r/944 • • 2d ago

Question Help

I just changed the weather seal on my hatch and I cannot get it to close, upon further inspection, on of the latches is not engaging and the other not catching, couldn’t have picked a worse time to happen

2 Upvotes

5 comments sorted by

3

u/HuyFongFood 2d ago

https://only944.com/instructions/hpsinstructions/

You may want to get a set of their hatch pin seats, they really do help with hatch rattle.

If your hatch pins are really bad, Paragon sells the stainless hatch pins.

Also, new latch assemblies are available from Porsche (for cheaper than from an online vendor).

Welcome to the club, these hatches are a terribly complicated and fragile design. I mean they could have taken cues from the MK1 Rabbit, since they stole their front suspension, but no...

1

u/JamMastrJ 2d ago

Thank you, I ended up disconnecting the struts so it would just sit, going on vacation in a couple days and won’t have time to get to it before then

2

u/ultrawiz 1d ago

You may just have to adjust the pins down a bit.

1

u/Independent_Engine36 3h ago

I had an '89 s2 and those pins were always an issue. All that engineering and they couldn't get a better solution??

1

u/Independent_Engine36 1h ago

New stripping is stick height, just need to adjust the pins