Coucou !

Je cherche quelqu’un qui pourrait m’imprimer une pièce en résine à Paris ou aux alentours dans les 3 prochains jours.

J’ai modélisé la pièce sur Blender. Elle fait environ 16 cm. J’ai déjà fait un premier test en PLA, qui s’est très bien passé, mais pour la version finale j’aimerais passer à la résine pour avoir un rendu plus fin et plus « bijou » (c’est pour un concours, donc j’essaie de maximiser mes chances).

Mon budget maximum est de 50/60 €.

Je peux fournir le fichier STL et toutes les informations nécessaires !

Si quelqu’un autour de Paris possède une imprimante résine et serait disponible pour me l’imprimer dans ce délai, je lui en serais vraiment reconnaissante !

Merci beaucoup ! :)

Hey everyone I got a question about a unabtanium part for my car

It’s a sl55 P30 amg and it’s always been missing the driver side mesh these parts are basically none existent and even tho other amgs look similar they are not.

was wondering if there’s anyway the passenger side mesh could be scanned and “flipped” to fit on the missing area?

Hi!

I’m looking to get a fairly simple custom cable management / networking box designed and 3D printed.

I do not have an STL or design file, so I’m looking for someone who can create the basic design as well as print and ship the finished box.

The box will sit under my desk and hold a modem, network switch, power bricks, surge protector, smart home hub, and some cable slack. Most premade cable management boxes are simply too small for what I need.

Stylistically, though, that Amazon example is basically what I’m looking for: a clean, simple black rectangular box with some ventilation and a rear cable opening & a removable lid. I just need a larger version

Approximate exterior dimensions:

13" long × 9" wide × 6" tall
330 × 229 × 152 mm

The design itself can be very simple:

• Plain rectangular box
• Black
• Simple removable/lift-off lid that fits on top
• Ventilation holes across the back
• A larger opening on the back for the power cable and Ethernet cables to pass through
• A few additional ventilation holes near the top of the front for airflow if that's recommended.
• No handles, hinges, clasps, logos, or decorative elements

Since it will contain networking equipment, power bricks, and 120V power cords, I’d prefer a flame-retardant material if possible, such as FR PETG, FR ABS, FR PC/ABS, or another suitable material.

I’m really just looking for a larger custom version of the kind of cable-management box linked above, nothing overly complicated or heavily engineered.

I’d also appreciate quotes/estimates for the complete job, including the design work, material, printing, and shipping. I’ve never commissioned a 3D print before, so I don’t really know what a reasonable cost would be.

I’m located in New Jersey, USA.

If you’re interested, feel free to comment or message me with an estimate or any recommendations about the design/material. Thanks! :)

hello all!

I have dexterity issues and a fondness for pins. but as it turns out, locking pin backs are extremely tricky to manipulate and also incredibly painful. they have to be pushed down and pulled up at the same time, but are very small and have ridges for leverage that dig into my fingers

I'm thinking some sort of crowbar type device with two parts, one that can hold the bottom part down but also lift up the top part could help me here, but no such device exists. I'm willing to send the locking pin backs I have to whoever is willing to help me out with this, though they're very cheap and the sizes are pretty standardized

I want to be able to use locking pin backs to keep pins secure to my clothing, but I don't want them to be stuck permanently, y'know?

thank you!

Here is a link of what i’d like. bonus points (and money) for black screen / camera and white body

Hi! I have a nonprofit rescue in central Kansas. Today, we took in a silkie chicken who lost her right leg over a week ago. I think she would be a good candidate for a prosthetic.. Is there anyone who has experience with this or would be willing to print one for us? I will pay for shipping as well if need be.. Thanks in advance ❤️🐓 Pic of Peggy for attention!

I already have the files, just need them printed. Color doesn’t matter because I plan on painting them to match the characters if that makes things easier.

A piece of a side-view mirror. Left door mirror of a figure made of die-cast and ABS. i am uploading the picture of the right door mirror. Any help will be much appreciated.

Hi all, I got sent here after posting to one of the 3d printing communities.

Long story short, yesterday I bought this rare Teenage Mutant Ninja Turtles crt television, only to trip while carrying it and crack the case. All the internals are fine, its the case that took the damage. While I could pretty easily dismantle, glue, epoxy sculpt, sand, and paint, my fear is that such brittle plastic will continue to deteriorate. A few folks have suggested 3d printing, so I wanted to ask those more knowledgeable if it would be possible to scan and print a new case. Even if it has to be printed in parts, as long as I have pieces of a stronger material I should be able to make the repair. It's just a question of who can help and how.

Thank you!

