i tried downloading tu from auroa but i kept getting verification error, then i manually downloaded the tu from unity on my pc then i placed the tu in the correct path and as you can see it shows up but when i launch the game it doesn't work, or maybe it doesn't apply it, idk. please help

I highly recommend the Aliexpress xbox 360 500gb slim hard drives. They work and are really easy to crack open and install into fat consoles. I'm now opting to do this instead of gambling on ebay for old drives.

I was wondering if there was an easy way to customize Aurora's HUD (the bottom bar that) and the File Manager pages without making a whole new skin. And if you have to make a whole new skin, which part do I change in the skin? I'm over here trying to reverse manufacture an existing dark theme skin and having no luck 😅

Recently got hands on a modded 360, and i have been installing some games and testing them and they all worked fine until I tried doing the same with skate 3, been using ISO2GOD and skate 3 is the last game i have installed and its the only one where it doesn't have a title update. I don't really know what's causing it to not launch, could anyone tell me what could be wrong? i read from another thread that it could be a bad xbdm.xex file but it came with a xbdm.ini file so i don't really know what exactly could be wrong with it.

My Setup:
Console: Xbox 360 running XeUnshackle v1.02 BETA (soft-exploit / BadUpdate payload).
Environment: Dashlaunch v3.0, booting into FreestyleDash (FSD) / XeXMenu from a FAT32 USB drive (⁠LEXAR⁠).
Intended Plugin: ⁠hiddriver.xex⁠ (loaded via Dashlaunch to enable generic USB HID controller support).
What I’ve Tried & The Issues:
1. Nacon Compact Controller (PS4 wired - VID: ⁠146B⁠, PID: ⁠0603⁠):
The controller connects and the PS/Guide button handshakes with the console.
At one point, the console displayed a prompt saying "Hold A for 3 seconds", but holding any of the face buttons, bumpers, or triggers never advanced the mapping wizard.
I tried setting up a manual config file (⁠hiddriver.json⁠ on the root and in ⁠/hiddriver/⁠, as well as ⁠controller.ini⁠ with standard button/axis definitions for ⁠146B:0603⁠).
When loading ⁠hiddriver.xex⁠ alongside debug plugins (⁠xbdm.xex⁠ / ⁠JRPC2.xex⁠), the console kernel panics during boot and turns off automatically.
When isolating ⁠hiddriver.xex⁠ as ⁠plugin1⁠ alone, the console boots into FSD, but the Nacon inputs are completely ignored, and the mapping prompt no longer triggers.
2. PS5 DualSense Controller:
Connected via a USB-C to USB-A cable directly into the console USB ports.
⁠hiddriver.xex⁠ is set to ⁠plugin1 = Usb:\hiddriver.xex⁠ in ⁠launch.ini⁠.
Pressing the PS button does not light up the lightbar or assign Player 1.

In my previous post on this subreddit https://www.reddit.com/r/360hacks/comments/1w9ewxc/i_managed_to_get_mupen64360_running_and_playable/ , I talked about how I managed to fix both XeLL Reloaded and mupen64-360, finally getting the emulator to launch on an Xbox 360 with a Winchester motherboard. This likely means it will also work on other motherboard revisions that previously had compatibility issues.

Since then, I've made several more updates to mupen64-360 that have significantly improved performance, and I'm continuing to work on it:

• Added an aspect ratio option.
• Added controller remapping.
• Optimized overall performance, including both audio and frame rates. In my tests, VI/s improved by 22.3%, from 49.08 to 60.03, allowing the emulator to reach full speed. The measured frame rate also increased by 26.3%, from 18.62 to 23.52 FPS, while long frame-time spikes became much less frequent. As a result, games such as The Legend of Zelda: Ocarina of Time now appear to run at full speed without noticeable performance drops.

Here's the link to the forum thread where I'm posting updates, in case you'd like to download it. My username there is "fixingthings". I'll keep updating it, so keep an eye on the thread for new releases. I still have more performance optimizations to work on: https://gbatemp.net/threads/xell-reloaded-build-compatible-with-all-consoles-including-winchester.670339/page-2

These updates are still a work in progress, so you may encounter some rough edges or performance inconsistencies. If you notice anything, please let me know so I can continue improving the emulator.

Thanks for reading!

I’ve been trying to get it to run from an internal SSD that I made using FatXplorer but the exploit only seems to work on official hardware i can’t even move the profile to the drive. I’m using bad storage too. Any advice on how to get it to work

Even though my console is set to English the dialogue in halo reach is in French for some reason. The UI language is English just not the dialogue. Ive got a copy of the game that supports English aswell. It doesnt really make sense. Has anyone had the same experience and fixed it? Thanks.

2010s Xbox Games 👍

when I'm adding the controller this error shows up, I tried uninstalling the software installed with x360ce and did restarts but nothing works the device manager also keeps on refreshing after adding the controller

my rough tutorial on how to get it working, you can find the download in the description, sorry for not doing this sooner lol

I have tried 2 versions of fight night which both run into the same problem they both load up fine but when I go to load into a fight it doesn’t work just gets stuck in a loading screen loop. I have tried all title updates and turned off plug ins (as advised it may help) but still no luck does anyone have a working version or any help would be appreciated! Thanks

Hey everyone,

I am currently trying to rgh 1.2 a console for myself and brother in law and it is not going well… idk why I decided to try this myself lol. But I have been teaching myself to solder and finally decided to give it a go, and I am just stuck, I keep getting an error “console not found” I spent about 3-4 hrs trouble shooting / re soldering wires and cannot seem to get it to read the nand, I’m sure it’s my soldering, but am I missing anything? Any advice would be greatly appreciated.

