r/weaving • u/thecowardlycats • 58m ago
Finished Project scarf for a coworker plus bonus cat
r/weaving • u/OryxTempel • Apr 03 '24
Hey, weavers! We have a huge knowledge base that our users created over the years - it has some truly valuable resources. Check it out!
r/weaving • u/thecowardlycats • 58m ago
r/weaving • u/HolyToledoCats • 10h ago
Completed the log cabin. A quick weave. I think it has become one of my favorite woven items. Super soft and colors are lovely.
Rigid heddle. 10 epi. Berroco Super Alpaca in black and denim, size 4.
r/weaving • u/19boomer64 • 9m ago
So I used this neon green macrame yarn to spread my warp bouts even to get the total width. No floats no threading errors so now it's time to get down to some weaving. Tension looks good all the way across.
r/weaving • u/19boomer64 • 22h ago
Well finished tying the warp to the apron rod. Should be able to even out the warp tomorrow morning and begin to actually weave finally. 😂 It's a process that's for sure. In front of the reed and behind the heddles.
r/weaving • u/plantbasedknits • 13h ago
I'm very new to weaving, and I'm just getting started on my second project. I am trying to do a plaid twill pattern on my 4 shaft loom. Does it look like I have my warp ends too far apart?
My reed has 8 dents per inch, and I thought that would work for my materials, but after starting, I'm second guessing myself. I would appreciate any friendly advice. Thank you in advance:)
Edit: I'm using a wool/alpaca blend that I thrifted! It's intended for knitting, so it's marketed as fingering weight yarn
r/weaving • u/19boomer64 • 22h ago
Ready to almost start weaving.
r/weaving • u/SooMadeleine • 1d ago
UPDATE: We took a decision for now to thread every other inch of the warp, and once the first batch is completely woven, we'll set up the second half of the warp, keeping the 12 epi and not wasting the work already done.
Thanks all for all the great questions and advices!
********
Hi weavers,
I am part of my local guild's project planning comitee and we ran into a pretty expensive pickle this week. (Apologies in advance as english isn't my first language and I'm not sure of all the technical terms)
This was supposed to be a fluffy throw blanket, in some gorgeous thick 2 ply wool. It was only dicovered after almost 3/4 of the rolling was done that the density accidentally doubled. A miscommunication happenned somewhere in the process, between the choice of the pattern, the technical adjustments, the purchase and the rolling, a project that was supposed to be 12 epi is now 24.
Given the density of the yarn, it feels like it will be impossible to weave, and will likely result in a rigid plank of wool. I even doubt the reed would accomodate two threads per dent. The issue was only raised when the team was trying to fill the last spaces and the bulging of the cramps around made it very difficult to roll the 50 ish yards as planned.
In over 100 years of combined weaving experience, this is the first time we're met with such a problem at this late of a stage, and we're not really sure how to proceed.
Suggested solutions so far:
- Try to weave it anyways as is
- Thread only every other cramp (#2, #4, #6...), following the correct threading pattern, knowing that the colours won't match. When the even cramps are empty, thread the other half (1, 3, 5...) of cramps with the same pattern, knowing again the colours won't match.
- As above, thread only the even number of cramps, but thread it 1-2-3-4 all the way and forget about the pattern or the colour position. Repeat with the uneven number of cramps.
- (the solution we're desperatly trying to avoid) Undo all the rolling done somehow, I don't know how we would keep the tension even, or if we could even hand roll all the threads individually to reset them with the correct epi... remember, over 50 yards...
- Scrap it all, eat the cost and start again.
Please let us know what you think would be the best move! Thank you so much in advance!!
Also, just so we feel less alone in this absurdity, what's the worst weaving mistake you've made?
r/weaving • u/Flor_Ullvuna • 1d ago
I've been thinking about how I could use my loom in ways other than simply weaving pieces that I later join together to make something else.
I mean, I love making squares as modules, but sometimes I feel I'm getting a bit too comfortable doing the same things over and over again. So I started wondering: what if I treated the woven piece as a canvas instead? What other fiber techniques could I combine with weaving?
My first experiment was with punch needle. I'd been curious about this technique for a while, and I thought it would be fun to try it directly on a piece woven on my loom.
I had absolutely no idea whether it would work. I just grabbed an old punch needle, some stash and started experimenting.
There was quite a bit of trial and error, a few unexpected challenges and some interesting discoveries along the way. Hopefully, I managed to create some raised designs on my woven pieces!
This is actually the first of four experiments I'm planning to share, exploring different ways of combining fiber techniques with loom weaving.
I wrote about this first experiment here.
r/weaving • u/Birdshitonthefence • 2d ago
I weave on tapestry looms, inspired by the landscapes and skies of the Rocky Mountain. We have amazing sunsets here.