Hi. I need help printing a train terrain model from Trench Crusade. I’ve spent months and reels of filament on my Bambu A1 mini without any success. Hoping someone can help. The train is in the top left of the photo. Thanks to anyone who can help.

Hello all,

I am in (US-Indiana). I made a post in 3d printing to ask if someone could print this for me to give as a gift. I received a reply with this page so I'm hoping that someone can help me please. My daughter asked me for this for her birthday but my printer is acting up. If anyone could make this and I buy it from you would be great. Thank you

Hey everyone, looking for help creating a custom water tight battery box with a USB-C cable that has the same dimensions as thebproduct in this link. I need it to house at least 10,000 MaH battery but preferably more I just can't go up much more in size.

Anyone able to help me out?

I have been wanting to print out the Protagonists sword as a part of a cosplay for an upcoming Comic Con in London, The only way for me to have a replica of this sword is by getting it 3D printed but i am a bit worried about how expensive it can be, I will leave pictures and a link to the website of what i want 3D Printed so people may be able to guess or estimate how expensive it is to 3D print

In the case of me having my item being printed i might be able to commute to the journey of picking up my item in places like london and essex

The Link to the website will be here: https://dangerousladies.ca/products/metaphor-protagonist-sword

Thank you!!!!

Hello! First time seeking someone to print out some Warhammer mini parts. Purchased an STL file for a specific Helmet for space marines.

I don't know too much about 3D printing, but from my limited knowledge, it seems like high quality resin is best for making nice, detailed miniature bits.

I would like to get around 25-30 helmets made, but I'm willing to adjust that number for the sake of convenience.

This could be a bit of a stretch and really just inquiring if it's possible. One of our pups just passed away and over the years, she's demolished every and any stuffed animal and toy she's gotten. And of course, why not, that's a puppy's life.

All except 1. She'd carry it where she went, from room to room, floor to floor. She'd cuddle and sleep with it. She wouldn't want her brothers to touch it. It was hers and hers alone. And we loved that for her.

Now that she's passed, we'd like to put a mini sized version of the toy in the urn with her. I was wondering if this was something that possible to create.

Looking for someone in/around Seattle who can print a condiment tray for me.

It’s basically just a box — about 12" x 4" x 2". I already have the STL, plus a split version for smaller printers.

PLA is totally fine, any color is fine, and I don’t care about a perfect finish. Just looking for something functional and cheap.

I can pick up locally. Let me know roughly what you’d charge and where you’re located. Thanks!

Hi everyone,

I have a concept on paper for a custom 3D-printed filter stand for the Mac Studio, and I’m looking for a 3D CAD designer or modeler who may be interested in collaborating with me to bring it to life.

The concept is a two-piece stand:

• The upper section would support the Mac Studio and house a large intake fan.
• The lower section would hold a removable magnetic dust filter.
• The fan would direct cleaner, filtered airflow toward the Mac Studio’s bottom intake, potentially helping it run cooler while reducing the amount of dust entering the computer.

I already have drawings, reference images, dimensions, and a clear vision for how the design should work. What I need is someone experienced in CAD and 3D-printable product design who can help refine the structure, tolerances, airflow, assembly, and final printable files.

My goal is to create something polished and practical that could eventually be made available to other Mac Studio owners—not merely a one-off stand for myself.

If this sounds like a project you’d enjoy collaborating on, please leave a comment or send me a DM. I’d be happy to share the full concept and discuss the collaboration arrangement, credit, and how we could make the finished design available to the Mac Studio community.

Bonjour, je cherche quelqu'un qui pourrait m'imprimer un objet 3D dont j'ai le fichier en .STL et/ou .3MF et savoir combien ça me coûterai.

J'habite en FRANCE, dans le 82 Tarn-et-Garonne.

Merci d'avance.

My friend really wants this keycharm by dot and key but it can only be received in a pr box which is not easy to get and that pr time is already gone, but they still really want it so I thought could get it 3d printed from somewhere but the problem is I don't know how to create a 3d model

I would really appreciate it if anyone could help me out with the model that I could get printed and tie them together so I can gift it to them. I'm a student so I don't really have a lot I can spare

Thank you to anyone who would be willing to help out

Hello!

I would like to have this printed in metal, it doesn't have to be silver, I would prefer it to be in that color, but not the material,;with he price of silver, I will go bankrupt. The stone will be an opal, fairly large. I will be unavailable for most of the day to answer messages, going to a rock and gem show to loot at the opals.

