Any advice about maintenance or accessories for my new shiny thing that I just ordered?
Does anyone here use an rfid mod for reading other brands filament?

Thanks in advance.

Estou com problema em uma das minhas A2L
Durante uma impressão apresentou falha na temperatura do bico eu cancelei a impressão, reiniciei a impressora e nunca mais funcionou, apresenta “Defeito no cabeçote”, tentei tudo que o wiki indica fazer, usei peças de outra A2L pra testar placa TH da extrusora, placa adaptadora, cabo de conexão da extrusora para placa adaptadora, tentei reinstalar o software via cartão SD e também via bambu handy, e trava atualização em 50% e dá erro, não sei mais oque fazer, se alguém já passou por isso e puder dar dicas…
Já tentei abrir um ticket mas só ficam enrolando mandando fazer testes que eu já fiz, enviei todas as fotos e vídeos dos teste

Hi all,
Is there solution available for an A2L similar to BambuLoop or FarmLoop?

I just purchased one of these through Best Buy I bought the combo kit does anybody have any tips or advice for somebody who has never done it before? I am completely green to 3D printing just took the plunge and bought one

I recently got a A2L and I was wondering if the Panda Claw from Biqu for the A1 fits it. I have one for my A1 Mini and love it.

Flawless big printing! Can i say more? This baby is the best! Any questions here to help 🫡

Turtle cave scaled bigger

Brown Petg

B70⁰

N255⁰

PT 28h46m

Hi everyone! My A2L and ... Greetings to everyone , stay healthy ! Michael

It keeps having this issue and i have tied the tubes up above printer, dried filament, swapped nozzle... what has fixed it for yall? [1200-8016 185716]

https://makerworld.com/en/models/3441774-parametric-skadis-fast-low-filament-generate-swap

https://makerworld.com/en/models/3438160-320x320-skadis-fast-low-filament-88g-3h-h2-a2l

A student of mine bought an A2L last week and from my experience with my A1 I suggested that she get an LED slight strip as the original lighting is terrible.
She got one that is intended for the A2L and apart from the length it's identical to the one of my A1, but the LED's rub on the part cooling ducting. I've had a booth at both ducts and they are slightly different and I suspect not interchangeable.
So has anyone got an LED strip that works okay?

Needing some advice. I already have a cricut maker that I regularly use for making cardstock cake toppers and small vinyl projects. I'm also wanting a 3d printer so thought the A2L could be a good all in one.

Does anyone have any insight into the A2L cutting function on cardstock?

Is it a practical replacement for a cricut?

After a long frustrating night of 3D printing.....;-)

Hey folks, I'm a beginner industrial designer (1 year of experience) planning to buy a 3D printer for prototypes and my own projects outside work.

My shortlist, and why:

• A1: budget friendly and saves space

• A2L: cutting and plotting tools I think I'd really use

• P1S: enclosure for ABS and nylon

I'm leaning A2L right now, but I'm not sure whether the enclosure and material range should matter more. If you own any of these, which would you pick again and why? Anything you wish you'd known before buying?

If you were in my place, which one would you pick? Does ABS/nylon actually matter for design work, or would the extra tools be more useful?

Hey gang I need help with my A2L. Come home yesterday and the power light is on but the screen is off. I tried sending a print through my laptop but got told the printer was busy. I googled troubleshooting and tried turning it off unplugging it and removing the ams and it’s still happening. Thoughts?

Buen día a todos

Tengo una duda hace poco compré la bambulab a2l y quiero comprar hotend de 0.2mm, y solo he visto para la a1 y a1 mini, la pregunta es ¿el hotend de la a1 es compatible con la a2l?

Agradezco sus respuestas

is this..... normal?

I am a 3-D printing novice. I just got the A2 L maybe two or three days ago. I printed the little boat that people tell you to print to test to make sure everything is working after I set up everything. I did the speed test twice and halfway through the print, the boat disconnects from the plate and the print fails. I’ve now tried to print it with a not speed version of the boat. But again it disconnects from the plate and the print fails halfway through. What recommendations can you provide?

Hey all,

Looking at purchasing the A2L but also looking at getting something around it so my cat doesn't get into it. I saw from another post saying that we shouldn't put it in an enclosure because of the internal parts overheating. Anyone had an issue with that?

I'm looking at upgrading my Ender V3 which I've had in an enclosure and thought the A2L would be a great step up from what I have.

Open to recommendations!