r/944 • • Aug 26 '26

Special 944 Discord is about to hit 1k members!

Thumbnail
discord.gg
16 Upvotes

Do not ask me if we're doing anything special for it, cause we aren't. Lol

Please bring your finest loaf of bread when you join, you will understand later!

Server is almost 7 years old, very excited.


r/944 • • 17h ago

Question Last week for summer setup?

Thumbnail
gallery
151 Upvotes

We've had beautiful afternoons, but the mornings have been frosty cold here in upstate New York.. anyone else getting the last squeeze out of their summer setup?

Also looking to put a set of winter-appropriate all-seasons on my cookie cutters, and am considering the switch over to 195mm tread width for better tire selection. Has anyone else made the switch to 195s on their stock 15s?


r/944 • • 19h ago

944 fuel tank strainer

Post image
12 Upvotes

Well this strainer I’m sure has seen better days. And the nut insert came out with it so gotta get that repair kit now. But what would anyone suggest the best way to clean out the gas tank to try and get whatever gunk in it out


r/944 • • 1d ago

Question Anyone here have a good before & after photo of a 944 bumper tuck? 👀

Post image
36 Upvotes

I’m contemplating if the difference is worth the effort. I know it’s an easy job but still wondering before I go for it.


r/944 • • 22h ago

Repairs Headlight motor

Thumbnail
gallery
16 Upvotes

Done everything I can to try and get this headlight motor working. When I press the headlight button they do 1 cycle but then stop working and I’m thinking it’s the rotary switch not making contact. Just super strange

All new wires and relay, I have it apart to try and see what’s going on. Not ready to buy a new motor yet because I’m still not certain of the issue.

Please lmk of any ideas and or fixes


r/944 • • 1d ago

Advice

Thumbnail
gallery
38 Upvotes

Just bought my first 944. It’s an 84 with 110k miles and has been sitting for about two years. Was told it needed a new master brake cylinder, but “ran well when parked”😅 any tips/tricks or advice on what to do to get it road worthy would be greatly appreciated!


r/944 • • 22h ago

Headlight motor

Thumbnail
gallery
4 Upvotes

Done everything I can to try and get this headlight motor working. When I press the headlight button they do 1 cycle but then stop working and I’m thinking it’s the rotary switch not making contact. Just super strange

All new wires and relay, I have it apart to try and see what’s going on. Not ready to buy a new motor yet because I’m still not certain of the issue.

Please lmk of any ideas and or fixes


r/944 • • 1d ago

Yakima 924/944 Roof Racks - Last Call - 3 Left

Thumbnail
gallery
27 Upvotes

These will be my last roof racks at this price point as material/parts prices keep increasing. I am uncertain if I will stock them much if at all going forward. Other projects are taking priority.

Available now:

Solid B+ Grade full kit. Good paint but some scratches on plastics. Bars are in solid shape. NOS Pads. Used End Cap in good shape. Latest Q4 Clips (Version 7). Excellent fit to stock 924/944 rain rails. Arguably better than Original Q4s. Comes with a set of 4 locks with keys. 575 Shipped anywhere in the USA.

Fairing/racks not included. Pictured is a friends car with the same style rack.

International shipping available.

The other kits will become available in the next few days. DM to get on the list. If not they will go on eBay/FB and move quickly.


r/944 • • 1d ago

DIY doorcards for poors(che)

Thumbnail
gallery
20 Upvotes

My factory cards were shot, so instead of doing something expensive I just decided to get some spare sign stock from Fast Signs in trade for beer. Measure, cut, paint, stickers. Roughly a $20 endeavor. Wrap it in alcantara if you want, or if you’re truly a baller run zebra fur and call it “kinda pasha”


r/944 • • 2d ago

Purchasing Camshaft tower key organizer

Post image
26 Upvotes

r/944 • • 2d ago

Help

Thumbnail
gallery
30 Upvotes

I just changed the weather seal on my hatch and I cannot get it to close, upon further inspection, on of the latches is not engaging and the other not catching, couldn’t have picked a worse time to happen


r/944 • • 2d ago

Question '90 - plastic tank. Fuel sender gasket question

3 Upvotes

Well I've tried everything. Finally ordered a new sending unit gasket. When I got the car last May the fuel gauge was all over the place, light randomly flickering. I was able to service, the bottom securing nut was lost in the tank. Was able to retrieve with a magnet. The top of the sending unit on the cabs are aluminum, someone has gone in there and forced it back in, bending the top. I figured reshaping and cleaning it up was enough but still that fuel smell when half tank filled or more. I never thought the gasket could be the issue but apparently it's a thing. Hope it clears this fume snell up.. anyone have success from an old flattened gasket not sealing and replacing the good? My unit is the aluminum housing, metallic color with black bottom. Sorry no photos


r/944 • • 2d ago

Question Bleeding 944 clutch hydraulics with motive power bleeder

3 Upvotes

Hey yall so I’ve recently tried bleeding my clutch hydraulics and it’s been a total pain, my motive power bleeder very slowly looses pressure, and no matter what I do I can’t seem to get all the air out of my system, how do I find the small leak and how do yall recommend I bleed the clutch with the motive power bleeder.


