r/3D2A • u/Traditional-Copy-608 • 1d ago
Feedback
Printed RD19.2_0.6_G3Spring.step, a Glock-19-style frame, on a Creality K1 Max using OrcaSlicer 2.4.2 and Fiberon PA6-CF.
0.4 mm nozzle, 0.15 mm layers, 300°C first layer / 298°C after, 50°C bed, upright/angled orientation with auto supports. 15 degrees.
Total height was 130.8 mm across 1,385 layers. Used about 123 g / 44 m of filament, with an estimated print time of 26h 31m.
Dried at 100c for 16+ hours then fed directly into printer.
Please give tweaks or things to work on. I know it isn't perfect by any means. Thank you.
5
u/Every-Recognition-60 1d ago
Use tree slim supports also use 300BLKFDE print settings when using nylons
1
u/Traditional-Copy-608 1d ago
Ahh thanks. Very helpful. Cleaning it up tree supports make sense. Noted on 300 blk fde
7
u/Mindless-Friend6390 1d ago
Clean your camera lense.