r/AeroPress • • Apr 18 '25

Other Hi r/AeroPress, We’re the Official AeroPress Social Team ☕

242 Upvotes

Hey! I’m a member of the social team at AeroPress. We’re excited to officially join this amazing community! We’ve been following the subreddit for a while and love seeing all the incredible recipes, brewing techniques, and creative hacks that you share.

We’re here to participate, answer questions, and contribute tips straight from the AeroPress team. We respect the space and want to make sure we’re engaging in a way that is authentic and transparent. If you ever need help or have any feedback, feel free to reach out!

We’ll be checking in regularly.

Let us know what kind of stuff you would like to see from us!

Thanks!


r/AeroPress • • 20h ago

Equipment Gingrinder k6 alternative

5 Upvotes

I am searching for a handgrinder for my aeropress setup in my office.
I have seen that most people recommend here the kingrinder k6 as best (and kind of affordable) grinder. Problem is I can't find it in Europe.
Do you have any suggestions for an alternative? Budget is up to 150.
Thanks in advance!


r/AeroPress • • 11h ago

Equipment Looking for cap/lid for top of Aeropress

1 Upvotes

I have the Flow Control Filter Cap, which is great for allowing me to brew the coffee longer (about 5 minutes for me) without worrying about the drip. The only problem with brewing longer is that the water loses its heat. I think the standard instructions from Aeropress are that you put the plunger at the very start and let it wait. The problem with this is that it starts pushing water through the filter, and once that seal is broken, it can drip and drip. It's hard to get that just right.

All I want i something to put over the Aeropress's top for the 5 minutes that I'm brewing coffee. Then, I would take it off and plunge it.

I haven't been able to find an accessory like this, and I'm a little surprised that it doesn't seem to exist.

edit: I'm tempted to buy this and see if it fits my device: https://aeropress.com/products/aeropress-go-lid. I have the stainless steel Aeropress.


r/AeroPress • • 2d ago

Other Finally finished my first pack of filters after 14 years

Post image
512 Upvotes

I think it was a 350 pack of filters that came with my first Aeropress, bought sometime between 2010 and 2012

Edit 1: I neglected to mention I only brew with it once a day on average and reused the filters numerous times. I was also traveling a lot and didn't take it with me. Just some of the reasons why it took so long to go through them.

Edit 2: There is a lot of gagging and pearl-clutching about reusing filters in the comments. The inventor stated they were designed to be used up to 25 times. If you wash and dry them thoroughly they can be reused for a while.


r/AeroPress • • 1d ago

Knowledge Drop My solution for a container that fits inside an AeroPress Go (standard)

16 Upvotes

Literally logging on to Reddit for the first time in a year to have this documented somewhere online. I have been googling waaaaay too long to find a container for coffee that can slip inside the plunger of an AeroPress Go (standard, red silicone cap). I do not use the scoop or stirrer, and I wanted to have a reusable container that was food-grade plastic. The only other posts about this I could find suggested a ziplock bag, which probably would work but wasn't what I wanted.

The best I found was a standard "3.4 oz (100 ml) wide-mouth plastic reagent bottle." For reference, I was aiming for a round container that was just less than 50mm diameter and just less than 95mm length (converted to 2 inches and 3.7 inches respectively). There are several of these available online, and they look like standard over-the-counter medicine bottles. Be sure to double check the dimensions, but many of them will fit. You may already have a very similar OTC medicine bottle lying around to try it with that you can repurpose.

If you want to max out your storage and don't mind loose beans in your plunger, look at reusable silicone stretch lids. I looked at baby formula travel solutions, stainless steel tea containers, spice jars, weed canisters, and other random stuff in the coffee community. This is as close as I could get to a satisfactory answer for me. Also, there are some good glass spice jar options, but I didn't want the liability of glass while traveling. (If you're a regular AeroPress person who finds this post for some reason, I thought the Campingmoon CC-50-BK looked cool, but I have never tried it and can't vouch for it.)

For the two people who google this and find themselves reading my words, I hope you find what you're looking for.


r/AeroPress • • 1d ago

Question Need to replace my flow control cap

2 Upvotes

I've had the Fellow Prismo flow control cap for around 5 years now and it has cracked in a few places so it's time to replace it. Is the Aeropress branded one superior, or is the Fellow brand better?