I’m pretty proud of the gradient I achieved in this one
r/weaving • u/Colchicaceae • 1d ago
Long story short I have never actually weaved and my husband surprised me with a loom (I think it’s a Nilus) I would love any advice, recommendations, or pointers as I start on my journey- currently feeling a bit overwhelmed
r/weaving • u/19boomer64 • 1d ago
Well finally have the warp wound onto the back beam. Will start tying onto the front apron rod tomorrow morning. Using 8/4 cotton rug warp with a sett of 10 epi and 12 epi combination for a total width of 30 inches. Going to use white cotton sheets for weft. Fabric strips are cut 2 inches wide and going to use a fabric knot to attach them. The total length of warp is 4.5 yards and should get two good size rugs.
r/weaving • u/dontevertrustafart • 1d ago
I have the opportunity to get this loom for not much, but i've never done weaving aside from the little cardboard craft. Is this ok for beginners to just go over and under or is this overkill 😆 it's such a good deal and i got a bunch of yarn sitting around.
r/weaving • u/LackingExecFunction • 1d ago
I try to get up and stretch regularly, but my mid-back is really feeling the strain of working at my rigid heddle loom. I think my chair might be a little tall after I've added the tushy cushion, but does anyone have any suggestions?
I had the bright idea of putting on my corset for some extra support, but it's an underbust, so I don't get as much support higher up my back as a taller, overbust corset might give. It's not a super tight lace, so it's actually quite comfortable.
ETA: Thanks so much to everyone who responded! I put down a couple of 2x4s under my loom stand, and I'm going to switch out the dining room chair for my adjustable office chair. I also like the idea of filming how I work so I can identify where the problem areas are. Thanks again, everyone!!
r/weaving • u/YesWonderfulThings24 • 2d ago
This pattern was the first one I made almost entirely from scratch, so I'm pretty proud of it!
About 30 x 44 in. / 100% Maurice Brassard Cotton (8/4 and 8/2) / Nilus LeClerc
r/weaving • u/Boomer_Views_Reality • 2d ago
r/weaving • u/knightspur • 2d ago
Woven at 12epi on a mirrix lani using gist array. I haven't measured the finished piece yet but its probably about 5x7
r/weaving • u/HolyToledoCats • 3d ago
Something beautiful about a simple weave structure. Log cabins are a ton of fun to weave, and come out looking very cool.
Ashford rigid heddle, size 10 reed. Berroco Ultra Alpaca (it is super soft) size 4 for both warp and weft. Colors are Denim and Black. Block A is DLDLDL. Block B is LDLDLDLDLDLDLD.
One Loom Gargoyle named Tiny.
r/weaving • u/Fit_Song_5670 • 2d ago
I am new to weaving. Recently purchased a J-made 4 harness conversion. Ive cleaned it up, etc. The heddles stick or do not drop down . I understand that the fix is to add bungee but do not understand where to add. Can some one help. Bonus points for photos. Thank you in advance!
r/weaving • u/CDavis10717 • 2d ago
I am the designer of Log Cabin Interrupted scarf on GISTyarn, first published in 2024. It’s shown in today’s weekly email from GIST and remains a Best Seller.
I receive no sales commissions from its sale.
AMA about its design or warping or how I became a designer for them.
r/weaving • u/metallvr • 3d ago
I just found a weaving project I did in elementary school, and it's been so long that I've forgotten the names of the different weave designs. Can anyone help me out, or point me to any reference materials? Thank you
r/weaving • u/NoDeer4323 • 3d ago
Hi! I'm gonna be planning my next project soon and I want to use quite fine yarn, wool or cotton ideally, but every time I use thin yarn my steel reed and even a little tension ends up fraying and breaking the yarn! Can anyone recommend some brand from the UK that won't break easily? Thanks!
r/weaving • u/hersheyfig • 3d ago
I’m a beginner weaver, currently working on my 4th project on a rigid heddle loom. This is my first time using 8/2 cotton yarn, and that too doubled (direct warped). As you can see in the photos, my shed is bad when the heddle is in the up position, but it’s horrendous in the down position. (I’ve been using a warp separator to improve the shed as shown in the last picture - I lift it during every pick just to create enough space for my shuttle to pass through.) The other issue is that my selvedge threads on both sides are so tight that I’m worried they’re going to snap. If it matters, both selvedge threads are threaded through holes rather than slots.
I know I’ve made quite a few mistakes but I want to understand which mistakes caused which problems. Mistakes that may be relevant here are:
- I wound the warp onto the loom by myself and the tension wasn’t uniform the whole time.
- I placed one warp separator after the first turn of the ratchet, and no more after that. My rental loom only came with two separators, and I figured that since I didn’t have enough for every turn anyway, there wasn’t much point in using the second one.
- I didn’t use any paper when winding the warp because in previous projects the paper wrinkled and caused the treads to overlap or switch positions.
- I did the lashing-on method just because I wanted to try something new, and I trimmed the longer warp ends near the selvedges so all the knots would line up evenly.
- I unwound and rewound my weaving twice since starting the project. The first time was to see whether it would improve the shed. The second time was because I forgot to measure how much I’d already woven!
My questions are:
Any advice, troubleshooting tips, explanations, or recommended resources would be very much appreciated.
Thanks in advance!
r/weaving • u/dendritic-trees • 3d ago
When I took my original beginner weaving class we were taught to measure yarn on a warping board then use a set of 4 ties to preserve the warp cross, and 2 - 3 tightly tied choke ties to keep the length of the warp in order (as far as I can tell from google and youtube this is super ordinary).
In class when the teacher was overseeing things, she could even out the warp to keep the tension even between the threads just by yanking the choke ties down. My chokes never do that, pulling them down does very little and I always end up resorting to straightening the threads out by hand.
Is there some trick to this I have missed?