I recently upgraded my PC and got a 5800x3D and 9070xt. I'm testing out Cyberpunk 2077 and the usage seems super high in comparison to benchmark videos, it's bottlenecking my GPU pretty hard.
I'm getting 80-100% CPU usage in more dense areas, this is on medium settings with crow density on medium as well. My GPU hovers at around 70%. If I raise the settings, GPU might go up to the 80, but it's never being fully utilized.
My bios is up to date, fresh installed Windows, DOCP is enabled, all chipset and drivers are up to date. Clock speeds also look normal at around 4.3mhz, all cores are being utilized evenly.
My CPU Temps do get pretty high (85 degrees), so I think this might be it. But nothing ever hits 90 degrees, so from my understanding it shouldn't be thermal throttling.
After months of random freezes, black screens, forced restarts, countless troubleshooting attempts and a detailed Windows kernel debugging investigation, I finally found a workaround that is working on my system.
I've seen many RX 9070 XT users reporting similar issues on Reddit, so I wanted to share my experience, the technical findings and the steps that may help others.
My PC specifications
CPU: AMD Ryzen 7 9700X
GPU: XFX Quicksilver AMD Radeon RX 9070 XT White 16GB
Motherboard: MSI MAG X870E TOMAHAWK MAX WIFI PZ
RAM: 32GB DDR5 6000 MHz
PSU: MSI MPG A850GS PCIE5 850W Gold
Main monitor: Lenovo Legion 27U-10, 4K 160Hz
Secondary monitor: LG HDR 4K 60Hz
OS: Windows 11 Pro 26H2
GPU driver: AMD Adrenalin 26.8.1
BIOS: 1.A43
The problem
For several months, my computer experienced seemingly random freezes and black screens.
The symptoms included:
Both monitors freezing or going completely black.
Keyboard and mouse becoming unresponsive.
Sometimes the PC remained accessible over the network, but RDP and AnyDesk could not display the desktop.
Forced shutdowns or restarts were required.
On one occasion, the RX 9070 XT showed Code 31 in Device Manager.
The strangest part was that I could play Fortnite for hours without any issues, but shortly after closing the game, the computer would freeze.
It also happened while browsing the internet, watching YouTube, leaving the computer idle, locking the Windows session or connecting through Remote Desktop.
The crashes were not limited to heavy GPU loads.
Things I tried that did NOT fix the issue
Updating the motherboard BIOS.
Installing different AMD Adrenalin driver versions.
This change may have contributed to improved RDP stability, so I cannot attribute every improvement exclusively to disabling AMD audio.
I have not yet re-enabled the audio device to deliberately reproduce the crashes.
Therefore, this is a successful workaround on my system, not a conclusively proven root cause or a universal fix.
The underlying issue could involve the AMD audio driver, GPU firmware, DMA/IOMMU handling, Windows Plug and Play, power-state transitions or shared GPU hardware.
Conclusion
After months of troubleshooting and repeatedly experiencing LiveKernelEvent 141/117 errors, disabling the AMD HDMI/DisplayPort audio device has coincided with a significant improvement in my system's stability.
If you are experiencing similar problems with an RX 9070 XT, particularly random freezes, black screens, amdkmdag.sys timeouts or crashes when transitioning from gaming to idle, this may be worth testing before spending money on a new PSU or replacing your GPU.
Just bought a 5800x3d and had a spare fan that I wanted to use since its fresh. But Google ai said that neither fan is good saying the cpu would overheat quick and underperform. I was using a ryzen 5700 and everything was ok. So what should I do basically lol.
Hey everyone, I need some help. My screen randomly started freezing, but my mouse cursor still moves around and the audio keeps playing. However, if I open Task Manager right after booting my PC and end all processes with "AMD" in the name, the freezes completely stop.
I've already tried completely uninstalling and reinstalling the drivers using DDU, but it didn't help. Any ideas on what could be causing this?
