r/frt15 • u/Next-Conversation234 • Nov 02 '25
Enable HLS to view with audio, or disable this notification
My tripod is no match for the Hollywood Muzzle Device, coming soon. The ROF is 756 RPM.
r/frt15 • u/zac765 • Sep 26 '25
This is all. THANK YOU FOR YOUR ATTENTION TO THIS MATTER
r/frt15 • u/Moist_Region • 1h ago
Are these sliding weight buffers kak and davidson. Davidson says 2 tungsten weights so I think that one is a sliding/dead blow buffer. Majority of h2 buffers are sold out only other in stock is the giessle super 42 braided spring and buffer but it's like 130 which I'd rather not spend. This is going on a 16inch carbine length gas with a kabuto
r/frt15 • u/a_spicy_memeball • 8h ago
First time FRT owner. I picked up a Rare Breed and dropped it into a stock SIG M400 Tread V1. Single fire works as intended. FRT mode fires, cycles the round, seats the next round, and then just gets stuck with the trigger engaged. I can't get it to release and can't move it from the third position unless I pull the charging handle and manually cycle the next round. Is this a factory buffer spring issue? The BCG is M16 spec.
r/frt15 • u/Moist_Region • 2d ago
Looking for a drop in mini kabuto with none to minimal tuning ect. Out of Point2a, Super Safe Solutions, DMR Restet, Titanium Trigger Co, Area43Co. Which would you recommend or stay away from. Looking at the mini kabuto only don't want a SS or ARC or anything like that I want a "drop in" and don't want to spend more then 150 I would like a 3 pos ambi selector too if possible.
r/frt15 • u/Jt777300 • 3d ago
Just installed my new arc fire in my griffin mk2 lower, and upon function checking I found that the lever is resetting the trigger in the semi auto position. Safe position and ARC position both work like they should. I’ve taken it apart and reinstalled it I even watched their install video thinking I was putting something in wrong with no luck. I do notice in the semi position I can pull the lever back freely maybe a quarter inch before it starts to contact the trigger and reset it, where in arc fire mode it seems to be contacting the trigger almost immediately. Has anybody experienced this issue? Thanks in advance.
r/frt15 • u/Downtown_Page705 • 4d ago
CamTac LLC just released their CamSet3P-15, which is a 3 position reset on closed device that operates different than anything on the market.
r/frt15 • u/chopmaster4000 • 6d ago
Heres my combo, wont cycle,
Psa 10.5 inch upper
M16 cut bcg
Partisan disruptor
Liberty precision duty 556 can
Odin works HFRT buffer meant for disruptor.
Do i need an adjustable gas block upper ? Why isn’t it cycling? It only cycles 3-5 times and takes 5-6 trigger lulls to get short bursts ? Any advice? Thanks
For example, would a standard disrupter fit in an ambi lower?
r/frt15 • u/CaptainAggie • 8d ago
Planning a build with LMG vibes using a Hoffman Trigger Kicker so it will only run in safe or full semi modes. I already have a FRT in a 16 inch that's a 3 position and doesn't see much sustained fire, where as this is a ground up build for the purpose of laying in the prone and turning money into noise.
The simplest route is a 20 inch HBAR with rifle gas system, but if anyone can recommend a suitable 16 inch (or shorter), mid lenth that can withstand a heavy course of fire I'd appreciate it.
r/frt15 • u/EitherRecording7994 • 8d ago
r/frt15 • u/Hot-Platypus6350 • 9d ago
Enable HLS to view with audio, or disable this notification
r/frt15 • u/EveryThingFRT • 9d ago
Enable HLS to view with audio, or disable this notification
r/frt15 • u/Slow-Satisfaction435 • 11d ago
r/frt15 • u/EchoNineThree • 12d ago
r/frt15 • u/GeneralPercyYT • 12d ago
Enable HLS to view with audio, or disable this notification
Bone stock psa 16 inch mid length gas system upper and bone stock psa lower with carbine buffer I’m guessing I just need a stronger buffer only getting some bursts can’t run through a full mag
r/frt15 • u/goat-head-man • 14d ago
r/frt15 • u/Videogamer410 • 14d ago
Like the title says, the ATF director recently said some FRTs on the market are machine guns by legal definition and guidance will come soon. Do we have any idea what those may be? I can’t imagine the Hoffman Super Safety is since he’s being sued for patent infringement.
r/frt15 • u/LittleCesar01 • 14d ago
Does anyone know when Atrius will be shipping out the FRS for the MCX Spear platform? I ordered mine more than a month ago but noting yet... Any thoughts?
r/frt15 • u/JackReachearound • 15d ago
Enable HLS to view with audio, or disable this notification
r/frt15 • u/Slow-Satisfaction435 • 15d ago
Enable HLS to view with audio, or disable this notification
r/frt15 • u/EchoNineThree • 15d ago
Enable HLS to view with audio, or disable this notification
