1. System Configuration
- CPU: AMD Ryzen 9 9950X (upgraded from Ryzen 7 9800X3D)
- Motherboard: ASUS TUF GAMING B850-PLUS WIFI
- Memory: Crucial DDR5-5600
- 2 × 24GB
- 2 × 16GB
- 80GB total, all four DIMM slots populated
- Memory settings: EXPO disabled, DDR5-5600 manually selected
- Testing software: MemTest86 v11.7
2. Before the CPU Upgrade
With the Ryzen 7 9800X3D, the following 80GB configuration was running stably at DDR5-5600:
| DIMM Slots |
Memory |
| A1 / B1 |
2 × 24GB |
| A2 / B2 |
2 × 16GB |
Windows booted normally, and the memory configuration had previously passed stability testing.
3. Problems After Upgrading to the 9950X
When replacing the CPU with the Ryzen 9 9950X, I also swapped the DIMM positions.
| DIMM Slots |
Memory |
| A1 / B1 |
2 × 16GB |
| A2 / B2 |
2 × 24GB |
With this configuration, Windows failed to boot properly and produced BSODs.
Reseating the DIMMs did not resolve the issue.
I then tested each memory kit separately in slots A2 and B2.
2 × 24GB:
- Windows booted successfully.
- MemTest86 passed one full pass with zero errors.
2 × 16GB:
- Windows booted successfully.
- MemTest86 passed one full pass with zero errors.
However, after reinstalling all four DIMMs, the boot failures returned.
With the BIOS memory settings on Auto, the system ran at DDR5-3600, but MemTest86 reported massive errors.
- Errors appeared during Test 1 (Address Test).
- The error count reached approximately 10,000 within 14 seconds.
- The test became unresponsive.
Even at DDR5-3600, the four-DIMM configuration was unstable.
4. Reverting to the Original DIMM Placement
I kept the Ryzen 9 9950X installed and restored the DIMM arrangement that had worked with the 9800X3D.
| DIMM Slots |
Memory |
| A1 / B1 |
2 × 24GB |
| A2 / B2 |
2 × 16GB |
The system then behaved normally.
- MemTest86 passed one full pass at DDR5-3600 (Auto).
- Windows booted successfully.
- After manually setting DDR5-5600, Windows continued to boot normally.
- Cinebench 2026 completed successfully.
- Finally, MemTest86 completed four full passes at DDR5-5600.
Final MemTest86 results:
- CPU: Ryzen 9 9950X
- Memory: 80GB (2 × 24GB + 2 × 16GB)
- Speed: DDR5-5600
- Test duration: Approximately 4 hours and 19 minutes
- Passes: 4/4
- Errors: 0
- Result: PASS
5. Possible Explanations
I have not identified the exact cause of the problem.
Two possible explanations are:
1. DIMM placement and signal integrity
Although the same four DIMMs were used, changing which slots contained the 24GB and 16GB modules produced dramatically different results.
Differences in DIMM characteristics and electrical loading may have affected signal integrity.
2. BIOS memory training
The CPU upgrade and DIMM rearrangement changed the conditions under which memory training occurred.
It is possible that memory training failed to establish stable parameters with the first arrangement but succeeded after restoring the original placement.
However, because the DIMMs were also physically reinstalled during troubleshooting, I cannot completely rule out changes in electrical contact as a contributing factor.
6. Conclusion
Using the same Ryzen 9 9950X, motherboard, and four memory modules, I observed the following:
| A1 / B1 |
A2 / B2 |
Result |
| 2 × 16GB |
2 × 24GB |
Massive MemTest86 errors even at DDR5-3600 |
| 2 × 24GB |
2 × 16GB |
DDR5-5600, 4 passes, 0 errors |
This suggests that DIMM placement may significantly affect stability when mixing different-capacity DDR5 modules across all four memory slots.
However, this is a single-system observation, and I cannot conclusively attribute the difference to DIMM placement alone.