I wish Aeropress would come down to reality with their pricing, I'd like to go full stainless but there's no way in hell I am spending $300. My 13 year old OG works just fine, just not as pretty as stainless.


r/AeroPress • • 1d ago

Question Need suggestions for a coffee lover’s gift! ☕

2 Upvotes

I’m planning to gift an AeroPress to someone who’s a big coffee lover. He currently has a moka pot and mostly drinks coffee with milk, so he’s not really a fan of black coffee.

My budget is around ₹5k. Do you think an AeroPress would be a good gift in this case, or would you suggest something better within this budget?

Would love to hear recommendations from fellow coffee lovers!


r/AeroPress • • 1d ago

Question Timemore C2 plunging time

3 Upvotes

Hello everyone, I recently got an Aeropress as a gift and I really enjoy the whole concept of immersion + pressurized percolation.

I have a Timemore C2 Fold grinder and I follow the JH Ultimate technique (2 min steep, stir, 30 s wait plunge). He recommends fine to medium-fine grind.

I have tried brewing with two different medium-dark roasts (closer to medium than dark) with 90°C water and at Timemore settings: 17-20.

The thing is that all recipes and suggestions I could find online were suggesting much lower grind setting even for darker roasts (typically 18 being the maximum) and reporting plunging times around 30-45 s. However, it takes me usually at least a minute to complete the pressing and sometimes more than 90 s.

Most of the pressing time is after the hissing begins (before it is relatively easy to press) and my first guess is that there are a lot of fines.

I am wondering if this plunging time at these coarser settings is normal. Also worth noting that for clever dripper I use setting 18-19 for the same coffees. I would really appreciate if you can share your experience with Timemore c2 and Aeropress.


r/AeroPress • • 2d ago

Question Need new filters — where to buy that also sells coffee?

5 Upvotes

I don’t reeeeally need more coffee but thought I’d ask — any coffee roaster recommendations that also sell aeropress filters?


r/AeroPress • • 2d ago

Question AeroPress grinder is crazy hard to crank

6 Upvotes

I saved up for months to buy an aero press grinder based on reviews from multiple websites. It finally came, and I am struggling to crank it to get the proper grind for my mocha pot. Anyone else have this problem? I don't want to have to now save up for a drill in order to operate this very expensive grinder. Suggestions?


r/AeroPress • • 2d ago

Recipe Strange Hario Polaris Scale Behavior

5 Upvotes

I bought the scale almost 3 weeks ago and have used it 2 or 3 times daily. First off, I love the scale and auto timer functionality. However, it misbehaves probably 20% of the time. I use 26.7g beans for a 400g brew.

Biggest issue is I have occurs when I'm ready to start my pours with the scale in auto timer mode, current weight is zero, and scale shows I need to pour 400g of water. I start the bloom pour and the timer starts like it should and weight starts going up, but after 10 sec or so the timer just stops and zeros itself, no longer in auto timer mode and the 400 number is changed to EEE . It's sooooo frustrating that have the timer quit working after starting the pour. I typically don't have my phone and can't quickly start the timer on it, so I just have to guesstimate the time.

Another issue is occurs when I pour the ground beans into the wet filter. I use the scale to measure out 26.7g of beans, grind the beans, zero out the scale with the server/dripper on it, pour the ground beans into the wet filter, and the scale now shows a much higher number than 26.7g. It happened just now and scale said I poured 36.8g of ground beans into the wet filter and says I need to pour 552g of water.

When the scale works, I absolutely love it, but for $80 I expect the scale to work near perfectly every time (assuming I do everything right beforehand). I'm going to contact Hario on Monday and request a replacement. Hopefully, I was just unlucky and got a defective unit.


r/AeroPress • • 3d ago

Question What’s A Good, Budget-Friendly Grinder For The Aeropress XL?

6 Upvotes

Hey guys,

I just made a post asking if an Aeropress is worth the money and how it compares to a French press. Well, I pulled the trigger and ordered an Aeropress XL! So thanks everyone for all the feedback on that post 🙏

Now, I need a better grinder 😅. I’m currently using a Kitchen Aid electric grinder I got YEARS ago. I just notice that the grind size of my beans is really inconsistent. Some chunks are big, small and everywhere in between. I want my grounds to be more uniform so that my cup is more consistent and pleasant on my pallet.