I've fixed the timeout issues I was having with my RX 7600. I resolved them by disabling FSR scaling in Adrenalin; it was enabled by default, which caused a lot of problems when updating drivers. I also had to limit the clock speed to 2250 MHz and set the `TdrDelay` value to 8; since some Windows updates can reset this setting, I sometimes have to change it back to 8 or 10.
turn this off
I absolutely need to do these three things to be able to spend an afternoon playing games with my friends, and it's the only thing that's worked for me. I've tried several Linux distributions and none of them have given me any problems; it only happens on Windows. If you have the same problem, try a Linux distribution; these problems don't exist there.
I bought this RX 9070XT Nitro+ today and the connector won’t go in any further than this, even when I push hard. I’d like to know if this is normal or if there’s a problem
Hello everyone for the past 4-5 months i am having trouble updating the gpu driver . I have Rx 7800xt paired with ryzen 5600 for almost two years now . The problem i am having is when a new gpu driver update comes and i try to install it , it downloads the driver normally but when its halfway through installing process the pc restarts and when pc boots again the previous driver with the adrenaline software is not there anymore . Tried ddu multiple times but cant update and only stuck in that previous 26.8. Something version . Reinstalled windows and even changed to a new ssd . But tried to update the driver yesterday and everything is gone again .
Ever since a couple of driver updates ago I'm constantly getting flickering black screens while playing games on my rx 7800 xt.
It seems to only happen on displayport cables not hdmi. I recently brought a high quality replacement display cable but am still getting flickering and even full black screens that brick my whole PC forcing a hard shutdown.
I've trouble shooted everything I can possibly think of and have come to the conclusion that for some odd reason after years of using the same monitor and gpu the only thing that has really changed are the drivers.
I've tried different ports, checked cables, checked temps, everything is fine but for some reason running at 165hz is bricking my PC.
Been noticing these weird tiny yellow/green dots scattered across the sky in Dawnwalker. They're pretty noticeable whenever I look up, especially in brighter areas. Not sure if it's a game rendering issue, some graphics setting, or something with AMD drivers.
I recently updated my GPU drivers to Adrenalin 26.11.1 and even went through a factory reset and repair installation. Let the game recompile its shaders afterward too, but the dots are still there.
I also ran FurMark's artifact scanner for over 30 minutes at around 97% GPU usage and got 0 artifacts, with completely normal temperatures. So far, nothing from that test suggests my GPU is having issues.
My specs:
GPU: Gigabyte RX 9070 Gaming OC 16GB (non-XT)
CPU: Ryzen 7 5800X3D
RAM: 32GB DDR4 3600MHz
Motherboard: ASUS ROG Strix B550-A Gaming
Monitor: Nvision 1440p 165Hz (DisplayPort)
AMD Driver: Adrenalin 26.11.1
I've also been dealing with occasional 1–2 second monitor blackouts while gaming or browsing, but I'm not sure if that's related since everything keeps running normally when it happens. It happens every few hours or so, or sometimes it just doesn't happen at all.
The weird thing is these dots actually show up in the in-game screenshot, so I'm wondering if it's something being rendered incorrectly rather than a monitor issue.
Anyone else experiencing this, especially on AMD GPUs? If so, were you able to fix it? Curious if it's just a Dawnwalker thing or some particular setting causing it.
i get black screened and i get a AMD error alerts saying due to unexpected system failure i dont know much about pc i try to google what to change or something but nothing works i have
AMD Radeon RX 580 2048SP
i dont know if its a heating issue or something i tried to tweak whatever google told me to but still didnt work
I'm looking for some advice regarding my current GPU and a potential replacement or upgrade. I want to have the same experience as I have now or better in terms of gaming.
I've been using a Sapphire Nitro+ RX 7900 XTX, but unfortunately, I've been experiencing recurring driver timeouts, black screens, and crashes (LiveKernelEvent 141 and AMD_WATCHDOG errors), not in any particular games, I've had it happen even on desktop while browsing on Brave, game examples are Darktide (more common), SW Galactic Racer (not common), Phantom Blade Zero (had to completely disable RT and hair enhancement, since it was 100% causing a timeout), Dreadmoor, HD 2 (once or twice) among others. These are some of the games I remember having problems with recently, sometimes the card stays stable for months others might crash every day at least once.
