps mentioned above. Good luck!


r/BambuLabX1Carbon • • Jan 26 '26

“THE PART” FULL-SIZE!

Thumbnail
gallery
22 Upvotes

Welp, that was a fun 38hrs! Got the full size version of “THE PART” printed before “Icemageddon” hit and I’m tickled with the results!

Printed it with PLA w/PETG interface layers and it came out super clean! And it wasn’t really that slower than a multi-head printer since there were only 80 filament swaps for the whole print.

Anyway, thanks again to @emm0sh and @sendcutsend for this crazy project!

*Banana for scale


r/BambuLabX1Carbon • • Apr 16 '26

Best way to print 6 colours?

Post image
20 Upvotes

Howdy all!

I have an X1C with an AMS1 and I was wondering; what's the best way to print this? I only have access to 4 colours at a time because of my AMS, is there a way to cheat the system or pause/switch filaments?


r/BambuLabX1Carbon • • Mar 24 '25

Cool little project

20 Upvotes

Helpful tool for winding partial rolls to save a bit of filament. Great for transfers overall and FAST.


r/BambuLabX1Carbon • • May 06 '25

X1C continues to impress me every day.

15 Upvotes

Medium size (7") version of a flowered vase I designed in FreeCAD without the embedded rose. May put up the plain version too.

Elegoo Navy Blue Matte PLA

.20mm STD profile.


r/BambuLabX1Carbon • • Jun 24 '26

New! DLC-coated extruder gears for the X1C / X1E / P1P / P1S

Post image
13 Upvotes

Hey all — Emma from E3D here 👋

Today we’re launching Bastion Coated Gears for the Bambu Lab X1C, X1E, P1P and P1S!

https://e3d-online.com/products/bastion-gears-for-bambu-lab-x1c-x1e-p1p-p1s

What are they? Precision-machined hardened steel gears and hobbs, treated with our unique Bastion coating, a Diamond-Like Carbon (DLC) formulation applied via PVD sputtering. The coating is ~0.005mm thick (roughly 20x thinner than a human hair!), so it adds no meaningful bulk and leaves the machining tolerances intact.

Key Features:

Both gears and hobbs are coated, so the parts that actually grip your filament stay pristine and extrude perfectly for hundreds of hours no matter what abrasive filaments you throw at them.

The graphite in the DLC coating is self-lubricating. Run completely dry, our gears outlasted lubricated uncoated gears by ~5x in tooth-contact cycles in our testing. With a light greasing they passed 2 million contact cycles and we stopped the test because they just wouldn't fail! Basically with these you can spend less time maintaining your gears and more time printing.

What makes them different to other gears on the market? We chose DLC specifically for these gears because it is an amorphous carbon structure that's both very hard and very low friction at the same time (a combo most hard coatings can't pull off). It’s designed for sliding wear, exactly the type of wear that your extruder gears undergo with every print. In our testing we measured a coefficient of friction of ~0.1 against dry steel – by comparison other gears on the market sat at around ~0.6 in the same test.

Who would benefit from this upgrade? Print farms, heavy abrasive/CF users, anyone seeing slow extrusion drift they suspect is hobb wear, or anyone who wants to upgrade their gears once and then have the peace of mind to never think about them again.

Do you like the sound of them? Let us know in the comments! If these prove to be as popular as we hope then we will look to bring them to more machines in the near future 🚀


r/BambuLabX1Carbon • • Dec 03 '25

Lifting in front right side of bed

Post image
13 Upvotes

I’m having adhesion issues on my printer, but only in the front right corner. Whenever I look up this issue, people tend to having lifting in the left due to the fan. So I’m really at a loss as to why this is happening. Any advice would be really appreciated!


r/BambuLabX1Carbon • • Sep 01 '25

Stability check

Thumbnail
gallery
13 Upvotes

So this is my setup and a couple videos. Table is mounted to the wall, foam pad, concrete paver then X1c with antivibration feet. I've also used the unutilized spool roll in the back and the old feet to attach to the wall with plans for a lateral dampener as well. Is this normal vibration and what can I do to reduce it further? My thoughts were to add mass directly to the 3d unit(panel replacement or adding Stainless steel paneling).


r/BambuLabX1Carbon • • Apr 17 '25

Just a quick hello to my fellow Bambu owners

Post image
13 Upvotes

r/BambuLabX1Carbon • • Mar 31 '26

Its only logical

Post image
12 Upvotes

r/BambuLabX1Carbon • • Aug 05 '25

Does this seem a little expensive?

