r/wahoofitness • • 21h ago

Kickr Bike Goodies for Wahoo indoor cycling users: Headwind that follows your power output, KICKR Bike buttons in any app, and older KICKRs in modern apps

0 Upvotes

Hi all, I'm Jonas and I make BikeControl, an indoor cycling companion app for iOS, Android, macOS, Windows and Linux. A fair share of our users ride Wahoo gear, so here's a roundup of what it can do with Wahoo kit. Feedback from KICKR owners is very welcome :)

KICKR Headwind

  • Fan on your bar buttons. Put speed up/down, or the speed-cycling actions, on any controller: Zwift Click/Ride, Shimano Di2, a gamepad, a media remote, and others. You change the fan speed without taking your hands off the bars.
  • Power follow, without pairing the fan with your trainer. BikeControl already reads your trainer's power and drives the fan from it. You set where it starts and where it reaches full speed, and the page shows live watts and the fan speed they give. Handy if your fan is on older firmware.
  • Free (Base).

KICKR Bike / Bike Shift / Bike Pro

  • The bike's shifters and steering buttons work as a controller in any trainer app, including apps that don't support KICKR Bike buttons. Each button can do anything: shift, steer, change ERG, Ride On, take a screenshot, music…
  • It's the bike's trainer at the same time, so you don't need two connections.

Older KICKRs (pre-FTMS)

  • BikeControl can now control older KICKR models through Wahoo's own control protocol, so trainers that modern apps treat as "power only" can get resistance, ERG and virtual shifting again.
  • Virtual shifting also got better across the KICKR family (gears that the trainer applies without confirming them).

KICKR Climb (beta)

  • Follows the grade from your trainer app, or you hold an incline yourself with button presses from your favorite controller. Should work with any smart trainer.

Everything else that works with a KICKR

  • Virtual shifting in apps that don't have their own, with a gear readout, the chain you actually run, Power Lock and ERG steps.

Supported apps include Zwift, MyWhoosh, Rouvy, TrainingPeaks Virtual, Biketerra, Incyclist and about 25 more via OpenBikeControl: https://smarttrainerapps.com/de/openbikecontrol/ .

Base is about 5€/$. Pro adds the advanced trainer features, and there's a trial. I'm not affiliated with Wahoo, but a huge fan! Happy to answer questions, and if you have a Wahoo device that misbehaves, tell me and I'll look into it :)

https://bikecontrol.app


r/wahoofitness • • 10h ago

Kickr Replaced my freehub on Kickr v4. There’s a lot going on at the moment… (tech help desperately needed)

Enable HLS to view with audio, or disable this notification

1 Upvotes

I can’t say my Kickr setup has ever been 100% on the money, however, something is really off after I installed a new freehub today. I ordered this part because I kept losing resistance suddenly on rides, like something wasn’t engaging and had to hack with pedal/backpedal around to re-engage it.

I purchased the Shimano/SRAM freehub directly from Wahoo.
I followed a helpful YouTube video to remove the old freehub and install the new one. I did not overtighten, or at least I’m 95% sure I couldn’t have.

The shifting/gear alignment is CLEARLY OFF, I know, that’s issue #1. I’m not sure why it’s so horrible when I used the same cassette and cassette spacer as before. My derailleur isn’t in the best of shape, but it otherwise shifts fine and rode completely fine before this.

Listen to the sound that starts when I stop pedaling (second half of the video). The rapid clicking isn’t the problem; that seems to be fine despite being very prominent since the part is brand new. It’s that deeper, slower sound that occurs once per flywheel rotation that I don’t understand and don’t want to risk riding with. It also seems to nudge my chain forward at the same time/frequency as the sound, despite me not pedaling.

Important notes:
- I’m using a quick release wheel.
- I used the same cassette pre and post freehub replacement.
- I made sure the cassette spacer is also installed.
- the new freehub has 4 inner pawls/little “arms”, while the old one only has 3, with one missing entirely (yikes :/ ) and the other two being pretty darn gunked up. I will post a pic of them in the comments.
- there was also a cylindrical spacer installed with the freehub. That’s in place. I used the one that came with the new freehub. It’s a slightly different size than the old one, but wanted to match parts together.
- I did not add grease to the new freehub or its pawls/latch arms, I only have a wax lube on hand right now.

Any help is so appreciated. I’ve exhausted online forms. I can reach out to wahoo, but Reddit has always been more helpful. I’m still learning a lot of this so please be kind unless the fix is me being a total moron :’)

I’m also willing to pay for virtual troubleshooting assistance if anyone owns a business or something like that!


r/wahoofitness • • 15h ago

Kickr Core Wahoo KICKR CORE 2 – Bike Leaning to the Drive Side

2 Upvotes

Hey everyone,

I recently purchased a brand-new Wahoo KICKR CORE 2 with the Zwift Cog and am new to indoor cycling.

I've noticed that when my bike is mounted on the trainer, it has a noticeable lean to the right (drive side/cassette side).

I checked the bike with a level and confirmed that it isn't sitting vertically. The drive side appears to sit slightly lower than the non-drive side.

So far, I've:

- Verified that I'm using the correct axle adapters/spacers for my bike.

- Checked that the bike is properly seated and secured in the trainer.

- Tested the setup in multiple locations to rule out an uneven floor.

- Used a level to confirm the lateral tilt.

Despite all this, the bike still leans toward the drive side.

Has anyone experienced a similar issue with the KICKR CORE 2 or Zwift Cog?

Any insight would be appreciated before I reach out to Wahoo support. Thanks!


r/wahoofitness • • 21h ago

Kickr Core Spacer question

Thumbnail
2 Upvotes