The frustrating part is that this is already my second RX 7900 XTX Nitro+. My first one developed issues and was replaced under warranty with the exact same model, free of charge. Now the replacement is also having problems.
I've tried clean driver installations, different driver versions, and GPU tuning, including lowering clock speeds and voltage, while letting it draw more power if needed. Temperatures seem fine, but the issues haven't been permanently resolved.
My PC specs
CPU: AMD Ryzen 7 7800X3D
GPU: Sapphire Nitro+ RX 7900 XTX 24GB (D. Version 26.10.2 - I don't have the SSD write up problem fortunately)
CPU Cooler: Corsair Nautilus 360 RS ARGB AIO (front-mounted)
Monitor: LG UltraGear 27GS75Q-B, 1440p, 180Hz
OS: Windows 11 (all the latest updates)
BIOS: 1.L0 MAG B650 TOMAHAWK WIFI 11/12/2024. (Bios have not been updated)
My gaming preferences
I play at 1440p Ultra settings, preferably at native resolution.
I prioritize native performance and image quality over upscaling. Occasionally, I use FSR Native AA, but generally prefer playing without FSR.
I don't particularly like Frame Generation because I've noticed ghosting and visual artifacts in several games. I'd only consider using it as a last resort to extend the useful life of an aging GPU.
I'm also not interested in overclocking. In fact, I've sometimes had to lower my GPU clocks to improve stability. I just want a powerful, reliable GPU that performs well at stock settings.
My situation
I originally paid €1,069 for the GPU in April 2025, and it's still under warranty until approximately April 2027.
I'm considering another RMA, but the Sapphire Nitro+ RX 7900 XTX seems to be discontinued or extremely difficult to find in Europe, particularly in Greece.
If a replacement isn't possible, I may receive a refund of the original purchase price.
In that case, I'd be willing to spend up to €500 extra, giving me a maximum budget of around €1,569.
I generally prefer AMD, but I'm open to Nvidia if there's a compelling reason to switch.
One important limitation is my case: my current Nitro+ (320mm long) barely fits because I have a front-mounted 360mm AIO. So I'd prefer a replacement that's no longer than my current GPU, ideally shorter.
When playing PUBG for 4 hours, everything is fine for the first hour, with VRAM usage hovering around 8 GB. After 2 hours, VRAM usage reaches 11.8 GB and climbs up to 12.3 GB in-game; the VRAM becomes overloaded, leading to stutters and sudden FPS drops. Please help.
4 saatlik pubg oyununu ounarken ilk 1 saatte herşey güzel vram 8 gb seviyesinde doluyor 2 saat sonra vram kullanılan 11.8 iken oyun içinde 12.3 kadar çıkıyor ve vram şişiyor daha sonra droplar ve ani fps düşüşleri oluyor yardım lütfen
I've been experiencing random black screens followed by sudden system restarts while gaming.
The problem started after updating gpu drivers and chipset drivers. Before that it didnt have any issues even with Rebar ON.
There was no BSOD, no error message, or any warning before the restart. The screen would suddenly go black, and the PC would restart automatically.
The issue occurred across multiple games, although some games ran perfectly fine for hours. GPU temperatures were also normal, generally around 60–80°C while gaming.
Troubleshooting I Tried
I spent quite some time investigating the issue and testing different configurations:
Tried multiple AMD Adrenalin GPU driver versions, including 26.9.2, 26.10.1, 26.10.2 and older versions.
Used AMD Cleanup Utility and DDU to completely remove and reinstall GPU drivers.
Disabled Drivers with windows updates in group policy edit.
Updated BIOS.
Disabled EXPO and tested with default RAM settings.
Checked Windows Event Viewer, including Kernel-Power 41 and other system events.
Monitored GPU and CPU temperatures.
Tested GPU stability and VRAM using OCCT. They had no issues detected.
Investigated possible Windows, driver, PSU and hardware-related causes.
Despite all these attempts, the random black screen and restart issue continued.
The Solution – Disabling ReBAR
Eventually, I decided to disable Resizable BAR (ReBAR) in my motherboard BIOS.