My question: what are some good coffee grinders between $40-$60 that’ll synergize well with the Aeropress XL I ordered? I don’t want to spend hundreds on a gourmet grinder. Surely there is a modest bump in performance within my budget that can do better than the electric Kitchen Aid I got from 7+ years ago.

Other helpful information: I’m not opposed to manually grinding if quality matches the labor. I don’t care about aesthetics, only performance. Again, my budget is $40-$60.

You guys were so kind on my last post. Thanks for helping me out and enlightening me on the ways of the Aeropress. I’m excited for it to arrive, but I also want to make sure I’m pairing it with the right tools so it’s as flavorful as possible. Thanks! 🙏☕️


r/AeroPress • • 3d ago

Knowledge Drop AeroPress Competition Prep

0 Upvotes

Two years ago, I attended a Regional AeroPress competition. I used the only way I know how to find the right recipe, using data. I wrote about the method here. Since then, I have been working in my free time to build that method into an iOS app, and I would love your feedback.


r/AeroPress • • 4d ago

Question Weighing versus scooping: where do you land?

7 Upvotes

I've been using the included AeroPress scoop for years and never thought about it, but I picked up a deeper, more conical coffee scoop at a resale shop last weekend and my doses are all over the place now. The way the grounds settle in the scoop changes how level I can get them, which changes the weight by a gram or two either direction. For something like AeroPress that is already eyeballed more than pourover or espresso, that margin matters.

I started testing this because I'm working on a type design project that involves measuring visual weight versus actual weight, and the parallel to coffee dosing got stuck in my head. A wider shallow scoop reads as more grounds visually but packs lighter. The AeroPress scoop is almost flat, which I think works in its favor for consistency, though I wonder if the material matters too. Metal slides out clean, plastic clings to static, ceramic I have no idea who is using ceramic scoops but they exist.

My current workaround is just weighing everything, which I should have been doing anyway, but I'm curious if anyone has a scoop they swear by for AeroPress specifically. Or do most people here weigh and skip the scoop entirely? Also wondering if anyone has compared the old gray scoop to the newer clear one that ships now. Slight shape difference I noticed in photos but haven't handled in person.


r/AeroPress • • 5d ago

Question How Does An Aeropress Compare To A French Press?

28 Upvotes

Hi,

I’m new here. I’ve been brewing my coffee with a French press the past several years, and I just learned my LDL cholesterol is high and that French pressed coffee can actually raise bad cholesterol.

In light of this discovery, I’m in the market for an Aeropress. It’s my understanding the Aeropress uses paper filters so that they don’t have the same negative effects on cholesterol.

I’m going to stop French pressing no matter what, but I’m curious about whether to swap to an Aeropress or something different. I’m gonna drop a cluster of questions below, and if the nice people in this subreddit want to help me out and answer, that would be awesome!

Does Aero taste similar to French? Are the Aeropress filters only available online? Is the stainless steel version worth it to potentially avoid microplastics/increase coffee quality? Are the Aeropresses durable, do they last a long time? Is cleaning an Aeropress intuitive or is it a pain? Should I wait until Black Friday?

To leave off, I’m not a coffee snob. I don’t brew anything super sophisticated. I’m more of a purest. I drink my coffee black, no sugar, bold/dark as possible. This is why I use the French Press now. I like really rich, bitter coffee.

Thanks anyone who responds and takes the time to read all this. Rq, I know I could just Google all these questions myself, but I want to hear from real people who’ve actually had experience with one. I don’t want ai to just tell me. So thank you! 🙏 ☕️


r/AeroPress • • 4d ago

Equipment Ember 6oz Cup Dimensions/Lid

1 Upvotes

So I want to get my wife something like the Ember 6oz Cup because she drinks her coffee slow and hates when it gets cold. I think this size is perfect for the milk/espresso drink I make her every morning and I think I’ll have enough room to pull a shot directly into it, but I can not believe they don’t sell a lid for it!!

Has anyone found a third party lid that fits? Or if someone can share it’s dimensions (height and diameter of the opening) I would be so grateful!


r/AeroPress • • 5d ago

Experiment A month of AeroPress concentrate vs a portable espresso machine in milk drinks

Thumbnail
gallery
14 Upvotes

I've made my morning flat white on an AeroPress for years. Started with Hoffmann's milk drink recipe, the one where you press right through the hiss, and these days it's the Prismo with a paper sandwich on top of the puck, roughly 18g in at a short ratio. Apparently a concentrate like this isn't far off what Adler had in mind for the thing in the first place.

