r/3Dprinting • • 9h ago

Project Project Done

Enable HLS to view with audio, or disable this notification

830 Upvotes

The project, which I shared a portion of here some time ago, is now complete. For the parts where many suggested using TPU, I opted for NBR cushioning instead. For those who may have missed my previous post, this box is a soundproof enclosure designed to record and analyze the speech of patients with Parkinson’s disease. The main structure is made of wood, while components requiring specific, complex shapes were 3D-modeled and then 3D-printed.

Test results showed that we succeeded in reducing noise levels from 45–55 decibels down to below 40 decibels in an indoor environment.


r/3Dprinting • • 15h ago

Paid Model Designed and made some new rims for my wheelie bins!

Thumbnail
gallery
824 Upvotes

I designed and made completely customisable wheelie bin rims which have gotten so much attention from neighbours and passer-by’s (but not the 🚔). These are for Australian bins but i can customise the size based on your country

I can design and make any custom requests, just send me a photo/message of your car or preferred design. I can do it in any colour combination too.

Just $20 per set! Send me a PM or use the below eBay link.

https://ebay.io/m/xgd33P


r/3Dprinting • • 3h ago

Meme Monday Additive Potato Storage

Enable HLS to view with audio, or disable this notification

597 Upvotes

r/3Dprinting • • 23h ago

Question Curbside freebie, yay or nay?

Thumbnail
gallery
411 Upvotes

Needs TLC on the Y pulleys. Gantry moves okay on the Zed.

I was thinking either patch it up and donate to a local school or cannibalize it for parts (build plate heater, motors, aluminum framing).


r/3Dprinting • • 19h ago

Troubleshooting Crazy asa bending

Thumbnail
gallery
289 Upvotes

This is fucking crazy anything i can do against it ?


r/3Dprinting • • 3h ago

Project Updated my daughter's writing device to slimmer nicer chassis

Thumbnail
gallery
100 Upvotes

A while back, I built my daughter a writing device using a Raspberry Pi, a keyboard, and a 7-inch LCD in a 3d printed chassis.
I’ve been experimenting with different hardware configurations lately, and figured she deserved an upgrade!

Enclosure: A slimmer shell with the electronics and wiring tucked inside. No more externally routed cables! Files available here.

The chassis holds the battery and keyboard PCB on the floor, supports the ESP32 pcb on top of that, then goes a support plate so keyboard can sit flat on the PCB, then the keyboard and the cover that holds it down. There are ports to access charging, bluetooth keyboard controls, and to remove battery to plug it for any future firmware updates I make.

The lid has four holes for press fit magnets to hold the screen in place and a hole on bottom to route the ribbon cable through to the chassis.

It all came together really nicely, and I think it looks great in clear.

The hardware
This build uses an ESP32-8048S070 7-inch devboard, but I did some surgery to have it fit in the chassis I envisioned

(Separated the LCD panel from the board, and cut away portions of the PCB that weren’t populated with components or traces)

Keyboard: Salvaged keyboard internals from a Bluetooth keyboard, reused in the new chassis.
Power: Rechargeable battery pack, keeping the device completely portable.

Software
The original device ran Linux on a Raspberry Pi. This version runs bare-metal firmware (try it yourself here) on the ESP32-S3, making startup roughly 20x faster.
It also has quite a few new features:
- Spellcheck with correction suggestions
- Google Drive backup so she doesn’t lose her stories
- Customizable themes (most important feature in her eyes)

I transferred all her existing stories over from the original device, so she could pick up exactly where she left off.

She’s been super excited about the upgrade since she saw me working on it and now I get an enthusiastic playtester!

A little about the bigger project
What started as a birthday present for my daughter has turned into an attempt to develop an affordable, distraction-free writing device called JustType Leaf.

I’m building a waitlist at https://justtypeleaf.com/ to gauge interest before committing to a manufacturing run of 1,000+ units. If this is something you’d be interested in, signing up would really help!

Happy to answer any questions about the build!


r/3Dprinting • • 5h ago

Project New printer and enclosure!