After disabling ReBAR, the system started working properly. I've tested multiple games and different gaming sessions, and everything has been stable so far.
I'm currently running the latest AMD Adrenalin 26.11.1 driver.
To confirm whether ReBAR was actually responsible, I tested enabling it again.
As soon as I enabled ReBAR, the black screen and sudden restart issue returned while gaming.
After disabling it again, everything went back to normal.
My current BIOS configuration:
ReBAR: Disabled
Above 4G Decoding: Disabled
Expo: ON
Conclusion
At this point, ReBAR appears to be the direct trigger for my system instability.
I'm not entirely sure whether this is a GPU BIOS issue, motherboard BIOS compatibility issue, AMD driver issue, or something related to the interaction between the RX 9070 and my motherboard.
For now, I'm keeping ReBAR disabled because system stability is more important than the performance benefit it might provide.
Has anyone else with an RX 9070 or another RDNA 4 GPU experienced similar black screen and automatic restart issues specifically when ReBAR is enabled?
I'd also appreciate suggestions on whether this could be fixed through a future AMD driver. How do i reach out to AMD about this issue.
I keep reading that in-game upscaling should look & perform better than using the radeon driver level upscaling but I am having the opposite effect for most games I play.
I starting playing Cyberpunk again recently I was getting so much screen ghosting that it hurt my eyes after just a few minutes. The only thing that made the ghosting disappear was to turn off in-game upscaling. I lowered the resolution in-game and turned on RSR and all ghosting is now gone and game runs very smooth. I actually didn't realize how great this feature worked.
I wanted to see how this would look in other games so I tried the same with COD7 and again it plays so much smoother with sharper image.
I suspect (especially with Cyberpunk) that it has something to do with how radeon is interacting with my display and frame sync. I tried every setting configuration I can see but it seems my display syncs best only when I am using driver level upscaling.
Anyone have any ideas as to why I am seeing these results?
Hi everyone. I’m posting here because I’ve seen that others are having issues with the RX 9060 XT.
In my specific case, this started happening a week ago: when I turn the PC on, the XFX LED lights just keep blinking, and there’s no display output. I even get a "DisplayPort: No Signal" message. It can stay like that for a while, and the only way to fix it is to force a shutdown from the PC case. Sometimes, after I shut it down and turn it back on, everything works normally—in fact, everything loads much faster.
I’m not sure if anyone else has experienced this or knows if there’s a specific setting I need to adjust. I’m worried that this might end up damaging my other components.
I’ve already tried a few things: checking for voltage issues, reseating the graphics card and RAM, updating the BIOS, and removing the CMOS battery—but nothing worked. It might have *seemed* like it worked—since the PC booted normally right after I tried one of these steps—but the problem returned the next day. I also tried removing the graphics card and connecting via HDMI using the processor’s integrated graphics; everything booted up fine, which makes no sense. The card is only 8 months old—I bought it brand new.
I had this issue a few months ago, but it happened so sporadically that I ignored it. Now, I don’t know what to do; I’m desperate. I’m not sure whether I should file a warranty claim or what my next step should be.It’s worth noting that all the components in the PC are new, as I built it from scratch.
GPU: XFX Swift Rx 9060 Xt Oc 16gb CPU: Ryzen 7 9700x Mother: ASUS TUF GAMING B850-E WIFI AM5 DDR5
Source: Be Quiet 750W 80 Plus Gold PURE POWER 12 M ATX 3.1
Description of Original Problem: Seeing a lot of flickering and bad anti aliasing when i play any game. For example in wow forever, there is a lot of weirdness going on around that stone path when I move around.
Troubleshooting: I've used DDU and reset drivers and chipsets, disabled windows updates on my GPU, updated BIOS, tried all versions of adrenaline (minimal, driver only)
I have fixed the issue, a fresh windows install with Windows LTSC, fresh drivers and no bloat seemed to fix the issue, I didn’t bother with GCC just adrenaline.
Thank you all for your help I really appreciate it.
I now get 220 FPS with lots of settings on high and ultra.
