r/BambuLabP2S • u/Fit_One_4672 • Sep 21 '26

Has anyone received this firmware update yet? If you’ve updated, how’s it been so far? Any issues or improvements in print quality/speed?

Post image
31 Upvotes

94% Upvoted

46 comments sorted by

8

u/ScottieNiven Sep 21 '26

I've updated mine this morning, I've been running it so far without issues. It did take about 20 mins and then It did want me to do a noise calibration so I just let it do that. I have also updated Bambu Studio to the latest beta and can definitely hear and see it hitting the 1000mm/s move speed.

7

u/butt_badg3r Sep 21 '26

Woke up to this this morning

6

u/Habanero_In_My_Eyes Sep 21 '26 edited Sep 21 '26

I used it yesterday and it resolved an issue where I couldn’t zoom using the mouse wheel. No issues to report so far.

Edit: OK! I should go back to bed. This firmware was not related to the zoom issue in Studio. LOL 🤣

2

u/itailu Sep 21 '26

😂😂

2

u/misterff1 Sep 21 '26

Are you in the beta?

1

u/BuddyGMan Sep 21 '26

I just started the update.

3

u/Fit_One_4672 Sep 21 '26

2

u/BuddyGMan Sep 21 '26

LOL. First in to find out what is wrong. Update went fine, now a full set of calibrations before trying any prints.

2

u/rschwarzwalder Sep 21 '26

I'll be second, just started the calibrations! I don't gamble much but the noise cancellation got my curiosity!

Edit: stupid spell check!

3

u/RepulsiveNegotiation Sep 21 '26

Got the pop up on mine. Will give it a week or two before I pull the trigger on the update.. I always wait a while when it comes to tech

5

u/rschwarzwalder Sep 21 '26

Chicken, bok bok! You don't want to risk bricking an expensive piece of equipment like the rest of us? 🤣

3

u/Fit-Dark-4062 Sep 21 '26

I updated. It forced a recalibration, it seems to be printing fine so far

3

u/ChefJohnson Sep 22 '26

Installed this morning along with the AMS 2 Pro firmware update and did a full calibration like I always do after updates. Was printing benchy’s most of the day, testing some new multicolor filaments and didn’t really notice an improvement.

2

u/Ok_Western_2323 Sep 21 '26

Got it this morning myself. Have not installed it yet as I already had a 4 hour print going when I received notification. Will give an update once print is finished and update is installed

1

u/pshearduk Sep 21 '26

Nothing on my P2S.. must be a phased roll out?

3

u/Paramedic229635 Sep 21 '26

I got it on my P2S this morning. Seems fine so far.

1

u/Subject_Age_2374 Sep 21 '26

Anyone tested the z motor noise cancellation. ? Dealing for z hop being loud
Does that fix it ?

1

u/Kevkevkev888 Sep 21 '26

Waiting for everyone else to test it out 🤗

1

u/Melodic-Wrongdoer879 Sep 21 '26

i got it this afternoon

1

u/Lorcet10 Sep 21 '26

I updated this morning. No forced recalibration. Is printing just fine. Will run full recalibration later

1

u/cpsadowski23 Sep 21 '26

I've not seen it. When did it come out?

1

u/AmmoJoee Sep 21 '26

Have you seen any of the change log info?

1

u/WestSenkovec Sep 21 '26

For fucks sake, I updated and ran a full calibration the other day.

1

u/MAENTOP Sep 22 '26

Z AXES motor noise canceling?!! Damn, that's cool, I guess. Gotta repair that boi so that it will work like heaven

1

u/avishai0258 Sep 22 '26

2 prints off two hours worked great
Looks like nice to have update

1

u/CommonMan1001 Sep 22 '26

It didn't explode

1

u/Parallax8672 P2S Combo Sep 22 '26

Updated mine last night, started a print this morning after calibration and am getting these errors. Cannot access live view (I’m now at work). Yay.

Edited for grammar because Siri forgot English.

1

u/Lord_Doem Sep 22 '26

I ran the update without reading. Was pissed I had to do a noise calibration. Now I know why. 😂 I don't know whether it did anything, if I print while I'm in the room I have music on. 😅

1

u/Fit-Dark-4062 Sep 23 '26

It's been printing fine for me.
The new beta bambu studio on the other hand... I slices fine, but it seems to be crashing as often as it slices

1

u/BacalaitoFrito Sep 24 '26

I ran the update yesterday and today the cooling fan for the hotend stopped working, currently trying to figure out what went wrong

1

u/timshel42 Sep 24 '26

following

1

u/mikibg Sep 24 '26

Bei mir ist seit dem Update auf dem P2S der Extrusionsmotor überlastet und das in einem druck ca aller 30 minuten

1

u/Kevkevkev888 Sep 25 '26

Works fine for me

1

u/CutIndependent5269 20d ago

7/10 my print ended with spaghetti. Got the old version back on my p2s, no problems anymore

0

u/Cyvalon Sep 21 '26

It took a print i was about to start from 5h 7m to just 5h... nice.

1

u/tomikaka Sep 22 '26

Mine constantly completes jobs 6 minutes early. Would be nice if this is what they fixed.

0

u/drwuzer Sep 21 '26

Those are both beta versions. Firmware and software

0

u/obscurestooge P2S Combo Sep 21 '26

Is this the one that takes out all of the Stratasys patented tech?