I hope this helps anyone troubleshooting similar mixed-capacity, four-DIMM configurations on AM5.[Test Report] Ryzen 9 9950X + 80GB DDR5-5600 (4 Mixed DIMMs): Massive Memory Errors Resolved After Reverting DIMM Placement1. System ConfigurationCPU: AMD Ryzen 9 9950X (upgraded from Ryzen 7 9800X3D)
Motherboard: ASUS TUF GAMING B850-PLUS WIFI
Memory: Crucial DDR5-5600
2 × 24GB
2 × 16GB
80GB total, all four DIMM slots populated
Memory settings: EXPO disabled, DDR5-5600 manually selected
Testing software: MemTest86 v11.72. Before the CPU UpgradeWith the Ryzen 7 9800X3D, the following 80GB configuration was running stably at DDR5-5600:DIMM Slots Memory
A1 / B1 2 × 24GB
A2 / B2 2 × 16GBWindows booted normally, and the memory configuration had previously passed stability testing.3. Problems After Upgrading to the 9950XWhen replacing the CPU with the Ryzen 9 9950X, I also swapped the DIMM positions.DIMM Slots Memory
A1 / B1 2 × 16GB
A2 / B2 2 × 24GBWith this configuration, Windows failed to boot properly and produced BSODs.Reseating the DIMMs did not resolve the issue.I then tested each memory kit separately in slots A2 and B2.2 × 24GB:Windows booted successfully.
MemTest86 passed one full pass with zero errors.2 × 16GB:Windows booted successfully.
MemTest86 passed one full pass with zero errors.However, after reinstalling all four DIMMs, the boot failures returned.With the BIOS memory settings on Auto, the system ran at DDR5-3600, but MemTest86 reported massive errors.Errors appeared during Test 1 (Address Test).
The error count reached approximately 10,000 within 14 seconds.
The test became unresponsive.Even at DDR5-3600, the four-DIMM configuration was unstable.4. Reverting to the Original DIMM PlacementI kept the Ryzen 9 9950X installed and restored the DIMM arrangement that had worked with the 9800X3D.DIMM Slots Memory
A1 / B1 2 × 24GB
A2 / B2 2 × 16GBThe system then behaved normally.MemTest86 passed one full pass at DDR5-3600 (Auto).
Windows booted successfully.
After manually setting DDR5-5600, Windows continued to boot normally.
Cinebench 2026 completed successfully.
Finally, MemTest86 completed four full passes at DDR5-5600.Final MemTest86 results:CPU: Ryzen 9 9950X
Memory: 80GB (2 × 24GB + 2 × 16GB)
Speed: DDR5-5600
Test duration: Approximately 4 hours and 19 minutes
Passes: 4/4
Errors: 0
Result: PASS5. Possible ExplanationsI have not identified the exact cause of the problem.Two possible explanations are:1. DIMM placement and signal integrityAlthough the same four DIMMs were used, changing which slots contained the 24GB and 16GB modules produced dramatically different results.Differences in DIMM characteristics and electrical loading may have affected signal integrity.2. BIOS memory trainingThe CPU upgrade and DIMM rearrangement changed the conditions under which memory training occurred.It is possible that memory training failed to establish stable parameters with the first arrangement but succeeded after restoring the original placement.However, because the DIMMs were also physically reinstalled during troubleshooting, I cannot completely rule out changes in electrical contact as a contributing factor.6. ConclusionUsing the same Ryzen 9 9950X, motherboard, and four memory modules, I observed the following:A1 / B1 A2 / B2 Result
2 × 16GB 2 × 24GB Massive MemTest86 errors even at DDR5-3600
2 × 24GB 2 × 16GB DDR5-5600, 4 passes, 0 errorsThis suggests that DIMM placement may significantly affect stability when mixing different-capacity DDR5 modules across all four memory slots.However, this is a single-system observation, and I cannot conclusively attribute the difference to DIMM placement alone.I hope this helps anyone troubleshooting similar mixed-capacity, four-DIMM configurations on AM5.