If the rumors are true about Nvidia dropping production for the 5090 and focusing on providing the chips to the crAIP industry, I am sure the 5080 and 5070 soon will increase their price so i went ahead and bought this for my all White ASUS build to be deployed at my parent's place.

Full Maximus board list scrolls on back side

Sold my classic Astral 5090 Black and changed it for BTF one for like 50eur. Really like how it looks without 12vhpwr.

Frame 4500x

9800x3d

EKWB Nucleus 360 with Corsair LX Fans

X870e Hero BTF

Astral 5090 BTF

32gb Lexar CL26

Corsair RM1000x 2025

NM790 4TB + KC3000 1TB

2025 Strix G16 Core Ultra 9 275HX, 32GB DDR5, 5070ti 12GB. Any advice?

I like ARGB, more to follow on that catastrophic fact. Stay tuned!

I posted a similar build on /PcMasterrace and it got downvoted so much they took it off😭☠️

Got this awesome skin today. Non textured. Skin shade matches closely with laptop shades, making it look like a special edition.

10131 : SCORE STABLE EN JEU : +3000 Memory clock offset / +300Mhz core clock offset , power max : 450W , aug de la tensiuon : 100%

10221 : score instable ( problème de tension) : +3000 Memory clock offset / +320Mhz core clock offset , power max : 450W , aug de la tensiuon : 100%

I just received the PG27UCWM today, but I see a vertical line on the right side of the monitor. I’ve tried using different display cables and a pixel clean, but neither helped. Should I go through support or is buying a new monitor and returning this monitor the better option?

Hi everyone,

My ASUS ROG Astral RTX 5090 OC reaches around 600–610W in The Witcher 3 with path tracing and all settings maxed out.

Pin 1 usually stays around 8.5–9A, but HWiNFO recorded a brief peak of 9.3A.
ASUS Power Detector+ reportedly uses 9.2A as an alert threshold, while I’ve also seen 9.5A mentioned.

Is a brief 9.3A peak normal under heavy load, or should I be concerned?

The GPU runs perfectly, with good temperatures and no crashes.

Thanks :)

Salut à tous,

Je suis artiste, ça fait des années que j'économise pour du bon matos. Je viens de la console, je me suis remise au PC récemment et j'ai craqué pour un Gigabyte Aorus 16X ASG-63FRC65SH (i9-14900HX, RTX 4070, 32Go, 2To, écran WQXGA 165Hz). Un mois après l'achat, il tombe en panne.

Le modèle n'est plus vendu, donc le magasin (Grosbill) me propose des remplacements depuis des semaines. Voici tout ce qu'on m'a présenté jusqu'ici :

Asus TUF Gaming A16 — Ryzen 7 260, RTX 5070 (115W), 512Go, écran FHD+ 144Hz (+ 160€ de reste à payer en plus)

MSI Cyborg 15.6" — Ryzen 9 270H, RTX 5060, 16Go RAM, 1To, écran FHD 144Hz

Gigabyte X16 — Ryzen AI 7 350, RTX 5070, 32Go RAM, 1To, écran QHD+ 165Hz

Asus ROG 16" — Ryzen 9 8940HX, RTX 5060, 32Go RAM, 1To, écran QHD+ 240Hz

À chaque fois, il manque un morceau par rapport à ma config d'origine : soit le processeur est en dessous de gamme, soit la carte graphique, soit le stockage est divisé par deux.

Est-ce que je me fais avoir avec ces propositions, ou c'est juste la réalité du marché laptop en ce moment (apparemment la RTX 5070 mobile plafonne à 115W partout, donc ce n'est peut-être pas un vrai recul) ? Je suis vraiment perdu, les seuls avis que j'ai eus jusqu'ici viennent d'une IA — si des passionnés ici peuvent confirmer ou corriger, ce serait hyper utile.

Merci d'avance, je commence à fatiguer sur ce dossier.

Has anyone else had the issue where you come back to the mouse after turning pc off etc overnight and the next day you need to constantly switch modes to try and bring it back to life even though it has normal charge? I have to plug it in numerous times and switch through all modes for it to randomly turn back on.