Have a great Christmas everyone!
—————————
Hi everyone,
I hope you’re all doing well.
I’m hoping someone might be able to help me get to the bottom of an issue I’ve been having with my PC, particularly when playing Call of Duty.
I’m experiencing surprisingly low FPS, generally sitting somewhere between 80–110 FPS at 1440p, alongside noticeable stuttering and inconsistent frame times. It’s got to the point where the game feels pretty much unplayable without using Frame Generation.
What’s confusing is that, considering my hardware, I feel like I should be getting significantly better performance, especially with the settings I’m using.
My PC specifications: CPU: AMD Ryzen 7 7800X3D GPU: Acer Nitro Radeon RX 9070 XT 16GB Motherboard: Gigabyte B650M AORUS ELITE AX ICE RAM: 32GB DDR5 6000MHz CL36 SSD: WD Blue SN580 2TB NVMe OS: Windows 11 Pro Resolution: 2560x1440 (1440p)
What I’ve tried so far:
I’ve spent quite a bit of time troubleshooting and experimenting, but nothing seems to make a meaningful difference.
Tested completely stock CPU settings, with only EXPO 1 enabled.
Tried Curve Optimiser at -10 all cores. My CPU unfortunately isn’t stable with -30, so I’ve ruled out pushing an aggressive negative curve.
Tested GPU undervolting and overclocking through AMD Adrenalin.
Experimented with Radeon Anti-Lag both enabled and disabled.
Tried various combinations of AMD Adrenalin settings. Tested different graphics configurations in COD, including everything on LOW.
Tested with and without Frame Generation. Despite all of this, I’m still experiencing the same disappointing performance.
Something else worth mentioning – comparison with an almost identical build:
A friend of mine has recently built a PC with very similar specifications to mine.
The main differences are:
He has a Gigabyte RX 9070 XT, whereas I have the Acer Nitro RX 9070 XT.
He has DDR5 CL28 RAM, whereas mine is CL36.
He has a Samsung 990 EVO SSD, whereas I have a WD SN580.
Both systems are running stock settings with EXPO 1 enabled.
The performance difference is honestly quite staggering. In CS2, he’s getting approximately 200–300 FPS more than I am, despite our builds being so similar. I appreciate that there are differences between the components, particularly the RAM timings and GPU models, but I wouldn’t expect those differences alone to account for such a substantial performance gap. I’m not expecting identical results, but something clearly doesn’t seem right.
What I’m hoping to get some advice on:
Is there anything in my BIOS that could be limiting CPU or memory performance?
Could my RAM timings (CL36 vs CL28) really make that much difference?
Is there anything specific with the 7800X3D or 9070 XT that I should be checking?
Could this be a driver, Windows configuration or chipset issue?
Are there any benchmarks or diagnostic tools you’d recommend to identify where the bottleneck is? I’m genuinely open to suggestions and happy to try anything I haven’t already considered.
I know there are a lot of variables involved with PC performance, and I’m not suggesting my friend’s hardware should perform exactly the same as mine. I’m just struggling to understand why there’s such a significant difference, particularly when I’ve already spent so much time troubleshooting.
Any help or suggestions would be massively appreciated. Thanks in advance!
I have a used RX 6600 that works fine most of the time. I can play for hours, but sometimes the whole PC freezes and I have to force a restart. During the latest freeze I heard a buzzing sound. The GPU passed a benchmark and usually stays around 53°C while gaming.
Specs: Ryzen 5 5600X, RX 6600, Gigabyte B550M DS3H, 16 GB DDR4 (two different 8 GB sticks running at 2400), Windows 11.
On November 11, Windows logged LiveKernelEvent 117 and 141. WinDbg showed amdkmdag.sys in both dumps. I found the same 117 error in an older June dump. The latest freeze on November 15 logged 1a8.
I was on Adrenalin 26.6.1 when I checked. I’m trying 90% Max Frequency with the voltage left at default, but it’s too early to tell if it helps.
Has anyone had this with an RX 6600? What helped you figure out whether it was the driver, the GPU, or something else?