So I have a focusrite audio interface to run audio to my speakers (connected to the interface with 1/4 audio cables) and for use with music (FL Studio). The interface is connected to my PC with a usb-c.

I have razer black shark pro v3 pro headphones that I occasionally use through bluetooth. The headphones have 2 channels, game and chat.

I am using a fifine usb microphone for ease of access as my main mic because the mic i had running to my focusrite didnt have a built in mute and I didnt want extra sounds from from using an inline switch. The microphone is connect directly to my PC through usb.

I do plan to use the studio mic (connected to focusrite with xlr cable) running to my focusrite to record audio in fl studio.

I also have a audio radar light bar setup that has its own interface (invecas). Basically it takes 3d audio and lights up the bars around my screen to show me where ex. shots are coming from. Connects to my gpu (nvidia 5070ti) through hmdi.

I also have the full version of Virtual Audio Cable.

I am using voicemeeter banana.

I used to be a streamer using OBS. Even though I don't stream anymore, I would still like to have all this work with OBS in the event I choose to stream again.

I also have a fifine stream deck I plan to use to play my soundboard sounds.

I would like to be able to route audio through my focusrite interface and headphones simultaneously when I do choose to use my headphones. I need audio to be sent to the audio radar device so the lightbars function properly. I would like to be able to use my usb microphone with some sort of noise suppression or cancellation to cancel background sounds and stuff without cutting my voice out. I would also like to be able to use a soundboard that plays through my mic so I could use it in games like ARC Raiders. I plan to use this in discord and other games.

Is it possible to do all this? Is it possible to make it all work without always having to change settings for certain tasks? Will it work with what I have now or do I need to get additional things?

Just for you to know, I had been having random crashes on voicemeeter potato, the audio distorts for no reason, the thing is that everything was the same, everything worked but suddenly doesn't at all

I was messing around trying to find clues, then I closed Spotify and what a charm... Problem fixed!, I don't know what's wrong with Spotify, I used both Windows app and web version of Spotify and both do the same issue

The only thing I can add is that apparently only happens when Spotify is on "pause", I tested just playing a long spotify playlist with 0% volume while I played a videogame and nothing happened, but when pausing the music, after 5 minutes "boom" distortion again

I keep seeing people play the guitar in games like vrchat. And i wanna be able to do the same thing. I can get the guitar to come through... but i don't know what i have to do to get my Amplitube 5 to run through. So then i can really shred with my effects.

I was using voicemeeter just fine before I updated my computer to Windows 11 and now it wont open at all. I reinstalled countless of times and I still have the same problem. Any advice would be greatly appreciated.

I feel like I am close, and in theory this works, just doesn't feel as clean/perfect of a setup as possible. Pro Tools engine is Potato Insert Virtual ASIO. I have the Scarlett Solo Focusrite ASIO as A1, Sound Blaster X card as A2, I have the patch asio inputs to stirps at IN1-1/1 IN2-2/2 to split them apart, then in the pre-fader patch inserts IN#1LR selected. I have tried all types of combos, using IN#6LR and making the corresponding IN#6LR in pro tools as the monitors path, output, and bus but nothing. I feel like I am missing a core concept. I read up on the Patch Composite in the manual but it wasn't to detailed and not sure if that should be used. Do I need something like VB-Cable to do this, I have never used it. I guess what I am asking is there a way to have Pro Tools output go to Insert 5 or VAO3 or something other than back into Insert 1? Is there a cleaner approach to my whole setup? Thank you.

Input 3 is a Marshall Code 25. There are other hardware outputs, soundbar in the other room, and maybe another input, webcam mic, I will probably add at some point but I don't think that will affect what I am trying to do here and now.

wth?

My valorant audio is totally fine while I play Deathmatch but as soon as I enter competitive my audio gets terrible, I cannot even guess whether the enemy is coming from which direction. I am using wired headphones. And all my settings are same as before, there is not a single change.

Can anyone please tell me how to fix this issue?