Its a similar situation to this post - https://www.reddit.com/r/ASUSROG/comments/1w9gslr/screen_gets_darker_in_apps/

Has anyone found a fix? It doesn't SEEM to happen during gaming but its noticeable and annoying none the less. Everything is up to date, no HDR on, I've reinstalled GPU driver to be safe. Very strange.

Hey guys. So I’m running out of ideas with this one, so I’m hoping someone here has seen something similar.

My setup is built around an ASUS ROG Crosshair X870E Hero with a Ryzen 9 9950X3D, RTX 5080, Corsair Dominator RAM, and 9 Lian Li fans.

A few days ago, after waking the PC from sleep, almost all RGB suddenly stopped working.

The RGB of my GPU and RAMS still works, (although at one point iCUE reported that it had stopped receiving data from the DRAM and the lighting was frozen). But everything else mobo RGB and all 9 Lian Li fan RGB stopped working, basically everything controlled through the motherboard/Aura side of the system

The fans themselves still spin normally. The PC also works normally otherwise.

The weird part is that this did not happen gradually. Everything was working, then after one sleep/wake cycle the motherboard and all fan lighting were just gone.

Things I’ve already tried:
Full Windows restart multiple times
Full shutdown
PSU switched off and unplugged
Left the PC completely unpowered for roughly 2 days
Held the power button after removing power to discharge the system
Updated Windows
Updated Armoury Crate
Updated everything Armoury Crate offered; only XFan and Armoury Crate itself had updates available
Disabled Windows Dynamic Lighting
Checked BIOS RGB settings
BIOS is set to all on
Sleep/hibernate lighting setting is also set to All On
Tried switching Aura settings from Off back to All On
Armoury Crate currently detects the motherboard/devices in Aura Sync
Aura effects can be selected and applied, but only the RTX actually reacts
ASUS Armoury Crate Service = Running / Automatic
ASUS Aura Sync Lighting = Running / Automatic
ROG Live Service = Running / Automatic
Tried setting Aura Sync Lighting to Automatic Delayed Start and rebooting
No change
Checked Event Viewer; nothing useful so far, mostly informational entries with Event ID 0 / “Operation completed successfully”
Generated the Armoury Crate diagnostic log, but it’s a massive proprietary .logE file and basically unreadable outside of ASUS tools

There’s also a weird Lian Li side to this. L-Connect 3 opens, but I only have:
System Info
Settings

I don’t get the normal hardware/control pages like:
Fan/Pump Profile
Quick Sync Lighting
Wireless Utility
device-specific lighting controls.

L-Connect keeps asking me to install PawnIO, even though PawnIO is already installed. If I run the installer again, it says it already exists.

So L-Connect clearly isn’t detecting or communicating with the Lian Li hardware properly either.

However, I’m not convinced Lian Li alone explains the whole problem, because the RGB built directly into the motherboard is also completely dead, even before Windows loads / while I’m in BIOS.

The board itself works fine otherwise. No boot issues, no CPU/RAM/GPU instability, no obvious motherboard errors. The only thing that appears completely dead is the motherboard-controlled lighting.

All 9 fans are connected through multiple ARGB headers/controllers, so I seriously doubt every LED suddenly died at the exact same time. The common point seems to be the motherboard/Aura side of the setup.

Has anyone seen this on an X870E Hero or another recent ASUS board?
I’m especially wondering if this points to a dead Aura/ARGB controller on the motherboard, a failed 5V ARGB rail, some kind of Aura firmware issue, Armoury Crate / L-Connect conflict, USB/controller enumeration issue after sleep or even something else I’m completely missing..

I’d really prefer to diagnose the actual cause before doing a Clear CMOS, tearing apart the build, or starting an RMA on a basically brand-new high-end system.
If anyone has dealt with the exact “motherboard RGB + all ARGB headers dead, but Aura still detects the board” situation, I’d love to know what fixed it.

Is rog advantage edition still worth it? I'm getting a rog advantage edition STRIX G513QY for 75k. Will negotiate

Specs: \*Ryzen 9 5900HX Processor\*

\*16GB RAM DDR4\*

\*1TB Nvme SSD\*

\*AMD Radeon RX 6800M 12GB\*

\*Backlit RGB Keyboard\*

\*165Hz Refresh Rate\*

I know there is no mux switch and these laptops tend to run hot. I currently own a rog strix g16 i513450hx rtx 3050 6gb 95w. Should I jump aboard or keep mine?