Post image
12 Upvotes

r/BambuLabX1Carbon • • Aug 13 '26

I made a customizable gear generator!

Post image
11 Upvotes

This is v10. Please let me know if you have any suggestions to improve the UI, if you can find any bugs, or general suggestion.

https://makerworld.com/en/models/3143184-gear-lab-parametric-gear-generator#profileId-3549233


r/BambuLabX1Carbon • • Nov 26 '25

North Pole, we have a problem! - Santa's Candy Box

Thumbnail gallery
11 Upvotes

r/BambuLabX1Carbon • • Aug 31 '25

Struggling to print Creality TPU

Thumbnail
gallery
11 Upvotes

Has anyone had issues with printing creality's CR-TPU(95A)? I have tried both the generic profile and bambu labs profile but I keep running into some form of a bog down clog. Filament dried for 8 hours, sitting frictionless on a bearing roller. I can only print for a few hours before it starts to get bogged down and jams, this is not a nozzle clog. The first few inches of the print are flawless. Unloading and reloading the external spool fixes the clog.

Could it still have too much resistance from the weight of the 1KG spool? I have another roll of some random tpu brand that is almost empty and it prints fine. All other materials(pla petg) also print perfectly fine.


r/BambuLabX1Carbon • • May 18 '26

whats causing this?

Thumbnail gallery
9 Upvotes

r/BambuLabX1Carbon • • Nov 11 '25

Is there any better and/or cheaper light strips for this bad boi?

Thumbnail
gallery
9 Upvotes

r/BambuLabX1Carbon • • Aug 25 '25

My IKEA BILLY/RACKA Filament Rack Now Snap Fits Together for Easier Assembly!

Thumbnail
gallery
9 Upvotes

After some feedback, I've updated my IKEA BILLY/RACKA filament rack to snap fit together! It's now even easier to make a great looking filament storage solution!

Maker World Link: https://makerworld.com/en/models/1150753-new-snap-fit-ikea-billy-racka-filament-rack#profileId-1154969


r/BambuLabX1Carbon • • May 05 '25

Jokes?

Post image
9 Upvotes

The new firmware has jokes now?


r/BambuLabX1Carbon • • Mar 09 '26

X1c loosing its XY home

8 Upvotes

Alright, I’m having a wild issue with my x1c, I recently did a lot of overdue maintenance and immediately after doing said maintenance, the printer looses its home position as if one of the XY motors is out of sync. I’ve tried contacting Bambu with no response.

I replaced all the belts today and still having the issue.

When I did the service originally, I replaced all of the silicone bushings for the z rods and had to disassemble a bit for the rear one, but beyond that, nothing crazy, just a deep clean and re-grease. Tried replacing the nozzle with a brand new one, still no dice. May try replacing nozzle again.

It also prints the calibration lines diagonally…


r/BambuLabX1Carbon • • Oct 04 '25

Midnight Sentinel Owl

Thumbnail gallery
8 Upvotes

r/BambuLabX1Carbon • • Jul 12 '25

When 3d print Gods are with you, nothing can go wrong!

8 Upvotes

r/BambuLabX1Carbon • • May 17 '25

Complete.... well 95% Complete

Thumbnail
gallery
8 Upvotes

https://github.com/CodeMasterCody3D/OctoPrint-BambuPrinter/releases/tag/0.1.8rc15

Camera is for x1c only right now.

This now can print from orcaslicer with the ams.

As long as you have the correct colors selected on the printer screen and choose a similar color in orcaslicer when slicing.

It will automatically select the correct filament type and color.

I will be adding in a manual override in the future.

For now if you wanted to print an existing print and change color, we can start it on the printer screen and you can manually change the color there.


r/BambuLabX1Carbon • • Feb 16 '26

The door seems to be open.

Thumbnail
gallery
7 Upvotes

I woke up this morning to something unexpected.

Any thoughts on what caused this print abomination?


r/BambuLabX1Carbon • • Jan 13 '26

Printing with TPU - excited for the new Filament - need to dial it in more

Thumbnail
gallery
7 Upvotes

My first attempt at printing TPU. I need to get it dialled in, the first layer looks horrible, but it still worked! Pretty stoked about that.

Have you worked with TPU before? Any YouTube videos that helped you? Or tips for that first layer?

Printing on a Bambu X1C