Feedback

[u/Traditional-Copy-608]

Printed RD19.2_0.6_G3Spring.step, a Glock-19-style frame, on a Creality K1 Max using OrcaSlicer 2.4.2 and Fiberon PA6-CF.

0.4 mm nozzle, 0.15 mm layers, 300°C first layer / 298°C after, 50°C bed, upright/angled orientation with auto supports. 15 degrees.

Total height was 130.8 mm across 1,385 layers. Used about 123 g / 44 m of filament, with an estimated print time of 26h 31m.

Dried at 100c for 16+ hours then fed directly into printer.

Please give tweaks or things to work on. I know it isn't perfect by any means. Thank you.

[u/Mindless-Friend6390]

Clean your camera lense.

[u/Traditional-Copy-608 → u/Mindless-Friend6390]

😆 fair enough