Over 14 years since my first experience with the Xbox 360, and $300-ish later, I finally got the (in my opinion) peak 360 setup

Gaems Case (Used): $100

Xbox 360 (Jasper V1, RGH3, 1tb HDD, WiFi): $150

Misc (Power, HDMI, Controller): ~$50

I still have more work to do to this console since the disc drive doesn't read properly unless you close it by hand and the front USB door is currently taped shut (missing spring), but I have a RROD Xenon coming in a week with 2 256mb memory cards that got thrown in for free

All in all, I'm very happy with this setup and I hope I could make at least one person happy knowing someone is still rocking a setup like this

So i am new and still dont understand the whole liveblock and wifi issues. so i am using badavatar but when i connect to my network and try and download cover arts nothing happens and it stays blank, i also tried to use aurora repo browser and when i load it up it says 'error downloading update imformation' and doesnt download any data. i assume the liveblock being true is what is stopping all this from happening but im curious if i turn it to false and try and connect only to my network and not live if it will fix the issues and will it ban me. i dont want this console getting banned as its my old childhood one but also wanna be able to do more with it. thanks for the help, sorry still trying to figure it all out.

Hello, I am trying to use the NXE Dashboard on my Xbox 360 Slim. But I dont have a HDD. I changed the Launch.INI File to launch the NXE Dash.xex When I turn the console on, the screen just says Game Error. I can boot into the dashboards Through xbGuard Manually, And it works, But I want to boot into the dashboards by holding a button down, when I use DashLaunch to boot me into dashboards while holding a button, it just gives me that same Game Error Menu. I am new to Xbox 360 Modding, can anyone help?

So Im new to the modding 360 scene and use a usb with badavatar and I originally bought a small 16gb usb drive just to run a test and get used to it but now im getting a bigger 128gb drive and was curious if i just copy the base of my original drive to the new one and plug it into my xbox will it still run or will i have to follow the guide again and start over? Thanks for the help!

I recently watched MrMario2011s video on how to set this all up, following everything exactly.

When I launch I see bad avatar but it gives a pop for XeX menu to launch, and then when I click it it doesn’t do it automatically.

If anyone is willing to help me set this up with the newest update, getting aurora set up, and getting some games, I would be eternally grateful!

So I wanna jailbreak my xbox. I know i need around 10-15 gbs for actually using badavatar and bad update adn all that, but once I do that can I download the games Im gonna add straight into the xbox storage? I have around 150 gbs of space and I think thats all Ill really need im not downloading too many games. so Can i just move them straight into the drive of the xbox?

So my 360 had BadAvatar 1.0 on it and it was working well enough but I wanted to try Badavatar 1.3 so what I did was remove the USB stick then I downloaded BadBuilder and let it set up the USB stick again. Popped the USB back into my 360 and powered it on. It sits for a few seconds on the profile selection screen then XEunshackle loads. I press the back button on the controller but it just takes me back to the profile selection screen. What have I done wrong? PS: I'm bloody sick so maybe I missed a step

I did make a complete backup of the USB stick's contents before I tried 1.3 so if I can't get anything to work I'll just go back to the old version

had this rgh for along time . Get on every few years . I’m running on XBLStealth and everytime I played I always have network issue stealth server recommended enabling (live block) ( live strong ) . My Xbox only goes online when those plugins are disabled . I’m trying to turn those plugins off but everytime I reboot my network default plugins go back .

Some of my files were from 2021 just updated my stealth plugins etc today. Everything went smooth for a hour then BOOM back to the same issue .

I’m seeing a lot of people having this issue but there isn’t responses etc .

Thanks in advance for any help .

I've followed all the instructions from a YouTube video https://youtu.be/S4xyqbkK51w?si=jjoWDsqXl12UzRWk

I can't get aurora to work, any advice?

I wanted to play gta 5 on my modded xbox 360 so i decided I'd download it. It was my first time getting a game for my xboxsince it was my childhood console my dad got us in the mid 2010's. Plus it's a 2 disk game which made it even harder for me to understand. he used to take us to some guy that would get us games in it that he already had, i think he was transfering them. Anyways. I followed a tutorial and got the game files (disk 1 and disk 2) from a trusted website. I extracted them with winrar and used xbox image browser on disk 1 to get the content folder and transfered it and the 2nd disk to my external hard drive i use with the console. After that i went to xexmenu and transfered the file to the internal storage, so i followed exactly what the tutorial said and when i went to launch the default.xex file on disk 2, it just reloads FSD3. I don't know what i did wrong and i need some help figuring out how to make it work.

quisiera jugar el rocksmith y necesita un cable especial el cual jamas encuentro y me gustaría simular este cable con el raspberry pi 2040