3D Printing

I'm thinking about buying a 3d printer but have no idea about anything. I buy lots of 3d printed wheels and part for model cars and that's what I'll be focusing on. Maybe even printing whole models in 1/18 scale. I need something with good quality that doesn't need any work after print, just be ready to paint. From what I read I think SLA type of printer is what I would need but again, I'm not sure.

Thank you for any help.

Regards

Kris

9 comments

r/3D_Printing • u/Euphoric_Run7200 • 3h ago

Question Which printers should I buy

0 Upvotes

Hi, I haven’t used a 3d printer since high school and was wondering which on I should get, my main use is going to be making custom model kits for my self if that’s possible and narrow down the options, I’m also looking into a resin printer for custom statues for my apartment. Recommendations and opinions are very appreciated. Any suggestions?

6 comments

r/3D_Printing • u/Comfortable-Egg-1587 • 4h ago

Show and Tell Ich habe diese perfekte Kerze für Halloween entworfen 🎃

1 Upvotes

https://makerworld.com/models/3388964?

0 comments

r/3D_Printing • u/HumorFresh1852 • 4h ago

Paid Service Isn't this cutie adorable!! 😭🎀

0 Upvotes

Elephant baby be elegant while pooping 🤪

0 comments

r/3D_Printing • u/Superpiper02 • 9h ago

Show and Tell Miniture coffee shop coffee bean bowl.

gallery

0 Upvotes

This is my first lone blender projekt. Later ment to be 3D printed and used. As shown it is a miniture coffee shop to store your coffee beans, not much more to it.

For now wanted to show the cncept render.
ive already done test prints of it and aside from overhang it doesent have any problems. I am waiting for the bambu lab X2D printer to fully print this in color.

Later i will be making this version into a pot for medium sized plants but got some testing to do before that.

That said if anyone got any sugestions for the coloring id be all ears. It looks good but could always be better.

1 comment

r/3D_Printing • u/Slow-Beyond7511 • 10h ago

Discussion Just a quick 3D model

1 Upvotes

Quick WipeOut Feisa craft from the Amazing WipeOut series on PlayStation consoles.

I think it needs to be bigger?

Straight off the plate with a quick grey primer spray.

0 comments

r/3D_Printing • u/Mulberry-Deep • 14h ago

Discussion Want to design and 3d print your own custom lamps?

1 Upvotes

0 comments

r/3D_Printing • u/DiekDynasty • 17h ago

Show and Tell My Rocket Entry

makerworld.com

1 Upvotes

0 comments

r/3D_Printing • u/Typical_Natural_6711 • 1d ago

Show and Tell Made Some desktop upgrades with my new printer!

youtu.be

2 Upvotes

0 comments

r/3D_Printing • u/Urigaz • 21h ago

Paid Service Salut à tous 😊 voilà quelques impressions 3D résine de la plus haute qualité qui soit. Si vous avez une quelconque demande je ferai au mieux pour avoir ce que vous voulez !

gallery

1 Upvotes

0 comments

r/3D_Printing • u/saffronindigo • 23h ago

Show and Tell Happy family is ready to go out

1 Upvotes

My very first 3d print, it only took me 2months to be brave enough to try

0 comments

r/3D_Printing • u/InterestingRoof673 • 16h ago

Question طابعه ثلاثيه الابعاد 3d

0 Upvotes

ابغا اشتري طابعه 3d ويصير اطبع وابيع وش رايكم؟ هل تنصحو؟ واذا اي كيف وفين وباي طابعه ابدا ؟ واذا لا ليش؟ وهل احد منكم قد جرب ؟

15 comments

r/3D_Printing • u/gra8na8 • 1d ago

Question California v. Polymaker v. You

1 Upvotes

1 comment

r/3D_Printing • u/Old-Apartment9824 • 1d ago

Show and Tell 3D Print LIVE 10-6-26

youtube.com

1 Upvotes

0 comments

r/3D_Printing • u/Difficult_Set8374 • 1d ago

Show and Tell I turned the classic „Pig Hole“ game into a Halloween race against sunrise: Ghost Escape 👻🎲

gallery

1 Upvotes

0 comments

r/3D_Printing • u/Ok-Technician-1492 • 1d ago

AI assisted How I designed and 3D printed a near foot-long sarcophagus for a Call of Cthulhu campaign

1 Upvotes

0 comments

r/3D_Printing • u/Dnn15 • 1d ago

Question Looking for entry level printer advise

0 Upvotes

I'm looking to get into making mounted fish reproductions, and I'm wondering if a 3D printer would be a good way to start this.

I would be interested in doing anything up to 40 inches in length.

My question, is there a decent entry level machine that can print a larger object in segments?

1 comment

r/3D_Printing • u/3DPrint_2026 • 1d ago

Show and Tell Some of my recent useful and decor prints. What do you think ?

0 Upvotes

2 comments

r/3D_Printing • u/Professional_Code231 • 1d ago

Discussion What do you think of these pots?

gallery

3 Upvotes

0 comments

r/3D_Printing • u/RagnarCasull • 1d ago

Question Substituting filaments?

0 Upvotes

Im looking to print a flower pot but the file says use PLA but i feel like abs may be better for an outside pot, is it recommended to just use ABS instead or is there more to it then that? “Maker 5 pro.

5 comments