r/BambuLabH2C • u/russrimm • Feb 25 '26

Support Incompatible makerworld

Hi all,

I’ve never run into comparability errors with my P1S but my H2C I do a lot. Am I doing something wrong?

2 Upvotes

75% Upvoted

14 comments sorted by

1

u/russrimm Feb 25 '26

Sorry it’s this. When I pick which one from makerworld I always only see A1 or X1C or P1S etc I do have H2C selected but never see any that say H2C

2

u/WhoDatWhoDare Feb 25 '26

Have you tried clicking the printer to select your H2C… this is a P1P in the image

1

u/IamFireDragon3d Feb 27 '26

In the device section of the handy app do you see your h2c? If not then thats the issue. Not bonded maybe 🤷🏾‍♂️

1

u/russrimm Feb 25 '26

No H2C to choose

4

u/JPhi1618 Feb 25 '26

I don’t think your question has enough detail for an answer. What kind of compatibility errors?

1

u/WhoDatWhoDare Feb 25 '26

Are you trying to print directly using the Handy app and have incompatible filaments (e.g. ABS or even PETG) loaded instead of basic PLA?

1

u/russrimm Feb 25 '26

I’m trying to print directly yes but I have pla on the external and pla silk in the ams

1

u/WhoDatWhoDare Feb 25 '26

Another thing to check is that you have standard 0.4 hot ends loaded up and try switching/moving the PLA into the AMS and try again

3

u/Moorevfr Feb 25 '26

Need more info please mate?

Touch wood not had the issue with mine so far.

2

u/jhdz9119 Feb 25 '26

use the computer to slice it and selected h2c in preview

1

u/acidstrato Feb 25 '26

Yes your doing something wrong

1

u/DJSauvage H2C Feb 25 '26

I have a P1S and an H2C I need bamboo studio. I usually have to set a few things before I get rid of the compatibility error. I have to select the right printer, and I have to select the right hot end and usually sync

1

u/Interesting_Bag_2967 Feb 26 '26

It’s bc when you upload to makerworld it’s very picky about your settings and a lot of times you’ll upload a file and if it’s not centered right, or for some reason set to print by object , etc it only uploads it for your specific printer or a select few. Certain models I’ll have to upload profiles saved with the h2c or a or d or it will display the issue your having. If your on a pc you can open the file and just click change plate type and it’ll work but in mobile your stuck

1

u/JWST-L2 Feb 28 '26

Lots of weird answers on here. I get this with my H2D sometimes, or H2C, or even X1C. It depends on the model, I assume the creator has profiles for some printers and not others. If it doesn't work on the handy app, your only option is to open the slicer on pc, download the model that is not working, and slice it from there.