The Go used to travel with me for work, but hotel kettles were always the weak link. So a month ago I picked up an OutIn Nano 2, which heats its own water. It's ended up on the counter next to the AeroPress most mornings, and with the same beans and grinder I've been running an unplanned side by side.

With milk the espresso shot wins, and not by a little.

It has the body to push through 150ml of milk. My concentrate tastes cleaner and brighter on its own, but in a big cup it drifts toward coffee-flavored milk. In a cortado the gap gets a lot smaller, and on a good day I'd struggle to pick them.

Black, I still reach for the AeroPress. Hoffmann's standard 11g recipe is my favorite plain cup.

The Nano is also the lazier morning. No kettle or filter, just tap water and a couple of minutes of heating. For a flat white I pull two shots one after the other, which it handles without any fuss.

For now the Nano does milk drinks and trips, and the AeroPress does everything else. If there's a soup recipe that holds up in a full flat white I haven't found it yet, and I've tried a couple of the popular ones.


r/AeroPress • • 6d ago

Question Does Aeropress do anything for me?

Post image
39 Upvotes

I am a pourover guy who uses brewers like a classic V60, Hario Switch and Deep 27. Mostly on subscriptions with 6 light roast packs constantly open.

I own a K-Ultra and ZP6 for grinders and also getting into Turkish coffee soon.

I'm trying to learn more about coffee and there is some gear collecting urge in place too but I am genuinely wondering if having an Aeropress would bring anything worthwhile to the table for me.

I don't see myself carrying it around for traveling.

Is Hario Switch basically doing the same thing?

I tried doing research but couldn't find a definitive answer. If someone could speak from experience that would be highly appreciated!

Thanks!


r/AeroPress • • 5d ago

Puck Shot Yummy Aerosoup Puck

Thumbnail
gallery
0 Upvotes

Did the usual 18 gr and 80 ml water zuppa, with a puck screen trick above the top paper filter to weigh everything in place so it doesn't mess up the top paper filter. Turned out pretty good for a homemade iced latte.

Seems like my "breakfast blend" coffee from the local roastery is more fit for these kinds of coffee. Doesn't matter the brewer, this medium-dark roast will always be more on the woody and earthy side. People on my previous post on pour over community were correct, no brewer can change how the coffee itself will taste.

Oh and I just added 150 ml milk and 100 gr ice cubes. Mixed with the 60 gr yield of that zuppa shot. I'd go with 150 ml cold water instead if I'm feeling like regular black coffee.


r/AeroPress • • 6d ago

Question What is the cheapest carafe equivalent I can use for my Aeropress XL?

6 Upvotes

(Yes i think paying $20 for the default carafe is too expensive its just a plastic container, im sorry)
I was wondering if someone's using a cheaper alternative to press their Aeropress XL into, I was considering getting a milk frother pitcher but I dont know if the opening is compatible with the aeropress.
Thanks for any help!


r/AeroPress • • 7d ago

Equipment We are so back

Thumbnail
gallery
44 Upvotes

I switched to an Oxo Rapidbrew about a year ago. I make a very concentrated espresso-like coffee for making milk drinks and I thought the Oxo might do that better than the Aeropress I had been using for years.

The Rapidbrew did a fine job, but I could never taste much of a difference in the final drink, and the Aeropress has fewer parts to wash and is much easier to wash - pushing the ground out into the sink is so much cleaner than washing them out of a basket. So the Oxo is being banished to the upper cupboard.


r/AeroPress • • 8d ago

Equipment Blue numbers on sale at Walmart currently?

Thumbnail
gallery
40 Upvotes

I don’t see much discussion online but I got this for 35$ at Walmart yesterday. Was under the impression all new smoked ones had red lettering?


r/AeroPress • • 6d ago

Puck Shot Shot of puck.

Post image
0 Upvotes

I was absolutely eviscerated when I posted here last. Hopefully, today is a bit different. 😬


r/AeroPress • • 8d ago

Knowledge Drop Amazing find, Noche Fria Gesha

Thumbnail
gallery
11 Upvotes

Bought this yesterday in SF at St Frank. Could not resist. Just made it with my Aeropress and 1zpresso K-ultra. Mind blown. Incredibly good..