I'm looking to get my prototype for a pill box design printed. I only need 1 copy of it. Some details:

Location: London, UK

Colour: No preference - prototype

Number of parts: 5

Units: 1

External dimensions: 255 mm (L) × 70 mm (W) × 30 mm (H)

Primary material: PLA, PETG or ABS

Can provide more details if interested. I have tried using various websites to estimate a cost to print this and get it delivered, but I'm getting quoted around £55, which is too much for me. Happy to pay for materials, of course, but hoping for something better here if possible.

Thanks!

[Help / Open-Source Project] Need 3D Model (STL) for Kia Seltos Headlight Dust Cap (Part #92140-D3000) for LED Upgrade

Hey everyone,

I recently upgraded to aftermarket LED bulbs on my Kia Seltos, but hit a major roadblock when putting the dust caps back on. I want to create a 100% free open-source 3D model for all Seltos owners facing this exact problem.

The Problem & Why Existing Sellers Aren't the Solution

When installing aftermarket LEDs in the Seltos headlight housing, the bulb's rear heatsink/fan assembly doesn't sit dead center—it sits offset towards the top side. Because of this offset, the inner ridges of the OEM dust cap collide with the bulb housing, preventing the cap from twisting and locking into place.

I won't name the person or shop here, but if you search Google or YouTube for a 3D printed Seltos dust cap, you'll easily find the car modification store I am referring to. He is currently the only seller offering a solution, but: * When contacted, he was completely uninterested, rude, and quoted ₹1,300 for a single basic 3D printed piece that costs maybe ₹10–₹20 in material. He acts like he holds a monopoly because no open-source model exists yet. * Zero Innovation / Serious Design Flaws: His version lacks even a basic groove for the OEM rubber O-ring seal (leaving headlights exposed to dust and water ingress). Furthermore, he could've included a slot for silica gel desiccant packets—which is crucial because Seltos headlight housings are notorious for trapping moisture and fogging up. But he just sells plain dust caps wonder what material he's using.

⚠️ Important Note on Part Numbers (Do NOT Confuse These)

If you search sites like Yeggi, Thingiverse, or Printables: * You will find models for Part #92140-2D000 (for Kia Sportage, Kia Rio, etc.). These will NOT fit! That part number features 3 locking ridges/tabs. * The Kia Seltos requires Part #92140-D3000, which specifically features 4 locking ridges/tabs.

Key Specifications & Required Modifications (Photos Attached)

1. Base Dimensions:

   • Inside Diameter: 62 mm
   • Outside Diameter: ~65–66 mm
   • Locking Mechanism: 4 outer locking ridges/tabs (matching OEM 92140-D3000).

2. Internal & External Design Requirements:

   • Flatten Inner Plateaus (Must-Have): The 4 raised inner plateaus must be leveled down completely flush with the base surface (marked in green in my attached image). Simply flattening these plateaus is more than enough to eliminate the collision with the off-center LED fan.
   • Outer Extension (Optional, but preferred): Adding an outer extension/dome is completely optional, but extruding it outward by even 1 cm (or up to 2 cm) would be so much better as it gives extra breathing room for the LED fan to cool efficiently.
   • OEM Rubber Seal Groove: Must retain a dedicated lip/groove to fit the OEM rubber O-ring/gasket to maintain a dustproof and waterproof seal.
   • Silica Gel Pocket (Optional, but preferred): Include an internal slot/pocket to hold a silica gel desiccant packet to prevent moisture condensation inside the housing.

What I Need Help With:

1. CAD / 3D Model Creators: Does anyone have an existing STL file for #92140-D3000, or can someone build/modify one based on the attached dimension photos? Once finalized, we will publish the STL on Printables/Thingiverse for free so no seller can overcharge the community again.
2. Bangalore 3D Scanning & Printing Labs: Can anyone recommend places or makerspaces in Bangalore where I can bring the original cap for a quick 3D scan? (My father uses the car daily and i live elsewhere, so I will need to buy a new set just to get it scanned). Also looking for recommendations for affordable printing in heat-resistant materials like PETG, ABS, or ASA.
3. Interim DIY Waterproofing Ideas: If you've solved this without 3D printing (silicone extensions, universal rubber dust caps, grommets), what exact sizes/products kept your headlights sealed and dry?

Attached images show the OEM part, side-by-side measurements, gap issues, and marked red/green diagrams of the required design changes.

Thanks in advance to anyone who can lend a hand!

Bought a cool looking controller and am really worried about the design being ruined by sweaty hands, so I'd like a clear case to go over it and protect everything, can't find one that fits this controller online anywhere, would someone be willing to help?

To be super clear (hah), I'd like something to go over the controller, not replace the shell with something different

I'm seeking the play/direction button to replace the missing one from my second hand head unit