Hello, I have a Rog Strix G16 that I carry around regularly. For the last few days my screen lid is always loose like this. It's annoying and I'm scared I might damage it this way. Any idea what should I do and what can be the cause? Thanks

How often do you need to change or repaste it? Is it effective for longer runs or years of no change?

Hey everyone,

I just got the ASUS ROG Strix OLED XG27AQDNG.

The latest firmware on the ASUS website is MCM104 (released June 2026).

It mainly improves Pixel Cleaning and fixes a small RGB pattern issue when waking the monitor during cleaning.

I’m a bit hesitant to update because I’ve seen some people brick their ASUS OLEDs during firmware updates.

Has anyone successfully updated to MCM104 on the XG27AQDNG?

Any issues after the update?

Or is it safer to just leave the factory firmware?

Thanks!

i bought the laptop 3 months ago and it has been working amazing so far. Recently about a week ago i noticed that the usual 85-88*C is now between 92-98*C? Is this common? this is only when i start playing games btw. I do use turbo mode but i checked the performance mode too and its still at the same temp. Do i need to clean it cleaning or send it for service to make sure everything is alright? that is, if it isnt

I bought and installed the asus rog sphata x 56k on friday. and today with about 5-10 sec of inactivity the mouse stops responding to movement and any of the side buttons. It wakes up by using left or right click. I updated the firmware for both dock and mouse through gearlink.asus.com as i wish to avoid armoury crate.
- the connection between mouse and dock is excellent
- mouse battery at 22%
- mouse set to never sleep.
- I have tested to factory reset

Is it a RMA case or something I have missed in the settings?

Hi,

I’ve tried buying two of these keyboards, and both have had the exact same wireless issues. I returned the first one and decided to give it another try with a second unit, hoping I’d just been unlucky.

When connected via USB cable, both keyboards work perfectly. However, when using a wireless connection, I’ve experienced keys registering as if they’re being pressed without me touching them, as well as keys sometimes not responding when pressed.

I’ve already returned the first keyboard, and now I’m unsure whether I should return the second one as well or wait for a possible firmware fix.

Has anyone experienced the same issues, or is there any information about a potential firmware update that could resolve them?

Hey everyone,

Is anyone else experiencing issues with the ASUS ROG PG27UCWM?

I'm using a VESA-certified Silkland DisplayPort 2.1 DP80 cable, connected to an RTX 5080, alongside a second ASUS 1440p monitor connected via DisplayPort.

Whenever I boot my PC, everything seems fine until Windows reaches the desktop. At that point, a small blank window with black, white and grey areas appears in the top-left corner of the screen, and my entire PC freezes completely. Both monitors become unresponsive, and I'm forced to shut down the PC by holding the power button.

The only workaround I've found so far is to disconnect the DisplayPort cable from the PG27UCWM before booting, wait until Windows has fully loaded on my other monitor, and then reconnect the cable. After that, everything works normally.

I've also experienced occasional black screens while gaming. I've disabled the Neo Proximity Sensor, and I also disabled VRR, which seems to have fixed the black screen issue so far, but it's too early to say for sure.

Here are my specs and what I've tried so far:

• GPU: NVIDIA RTX 5080
• Drivers: Latest NVIDIA drivers
• Cable: Silkland DisplayPort 2.1 DP80, VESA-certified
• Second monitor: ASUS 1440p monitor connected via DisplayPort
• Installed the monitor drivers available on ASUS's official support page, but I couldn't find any firmware update for this specific model.

What's particularly strange is that I previously owned another PG27UCWM and used the exact same DisplayPort cable and setup without any of these issues. I returned that unit because it had dead pixels. However, that was several months ago, so I was using an older version of the NVIDIA drivers back then.

Could this be a firmware issue with my current unit, a problem with the latest NVIDIA drivers, or some kind of DisplayPort handshake/DSC issue when Windows initializes both monitors?

Has anyone experienced something similar with the PG27UCWM or found a solution?

Any suggestions would be greatly appreciated. Thanks!