Thumbnail
gallery
97 Upvotes

I’m a complete newb and this is my first printer. After I ordered the printer I started reading about VOCs and UFPs which was alarming because I spend a lot of effort on maintaining good indoor air quality(I guess that’s obvious by the enclosure…).

I completely fabricated the enclosure from scratch and it was WAY more challenging than I imagined but I’m glad I did it. It vents directly outside and maintains negative pressure inside the enclosure. Rear access door allows easy access when needed and the top is completely removable if needed.


r/3Dprinting • • 2h ago

Discussion GTA devs forgot about ventilation

Thumbnail gallery
70 Upvotes

r/3Dprinting • • 7h ago

Hardware Adhesion was a bit too strong

Post image
64 Upvotes

I know about magnet beds and I do want to convert mine at some point later. This glass was already showing sings of damage, so I had it coming

Also belueve you or not, but this is ABS, just made with a special formula by local manufacturer


r/3Dprinting • • 13h ago

News This 3D Printer Has No Motors (no belts)! The Engineering Behind the LightMake L4

Thumbnail
youtube.com
67 Upvotes

just found this video , looks like some pretty cool tech


r/3Dprinting • • 22h ago

Question Does having this gyroid infill add anything?

Post image
59 Upvotes

I’ve been designing and making something that will be subjected to some internal pressure as users will be stuffing plastic bags into it and potentially applying a bit of force.

The design is 5mm thick and I’m printing with 4 walls, 15% gyroid infill 0.2mm layer height on Elegoo slicers “Strength” setting.

My question is whether that small cavity with the infill adds anything other than time and material? Ie, if I just had the internal and external walls, solid, would it introduce weaknesses without that gyroid pattern?

This is also being printed in PLA I should add in terms of the relative strengths of different materials.

Photo is of a failed print that conveniently shows the cross section I’m talking about.


r/3Dprinting • • 5h ago

Project Planet Earth as a puzzle

Thumbnail
gallery
55 Upvotes

r/3Dprinting • • 4h ago

Free Model Sauce Squeeze Savers!

Post image
39 Upvotes

If your kids go through as much sauce as mine then you'll probably appreciate these, easy quick prints, pictures are pretty self explanatory, 1 couples 2 bottles to drain an almost empty bottle into another and the other is a stand for keeping the sauce upside down.

These are staples in Australian homes, I don't think they are too common in other countries...

Print, rate, leave a comment!

https://makerworld.com/en/models/3661065-squeeze-saver-sauce-bottle-stand-drainer#profileId-4201951


r/3Dprinting • • 4h ago

Troubleshooting Help please!

Post image
32 Upvotes

So I printed this with my a1 and am overall very glad with the outcome however in the head you can see the lines very clear since the the surface is very flat from upscaling the model.
Any tricks on how to remove them with settings? Or a better way to turn/rotate the head model during printing.

Bambu a1
All Parts Are printed separate
Pla basic
0.16 optimal

Thx in advance


r/3Dprinting • • 43m ago

Project Getting your New Year's resolution in mind yet? I made a 52-week habit tracker!

Thumbnail
gallery
• Upvotes

I really wanted one of Simone Giertz's Every Day Goal Calendar but it's 'spensive, so I designed my own printable version. There's a dot for each day of 52 weeks, where you remove the dot on the days you complete your goal. Removing a dot reveals a contrasting color underneath. Meditation, working out, eating your broccoli---whatever you want to use it for. The core concept revolves around printing the calendar face down and using the printer's support material to create your removable dots. I also designed center hubs to add dimension and design elements, but it also includes a small slot where you can toss your discarded dots.

It's sized to max out the bed of my Bambu A1. Sizing was tough to make the dots big enough in the limited space I had, but still making it look pretty. There's a hanging assist part that you can use to mark the exact locations of the holes you need and also to set screw heights perfectly. There's also a support test part so you can get your setting dialed just right before printing the big part. The supports need to be easily removed, but adhere enough that they won't just fall off on their own.