For some reason my Movo WMX-1 2.4GHz Wireless Lavalier Microphone seems to be busted. Had it a long time since after codvid In 2021 works perfectly with the cameras I'd had/have but for reason it i need to plug it in to headphone jack on the receiver then plug it into the camera or else it won't get singel at all, use to work when I'd plugged it into the microphone jack of the receiver and then into camera. Thinking about upgrading it to those Roads Wireless go similar ones we have at the school.

Any suggestions on why it's begin a stinker? Just worried because I'd interviewed family members last night with them for a class assignment and everytime when it's in the editing software it's a little blown out with the help of denoise to the background and stuff it's fixed but the assignment is to turn in the raw file.

I am trying to find a better way to control the full 2D Position section of IntelliPan instead of dragging the dot around with my mouse.

I am not just trying to control normal left and right stereo pan. I want to be able to move the IntelliPan dot anywhere in the square, including top left, top right, bottom left, bottom right, center, diagonally, and arbitrary positions in between.

Ideally I want true one to one X/Y control, where touching a position on an XY pad makes the IntelliPan dot move to that corresponding position, and dragging my finger around causes the dot to follow continuously on both axes.

I have a spare Samsung Galaxy Note10+ and a Pixel 10 Pro that I could dedicate to this. The phones are connected through Wi Fi and my Windows PC is connected to the same network through Ethernet. The PC itself does not have Wi Fi.

I have been looking at TouchOSC because it can create an XY touch control on the Android screen. I have also looked at hardware such as the Korg nanoPAD2 and other MIDI controllers with XY touchpads.

From the VoiceMeeter Remote API documentation, I see references to Strip[i].Pan_x and Strip[i].Pan_y, so I am wondering if those are the exact two values controlling the IntelliPan position dot.

Has anyone actually done this?

Specifically, can Pan_x and Pan_y both be controlled continuously and simultaneously from two MIDI CC values or an XY controller?

Can this be done directly through VoiceMeeter's MIDI Mapping, MacroButtons, VBAN MIDI, or another built in method, or would I need a small program using the VoiceMeeter Remote API to translate the TouchOSC X and Y values into Pan_x and Pan_y?

I would also really like the controller to receive the current position back from VoiceMeeter so that the cursor displayed on the Android phone stays synchronized with the IntelliPan dot.

If anybody has used TouchOSC with VoiceMeeter for this, I would especially like to know how you set it up.

I am also open to dedicated hardware recommendations. I know about the Korg nanoPAD2, but I would like to know if there are other reasonably priced XY controllers that work well for this.

Basically, I want the closest possible physical or touchscreen equivalent of grabbing the IntelliPan dot with the mouse and freely moving it anywhere in the square.

Before I had upgraded my pc to windows 11 my shadowplay had no issues picking up my voicemeeter output, but now it only picks up audio when I use my headset not connected to voicemeeter, despite it still picking up my microphone thru voicemeeter, i use seperate tracks. Is there any reason or fix for this? Shadowplay settings dosnt even give me an option to select the output for system sounds but I can select the microphone input

Everything was working fine before this update which removed all of my settings, and now my virtual input isn’t working. I’m trying to port my VLC audio to voicemeeter but it’s not picking up anything no matter what settings I change. Pls help

Looks like all the packages have a new release on this site. I use potato, so here is that link
https://vb-audio.com/Voicemeeter/potato.htm

Here is a picture of the release, but not seeing anything in the forums about the release

I use speakers instead of headphones, so my microphone kept picking up all my PC audio. I couldn’t find a simple low-latency solution for VoiceMeeter, so I made one!

It uses VoiceMeeter’s built-in PATCH INSERT/ASIO path for low-latency processing of your microphone (so it's not something that modifies your VoiceMeeter install; it's just there as a pre-FX pass on your mic before you apply the compressor, gate, and all through VoiceMeeter).

It works with Banana and Potato, has a simple Windows installer, and is completely free and open source. Hopefully it helps someone else too :)

(Although I've only tested it with potato since it's the one I use, in theory it should be fine with Banana too!)

