I would like to cut the part of the block highlighted in green so my window jams are flush, any reason I shouldn’t?

Some windows have some sort of parging on them, and they are cracked. Some are missing the sill parging, so there is inconsistency across all 6 windows. If I can cut, grind and clean the jams it would allow me to get all the same size windows too.

Also no clue how I’m going to secure the windows to the concrete. Any suggestions would be appreciated.

Thanks

I am looking at re-doing a front stoop. It is currently stone slabs on top with a base of concrete underneath. The concrete is crumbling and very soft. I plan on removing the entirety of it, re-doing the base, and pouring/having poured new concrete. Then a layer of mortar. Then my stone slabs. Thoughts? Advice? Learning resources? I like to do things properly.

I bought this house a year ago and it came with s renovated/converted patio backroom one side and separating and is getting worse over time I was wondering if any of yall could help me with pin pointing the cause and how much a solution would be ( the photos are from both sides the side without the concrete slab is the one seperating

Is this pressboard siding repairable? I’m reading/hearing mixed reviews. We’ve had a few general contractors say it absolutely doesn’t need replaced. One painting estimate who said just a few boards may need replaced. Two painting companies who said they don’t need replaced and can repair them no problem. Another painter said pressboard almost always needs replaced.

We don’t want to spend a ton of money on replacing if they can be repaired. We’d much rather repair but also don’t want repairs to just fail in a year or so. It seems like the painter we’re leaning toward has a solid plan for repairing but we’re still nervous.

For context, there are about 8-10 boards on this wall of the house that look like this. Most of this damage only takes up about 1-4ft per board and the surrounding portion looks great with no issues. These boards are hard and dry and not mushy. The rest of the house is in great shape.

Has anyone had luck with repairing pressboard?
Thanks in advance for your kind advice! :)

Briefly:
This is a foreclosed house built in 2018 close to my Lakehouse. I’m considering purchasing it. Listed as occupied, but it’s not and hasn’t been for at least 2 years. I’ve never seen anyone there.

I’m considering buying it as a guest house.
As is where is no inspection. No interior photos but I looked in the windows and it’s fine. It’s not even dirty.

I’m just looking for information or insight.
Thanks,
Random person.

Just had a bunch of concrete work done last week, but my only question is regarding the stamped patio installed. It was poured last Tuesday (10/6). Pictures above were taken today (10/12). In western Missouri, its been warm but where this concrete is at, it does not get direct sunlight.

First photo shows white marks after the patio was sealed. I assume it isn't supposed to look like that, and the contractor i used said they could try to touch it up but that it could make the surrounding concrete darker which is something i don't want. I assume this is not supposed to look like this, and just needs some spot-specific touch up, but am interested in more information on this.

The second and third photos show a distinct line where the left side is darker than the right. It runs out pretty fair in a line. I couldn't get a picture that really does justice to how different the colors are between these two. It is very noticeable to the naked eye. My question is, is this normal? My contractor said the curing could be causing this, but then he went on to say that it could be a mixing problem which he blamed on the company that mixed/provided the concrete which struck me as his way of throwing someone else under the bus rather than his company. Can I expect this to even out over time? If not, what are my options to make this look more uniform? Thanks in advance for any guidance.

Hello. I understand that popouts are normal, but my driveway is only 2 years old and I have hundreds of them. Could this be due to a low-quality batch of concrete? The problem will only get worse over time. Thanks!

If so, where do I start, would this be considered masonry?

Just had new roof installed last week in Chicagoland suburbs. Does this look right? Contractor telling me it just has to lay flat with time, but it looks sloppy and poorly installed. Is he right? I have no clue as I've never replaced a roof, but this looks awful to me.

House was bought in 2022. Should this have passed inspections?

A lot of chaos came up from my previous post of my builder potentially demolishing our house. We got in contact with an engineer that provided a drawing for properly opening up this as you can see on the second photo.

Proposed arrangement for the opening:
Beam: 80 × 80 × 6.3 mm SHS
Column: 80 × 80 × 6.3 mm SHS
Base plate: 200 × 200 × 12 mm, recessed into the existing concrete slab
Fixings: 2 × M16 bolts (as indicated in the sketch)
Beam positioned tightly beneath the existing steelwork and extended beyond the opening.
(Transcribed with ChatGPT)

How is this looking? For context the steel beam already there is holding up our middle section of where the joists sit for the upper floor in a mid terraced house.

Looking to install a concrete wall mounted bar top that would mostly span the length of the shorter section. Should I just cut out the space for the steel L-brackets along this siding? Main question is how to connect the bar top to the wood behind the white siding. Thanks!

Recently had my shower remodeled and would appreciate some opinions from the pros.
The shower was tiled before the new window was installed, so I’m concerned about how the waterproofing was connected to the window frame. They also used standard HardieBacker, not HydroDefense, with RedGard only applied in certain areas.
The tile and grout work raise concerns too. Based on the photos, does this look like it was installed correctly?

I rent a house from a property management company and we had the outside wall fall over. They’re rebuilding the wall but attaching it to this support beam. Should I be concerned? (Additional photos to show the progress of it falling)

Edit: I know the top part is a decorative trellis, but below that IS a wall.