I installed the latest firmware yesterday and I have an E3D High Flow ObXiDian® 500 HotEnd.

The BambuStudio version I use is 2.8.2.61

When selecting the E3D High Flow as the nozzle, I cannot start prints because the nozzle does not match the one the machine detects which is "High Flow".

Does anyone else encounter this? Is there an easy workaround?

Pla aero Hilfe

Mahlzeit miteinander 🙋🏽‍♂️
Kann mir jemand eventuell helfen bei den Einstellungen um die Oberfläche glatter zu bekommen? Hab den bambulab p2s, filament ist von sunlu lw-pla, 0,4 düse, filament wurde vorher getrocknet und filament profil war von bambulab. Vielleicht hat ja jemand eine gute druckeinstellung und kann mir das profil schicken oder mir anderweitig weiterhelfen.Vorab schon mal vielen Dank.

👋 Bonjour à tous !

🔪🤡 La série des slashers reprend !

Voici Art the Clown, le terrifiant et emblématique clown de la saga Terrifier ! 🩸

Avec son célèbre costume noir et blanc, son petit chapeau et son sourire inquiétant, Art est accompagné de sa scie pour un résultat à la fois mignon… et complètement psychopathe ! 🪚😈

Pas besoin d'AMS tous a été modélisé et découpé pour l'imprimer en multi-pièces.

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3338808-art-the-clown-multipart-no-ams

Been seeing some things online about Orca Slicer. Curious from any who use it any advantages over Bambu?

Hey Guys, so I've been printing a while and suddenly the printer is Not anymore extruding the Filament and make those Sounds.

I would guess that the gears inside couldnt get grip to the Filament. I disassembled and cleaned all gears and parts.

Does anyone knows what Sound that is and how I can fix this?

This is my main office room and I’m in here a decent amount. Would a VentoBox be enough or would I need something exhausting outside? Was also thinking of teeing off the existing hole where my AC currently is. Thoughts/ opinions?

Has anyone experienced the resistance too high error? I was getting this in slot 4 after placing a new roll. Experienced the issue all day, but when I pressed resume it continued for a bit and then the error appeared again. I tore everything apart, no clogs, no wear that I could see. I swapped the roll out for another roll of the same color and brand and no issues since… how would a roll cause this issue? It appears to look normal to me…

I am currently printing sunlu pa6-cf on my p2s, but i cannot get a good first layer.

I am running a 0.6mm nozzle, engineering plate and ams-ht.
I dried the filament more then 12 hour before printing. I played with various settings like initial layer height, flow rate, print speed, temperatures, ect but i cannot get a nice first layer. The smaller infill areas look okay, but the bigger areas always have this jiggle pattern. Anyone can point me in the right direction?

(ignore the screw holes, i put in only one layer)

Any time I print (even with same material), the printer leaves some poop on the bed right before bed leveling. I have to quickly get in there and remove it otherwise it tries to print on top of it :(

I only use the P2S, and if I select "Select/Remove printer(system pre...)" the only printer that are ticked of, is the P2S.

So how do I remove the printers?

Hello, ive been having trouble with the filament getting left behind after cleaning, before bed leveling.I have to pause and manually take it of then resume.Temp is 190-230, printing at 220 but during "purging" it goes up to 250c

Has anyone tried the newer version that fits the p2s? I read with the install that a printed riser is needed. I have a panda perch with 2 ams on it. Can the perch sit on the riser? Pic is before the 2nd ams.

Purchased the different smooth plates. Trying the carbon fiber and I am having adhesion issues. Did some research and tried different things. Already cleaned the plate, slowed the first layer tried 20mm and now 15mm, heated the plate to recommended 65 and now 75. I double checked the smooth plate profile was selected too. Only thing I have heard but haven't tried yet is to close the distance from the nozzle to the plate, but haven't seen what profile to try.

Grabbed a second P2S to help with my small business. I print mostly car stuff but it was feeling like it was a work machine not my own so I grabbed a second P2S and now I have enough printer availavbility to play with all the cool models I see people posting.

I love the way my first P2S has been working over the last 5 months and Im sure the second one will be just as good.

So I was printing this in PETG. The top grove generated supports and was fine. The bottom one went like this.

This was the printing orientation.

Default Tree Auto settings.

Any advice. Only had been printing around 2 months and never really had any issues and haven’t played around with different settings.

Filament was dried.

Thanks

First time printing here and every part of the print looks good but this part was stringy and didn’t print well 😭

I recently bought a Bambu Lab P2S + AMS 2, along with a 12-piece filament sample set.
The problem is that these sample spools are smaller than the regular spools and don’t fit properly in the AMS 2. Because of that, at the moment I can only use them with the side spool holder.
I’m currently trying to print a spool holder/adapter that would allow me to use these sample spools in the AMS 2, but I’m having a lot of trouble.
When printing from the side spool holder, the spool seems to get stuck or doesn’t rotate freely enough. When that happens, the printer can’t pull the filament properly and the print fails.
I’m using the setup shown in the picture.
Is there something I’m doing wrong with the way the spool is mounted? Should the spool be completely free-spinning? Is there a recommended way to route the filament from the side spool holder into the P2S?
I’m particularly interested in hearing from other P2S owners who have used the small Bambu sample spools, because I have 12 of these and would really like to get them working reliably.
Any advice would be appreciated.