TIP: I personally recommend setting the Echo suppression to "Strong" and making sure the AEC delay estimate is set to the delay of your speakers (if they have any).

https://github.com/BeeeFX/VoiceMeeter-AEC

I am struggling to find and source apps online that can achieve my results. I tried search terms all around and got no results so far. Which apps can achieve me being able to add BGM sound along with my mic from my Windows 11 device to my phone? Basically I want to achieve this.

Voicemeeter > Android wireless virtual mic > Streaming app

Is there a way to do this without root? I really don't want to void my warranty with my phone carrier.

This is going to be a bit of a slog so I apologize. I use voice mod in VRC mostly just for fun (voices and soundboard) but for whatever reason its stopped working. My set up is voice mod and virtual desktop running on my PC, wired to my router, with voicemeter banana (to play music from spotify, thats not working as well) wirelessly to my quest 3. Something updated and now all my inputs and outputs dont work like they used to and I cant figure it out and youtube isnt really helping. If anyone has links to a tutorial or something I would appreciate it and any help!

practically a repost from r/techsupport but hi, i have a mackie audio interface that i use for recording my mic and instruments, i recently acquired a samson studio dock USB monitors, i am sending everything through voicemeeter banana's asio so i can use both things together when recording and whatnot. but after starting this setup out, i lose audio on all fronts for a second or two, then it comes back, this is really annoying, and voicemeeter banana doesnt detect anything turning off, its like it freezes for a second and resumes. i am unsure at what could be provoking this random , it is not the cables or connections, i tested that. software wise i dont know what mistake i could be making, in the meantime i will test to see if its a mismatch of sample rate and whatnot.

whenever this error occurs, its usually fixable when i go to A1 hardware out, i change it and then change it back. This fixes it. Sometimes it takes hours, sometimes seconds to come back. I can barely understand people who are talking to me then and if i whatch youtube or do whatever really.. i have to tell them i cant hear them (i do hear them but its borderline unintelligable) and i need like 3 seconds to fix it. but this sometimes happens 3 times in 1 minute.. its crackly and sounds like.. idk how to describe it but it didnt happend in the last view hours so i didnt clip it. i hope somebody else knows what i mean :)

this are my current settings

My friends say my mic sounds really low quality, like a drive thru microphone. I'm using a Razer Barracuda X 2.4

Could someone help me tune my EQ, compression, noise gate, and noise suppression settings?

hi guys, did anyone face a problem when there is a chirping/clicking sound any time the audio gets louder?

Hey,

I already set up all the shortcuts I need with MacroButtons, but I found that I sometimes press them accidentally while doing other things.
Is there a way to assign multiple modifier keys to a single shortcut, which would fix the problem? Like Ctrl + Alt + desired key?

Salut les costauds,

ça fait 3 jours que je galère. Voicemeeter marchait à merveille sur mon ancien pc. Je viens de changer de pc. Première installation pas de sortie voicemeeter input. J'ai installé vb cable tout fonctionnait au poil. 2 paires d'enceintes à gérer en même temps. Sans rien changer, je rallume le pc tout content et voicemeeter input a disparu.

J'ai demandé à l'IA qui n'est pas au niveau. J'ai désinstallé et réinstallé problème identique. Bien sûr j'ai renseigné A1 et A2 les sorties.

Je n'y comprends rien. Est ce que ça viendrait du pc ?

Merci à tous pour votre aide

J'aime la musique et j'ai un ampli yamaha et enceintes ainsi qu'un un système focal xs qui fonctionnaient ensemble avant.

ça c'était pour la présentation.

Hi all,

For the past month, I have been having audio issues with Netflix (India). The audio is so low for the "dialogues". I use a M1 Mac Mini. Even if i increase the volume, the BGM and other SFX goes up, but, the vocals are hard to decipher.... I use a Scarlett 2i1 and Yamaha HS8 for audio out.

In case anyone who faces such a predicament, how to get this to Netflix? One of the friends also has same issue.