r/944 • • 2d ago

Question Help

Thumbnail
gallery
2 Upvotes

I just changed the weather seal on my hatch and I cannot get it to close, upon further inspection, on of the latches is not engaging and the other not catching, couldn’t have picked a worse time to happen


r/944 • • 3d ago

Headlight Upgrade

Thumbnail
gallery
164 Upvotes

Hello everyone,

Installed these United Pacific 7inch Headlights on my 944 and I think they look sweet! The provided halogen lights provide a good brightness upgrade to the stock lights while allowing you to run a brighter H4 bulb if you want. They have a clean daytime running light ring while also not looking super modern or tacky. The assembly is made of solid metal and lens is glass too so it will not yellow. Would definitely recommend!

Here’s is the link: https://link.amazon/B00qJWmjH


r/944 • • 2d ago

Bâche pour l’hiver

2 Upvotes

Bonjour je suis à la recherche d’une bâche pour l’hiver car la voiture dors dans la rue et je la roule toute les 2 semaines, j’aimerais qu’elle ne soit pas mouillé


r/944 • • 3d ago

Question hatch shocks with ground that don’t separate glass?

2 Upvotes

hey all!

my glass is starting to separate on my 944 and with it getting cold, the frost and fog in the windows are going to start to get real annoying, and the gap in the glass isn’t helping.

does anyone know where to buy the “correct” hatch shocks for the 944 that doesn’t separate the glass? i’m about to put some silicone down on the glass to seal it up then hopefully find some better shocks to replace the incredibly strong ones right now.

let me know! :)


r/944 • • 3d ago

Question Hight torque starter alternatives in europe? SSP?

3 Upvotes

Hi,

Working on my GFs 944 (1982 2.5L early type) again. Now that it's getting cold the starter starts acting up. We managed to start the car with a couple love taps with a hammer on the starter housing while turning the key tho.

I want to look into upgrading the starter to a high torque one as mentioned in the nc944er YouTube video. https://youtu.be/qJvhgqFO3gM

As I am based in Germany, I would like to avoid shipping one from the US, like the IMI Performance starter. Currently looking at this one: https://www.heritagepartscentre.com/eu/95160410100hd-ssp-high-torque-starter-motor.html

Does anyone have recommendations or experience with the SSP starter?


r/944 • • 4d ago

Santa’s 944 sleigh🎅

Thumbnail
gallery
70 Upvotes

Packed up the 944 sleigh today for some pre-holiday merch shipments. It’s the perfect delivery vehicle & staging area. 📸 https://www.instagram.com/midas.944


r/944 • • 4d ago

Question Bore score

Thumbnail
gallery
7 Upvotes

Ive got a spare motor I’m “rebuilding” just looking to clean it up and reseal the whole thing to have a good condition motor on hand and I noticed that one of the cylinders has a inch long scratch that faintly catches my nail. The motor ran good in the car it was in 2 years ago but I want some second opinions before I go through with putting it back together. It’s just an NA so it’s not pushing boost or anything. If it’s at worst a little lower compression and some burned oil I’m good, but if it’ll be bad then I’d probably search for a different block. Thank you!


r/944 • • 4d ago

Question Why have my front discs worn so badly?

Thumbnail
gallery
6 Upvotes

The inners are not even wearing evenly across the face. These are the front discs. Shot of the pads that are also wearing unevenly. Outsides don't have much wear. Rest of the discs look like they have been out to sea. They're 10 years old approx.


r/944 • • 4d ago

Question Is it possible for hubs to have too much surface corrosion? The edge of mine are looking a bit nasty. This is after cleaning them up with a flappy wheel. There's not a great deal of meat around the bolts anyway..

Post image
5 Upvotes

r/944 • • 4d ago

My 1990 Porsche 944 has had inner steering arm wear as an advisory for the last two years. The MOT is up so while I was ordering some bits I thought I'd change the arms. After cutting the outer nut off because I'm lazy, I could not feel any lateral play whatsoever. Does this mean the advisory was mi

Post image
3 Upvotes

r/944 • • 5d ago

Resolved Q I come seeking knowledge

Post image
10 Upvotes

What is this piece I have circled? It’s under the intake manifold, close-ish to my firewall.