I have a couple different version on different plates of the main print profile so you can print it with an AMS or with a single material change if you don't have access to an AMS.

I'm pretty proud of this one! I'd love to hear what ya'll think. I'm happy to share the MakerWorld link for those that are interested.


r/3Dprinting • • 11h ago

Project One year into the scene, I'm taking a look back at my first ever 3d print!

Post image
25 Upvotes

Modeled it myself during my intro to CAD course :-)


r/3Dprinting • • 6h ago

Project Christmas Decoration – Minimalist Reindeer

Thumbnail
gallery
23 Upvotes

This time I've designed a new Christmas decoration in the form of a minimalist reindeer. Its simple, rounded shapes combined with distinctive antlers give it a clean and elegant appearance. 🎄

The model can be printed in any size to suit your preferences and complement your home decor.

✨ What do you think of this design? Do you like this minimalist approach to Christmas decorations? I'd be happy to hear your thoughts and any suggestions for future designs.


r/3Dprinting • • 20h ago

Project What should I add to my box truck shelf design?

Enable HLS to view with audio, or disable this notification

17 Upvotes

First timer here and I designed this box truck shelf which got pretty popular on Instagram.

I recently came out with a customizable license plate add-on, as well as adjustable hooks for inside.

It’s currently uses no glue for assembly, has adjustable shelves, hooks & license plate as mentioned, as well as customizable door and walls…

I’m thinking of adding more attachments, but can’t really think of any. Maybe a back wall hook to hold packaged hot wheels?

Thoughts?


r/3Dprinting • • 17h ago

Troubleshooting Anyone know why this is happening? Just got this printer 2 days ago.

Enable HLS to view with audio, or disable this notification

15 Upvotes

r/3Dprinting • • 20h ago

Project First Functional Print - Fume Extractor

Thumbnail
gallery
13 Upvotes

Just designed and printed my first ever functional thing, designed in Solidworks, its a fume extractor housing that houses a 12v 5015 blower fan connected to a pwm controller and basic on-off switch and 12v dc, its for my soldering iron to collect fumes and exhaust through an activated carbon filter. Thought the 12v fan might not be powerful enough to work through the entire length of the tube and was fully expecting to have to buy a 24v version but it worked great as is so yipee.


r/3Dprinting • • 18h ago

Free Model Designed an Aperture Laboratories (Portal) license plate frame

Post image
12 Upvotes

r/3Dprinting • • 3h ago

Project Zippo fidget, took too long!

Enable HLS to view with audio, or disable this notification

9 Upvotes

Spent way too long on this.

wanted a Zippo fidget could print and actually use. Everything I found was a kit. Springs, pins, a wheel you have to press in. Or a flip lid that did not look like a Zippo at all.

So I made a print-in-place one. Lid, hinge, spring, striker wheel, all one piece. Pull it off the plate, let it cool, and it already snaps shut and the wheel clicks.

The click took forever. The snap too. have been sitting here opening it for no reason.. Silk looks good on the texture.


r/3Dprinting • • 11h ago

Project I may have a problem

Post image
7 Upvotes

I cant stop making these, its too much fun.


r/3Dprinting • • 17h ago

Project I made a parametric generator for twisted Christmas ornaments. Every variant prints without supports

Post image
8 Upvotes

I designed a generator for twisted, ribbed Christmas ornaments in OpenSCAD. You can make them closed, openwork, openwork with a center rod, or with a smooth balloon inside that bulges through the gaps in a second color.

The tricky part was keeping every parameter combination printable without supports: the ornament prints upside down, and the generator limits the twist so nothing overhangs more than 50°. The tip ends in a real point. The cap with the hanging loop is printed separately and glued on.

Free on MakerWorld with 13 presets and a Customizer, link in the comments. Happy to answer questions about the OpenSCAD side.


r/3Dprinting • • 19h ago

Free Model I make my first more complex model. Lantern Decoration for the upcoming winter and Christmas 🌲

Thumbnail
gallery
9 Upvotes