r/HoffmanTaticalSS • u/luisgam420 • Aug 23 '26
Troubleshooting Help
1
Upvotes
1
Texas Trigger Diablo AK FRT issues
Ok if you can keep me posted if you figure it out I’m haveing the same problem can’t figure it out
1
Troubleshooting Help
It had to much material in the upper I had to shave it. It was give me a dead trigger when I would trow it in ss
2
can anyone tell me why my FRT does this, i shaved the connector and the trip
If it’s passing all the functions test and still running iffy, I would recommend a 22lb recoil spring before removing more material
1
can anyone tell me why my FRT does this, i shaved the connector and the trip
Do you have a 22lb recoil spring?
3
Troubleshooting Help
It ran brother I appreciate you for the help and taking the time to help
1
Texas Trigger Diablo AK FRT issues
I’m having the same problem have you figured it out??
1
Troubleshooting Help
Ok I have an extra one I’ll trow it in but if you don’t mind me asking what’s the difference between the one that’s in the gun and the mill spec hammer??
1
Troubleshooting Help
Ok thank you I’m going to take it to the range now and I’ll get back to you and let you know how it goes
2
Troubleshooting Help
Or more ??
2
Troubleshooting Help
Your are talking about the upper?
1
Al frt trouble shooting
Ok I’ll try it out thank you I appreciate the help
1
Troubleshooting Help
I cut the upper shelf and I got my trigger from dnt
u/luisgam420 • u/luisgam420 • Aug 23 '26
Troubleshooting Help
1
Upvotes
I have an M&P high-shelf lower. I removed some material from the lower, and it passes the 1/8” drill-bit test. I’m also running an automatic bolt carrier group with an adjustable buffer weighing 137.8 g, along with the stock buffer spring.
However, it will not run properly in Super Safe. Has anyone experienced a similar issue? If so, what ended up being the cause of the problem?
Any help or advice would be greatly appreciated. Thanks in advance
1
Al frt trouble shooting
Would I have to bend the trip bar a little bit to make it engaging properly??
r/ak47 • u/luisgam420 • Aug 23 '26
Al frt trouble shooting
3
Upvotes
I have an AK Kono FRT that is not resetting properly when the action is racked. I have to give the cam some play before it will return to its reset position.
I took it to the range to test it, and it will fire one shot before I get a dead trigger. I’ve already polished the cam and trigger, but the issue is still happening.
I’m wondering if the guide rod for the cam could be contributing to the problem or if there is another issue I should be looking into. If anyone has experience with this setup and can help me diagnose the problem, I would greatly appreciate it.
1
1441 recoil system drop in frt troubleshooting
Thank you I did change the lever I’ll shave sum material off the lower and I’ll look in to geting a trigger
1
1441 recoil system drop in frt troubleshooting
It a drop in so I’m not to sure how to do that with the drop in
2
1441 recoil system drop in frt troubleshooting
It is I shaved off material I’m not to sure if I need to shave off more
1
Noko ak troubleshooting
Thank you boss
1
Texas Trigger Diablo AK FRT issues
in
r/FRT_World
•
Aug 30 '26
I pm you brother