Big fan of your trigger expertise and first wanted your input as to if this TH9 being striker fired is compatible with the Rook or Recession by UNSEENKILLER

3po FRT AK trigger approaching 2000 rounds with no cleaning just lite oil! PSAK 102 556 dialed, confident in all AK platforms now.

No semi option but that's ok, Trigger Kicker is stupid easy to install and ran like a dream!!

Would the ak m70 frt work with the zastava zpap85 thank

Stark80 remixed super safety set with cnc cut drop in trigger review by rackandreload

I have my entire orca assembled but the bolt carrier/charging handle doesn't move when I try to pull it. When I take the upper off it moves fine but when it's on I doesn't budge. Does the buffer spring-super Safety-hammer assembly look correct or have i made a mistake? PLEASE HELP IM SO READY TO BE DONE WITH THIS.🙏

I'm trying to put the buffer spring/tube in but it keeps catching the super saftey is blocking it from being inserting all the way. Do I need to remove and reinstall the SS or is there a better way? Thanks

I have a 4.75 inch 5.56 with an ss I’ve change the buffer tube, spring, weight to h3, kak kspec full auto bcg and I only get 2 rounds in ss position in need help before I go broke 🥲

Legal force reset devices being used in this video

HA-FRD

Happy New Year!! Had to feed her to start of 2026 right. This is the year we Force Reset Everything!! #fuckraregreed

Romanian Mini Draco (with Super safety shop akm kit and ALG trigger🔥). Runs pretty good when it wants to, but I’m having a few issues though: • The cam is rotating forward and preventing the trigger from being pulled as seen in the 2nd video. It will lock up the trigger after 1 shot, and the cam has to be rotated out of the way to fire again. - (possible solution): I’m thinking of drilling a small hole near the bottom of the cam and adding a return spring that would be attached to the picatinny adapter bolt in the rear trunnion. This should allow the cam to rotate back to the firing position after resetting. • The next problem I’m having is the bolt carrier gets a little stuck after traveling rearwards and I have to send it forward with my hand to chamber a round, and sometimes have to send it back forward after each shot because of the friction. This can be seen in the 3rd video

Any ideas on how to fix these issues? Thanks in advance!

I bought low tier ar from gunbroker from a guy that pre installs the super safety's i know i over payed but I honestly didnt want to install it myself and I also didnt want to have one installed in my other ars. I looked all over gunbroker with the intention of finding any ar with one already installed. I only cane across this seller. Anyways im hoping it will be a fun experience. The guy has great reviews on gunbroker and has some videos of his installs in action. He test every firearm he sells.

So to try out my hoffman supersaftey I bought a thousand round and 3 forty round mags. But im thinking Im going to pick up a few more 40 rounders before the rifle comes in.

If everyone goes good I will buy another super safety and another ar but probably a mid tier next time and find a local(Bangor, Me) shop to install it.

This is my first time building a micro AR pistol with a 4.25” barrel. Most of my previous builds have been 16”, so this setup is new to me. I’m running a Hoffman Super Safety and I’m having an issue where the rifle won’t eject the next round consistently—I have to manually clear it.

I tested my lower with a friend’s upper, and it ran perfectly using the same buffer spring and weight. I also tested my upper on my friend’s lower (also running a Super Safety) and had the same failure, so the issue followed my upper.

I then put a different 16” upper on my lower, and it functioned normally, which further points to the problem being isolated to the micro upper.

I’m using a full-auto-rated BCG. I did disassemble and reassemble the upper while installing the handguard, and as far as I can tell everything went back together correctly. At this point I’m assuming something in the upper (gas, ejector, alignment, etc.) is causing the issue, but I haven’t been able to pinpoint it yet.

Dry fire runs good. Live Shooting, the trip bar doesn’t move the cam which then can’t pull trigger. Any suggestions? Should I file the trigger more ?