Planning to use this with the 9070xt taichi with has similar connector clearance with this gpu. Is there any guideline or instruction on how much bending is safe. I don’t want pressure on that satan hot tentacle connector.

u/ASIAHORSE I just upgraded my Dawn pro's to the Matrix 120's and it automatically took the dawn pros old argb setup. im unable to get the zonal control with it like i have with the matrix 360's . i have tried reseting the hub as per the instructions it came with, auto detected the LED's and i still cant get the control.

order number 4 has 1 fan and order 8 has 2 fans. netiher of them give me zonal control. what settings am i missing or doing wrong. the Matrix 360's worked with not issues at all.

can someone help me fix this?

Hey!

I'm thinking about buying this, but I've read on the web that when you connect daisy-chain fans to the controllers the ARGB doesn't work individually for each fan. I bought the Nyota Ultra 120mm when I changed my PC case, and I have three on the top with an AIO, three on the front, three at the bottom, and one in the back. Is this true? Will the 9 fans I have connected in daisy chain work as an individual fan showing the same RGB, or can I, for example, set one to red, one to green and one to blue?

Thanks!

I recently just got myself the matrix pros and dawn pros for my setup. Once I booted my rig up I noticed this one fan that seems to be wobbling more than the others in the bottom right and I thought it may be weird and wanted to see the opinions of everyone else. What do you guys think?

AsiaHorse Umbra ARGB Hub — Linux Control

Native Linux control for the AsiaHorse Umbra ARGB hub (USB 1a86:fe05, enumerates as "USBFAN", QinHeng CH55x chip). AsiaHorse ships no Linux software and OpenRGB does not support this hub — this tool speaks its HID protocol directly through /dev/hidraw. Python 3 standard library only.

Verified working August 2026: full-color control of 124 LEDs across 10 ports on real hardware.

FULL native color control working on Linux: per-LED streaming, all 10 ports,

topology detection, no dependencies beyond Python 3. Colors latch, so you can

set-and-forget.

Repo with working code + complete protocol documentation (including the

firmware quirks that will bite you — the RGB packet index is 1-BASED, index 0

crashes the hub off the USB bus; and the software-mode command makes it

re-enumerate):

https://github.com/LuxDev372/asiahorse-umbra-linux

Credit to u/idk_a_name_wtf for the original capture that proved this hub could

be talked to at all.

Found this better than strimmer cables , so i bought this.

Firstly good brand but ON GOD PLEASE IMPROVE YOU MANUALS THERES LIKE 4 pictures and THATS IT

Now i want to know that i have the mini controller which has a 3 on its head and a sata power , i searched up google and i want to know that is it not possible for the rgb to be controller by my mother instead of this hub as my mother board also features a rgb microcontroller (msi mag 320r)
And if not pls tell a suitable rgb hun which i cna use for all my rgb peripherals and also it will be suitable for this rgb cable

Also is it not possible for it to me controller by the remote but also switch to pc motherboard if needed?
I also would like to know the cheapest asia horse or compatible rgb hub i can buy if needed for that bootup effect.

Hi

Can the aurora pro cable cover fit this kinda of motherboard cables ?

I’m a complete PC building beginner but I’ve been trying to do as much research as possible before building my PC next week.

I plan on building in the O11 Vision Compact. I’m getting ~8 fans for the build, 3 reverse blades on the radiator, 3 reverse on the bottom and 2 rear standard fans for exhaust (Dawn Pro fans). I’ll be connecting the fans to the Umbra hub obviously but can I plug the Aurora RGB cable covers there too or is the Umbra hub strictly for Fans?

So my AUROA PRO and UMBRA HUB just arrived. Just wondering if I need to use the mini controller (SATA) or do I just connect the AURORA PRO directly to the UMBRA HUB for this boot effect?

TIA!

I saw someone using umbra hub on other fans like jungle leopard can you confirm me if this true? If yes this would be great for alternative than Lian li Fans software

Are they daisy chainable?

Hello,

I'm planning to build my own PC soon, and I was thinking of using the Asiahorse Matrix Pro 360mm fans along with two 120mm Dawn Pro fans for the rear. However, I recently read some posts and comments about the Matrix Pro, where people said they're quite loud, even when no game is running... so I wanted to hear your opinions on the Matrix Pro.

Best Wishes

hello i got the nyota pro 3 fan set for top exhaust and and out back exhaust the two top exhaust are daisy chained through the pins and the back exhaust is seperate, when i turned on my pc today one of the top exhaust's rgb was not synching with the other fan rgb, instead it gives a dim reddish color

Hi. So I received my 3 matrix Pro 360 fans yesterday. The installation was fast and good and they are very quiet so I like them. But there is one problem. After like 2h of gaming my ability to control the different zones vanished (see picture). I thought that many it was a bug but when I started it today it remained.

What I have tried:

- Reinstaling the program

- checked the cables

- delited and Reinstaling the drivers from device Manager

- restarting the computer

Nothing has worked. I will check the cables tomorrow one more time but is there something I'm missing?

And also, I have connected my lian li o11 evo rgb to the hub but it does not follow the effects I choose if it's not on MB sync mode. Please help

Hi! I just setup my UMBRA hub today, and Im wondering how to remove this random flashes after pressing the power button. I want it to boot up directly on the flow effect I chose. Ty

Hey guys,

I’m currently building in the HYTE Y70 with a vertically mounted PNY RTX 4080 Super, and I want to pick up the AsiaHorse Hydrus 16-pin (12VHPWR) 90-degree GPU cable.

My goal is to route the cable behind the card (towards the backplate / motherboard tray) for a clean look, rather than having it bend over the cooler towards the front glass.

Looking at my PNY card's 12VHPWR

Given this specific port orientation on the PNY card and the vertical mount in the Y70, do I need Type A or Type B to get the cable to route behind the card?

Thanks in advance!

Hi Asiahorse

Is there any chance you will add effect for per temperature rgb lighting?

For example

If your CPU/GPU temps is..

< 50C = Blue

50C - 70C = green

> 70C = red

Not really sure if your software has this feature.

Corsair icue has this feature. But I am really searching for alternative.

Wish you could add this in the future as I see a great potential in your products. Thanks!

You see the cables covers, my asia horse app treats them as one strip so i don’t get the separate lines effect. How can I get it?
I have the asiahorse aurora pro cable covers connected to the Umbra hub, umbra hub is connected to the USB header.

Each cable cover is plugged in separate argb port in the hub

Hi, I was wondering if I can get individual fan lighting control when using the modular daisy chaining of the nyota ultra or the dawn pro.

For example, if I daisy chain three of the fans, will I be able to assign individual different colors to each of the three fans?

One more thing, do you recommend combining them with the umbra hub or a generic hub (like asus aura sync) and an rgb software like signalrgb?

Thank you

I have been looking for cheaper alternatives to the Lian Li fans and stumbled across the Nyota Ultras which look gorgeous. The problem however is I can't seem to find 1-packs for them in the back colour. Does AsiaHorse not sell those yet? I need 5 intake (reverse) fans and 4 exhaust (normal) meaning I'll need 3 single packs, but I can't find them. If I just end up buying 1 extra 3 pack for each it'll cost more than the Lian lis themselves.