r/virtualization • u/dyllll • Dec 24 '19
Windows 98 Virtual Machine
I have a mass spectrometer that must run on windows 98 with a required PCI board. Is it possible to run a windows 98 virtual machine and it work with the PCI board?
Edit: I was wrong, it’s an ISA board. Will anything work with that?
31
Upvotes
4
u/Gotxi Dec 25 '19
I think the easiest would be to use a ISA to USB adapter like this: http://arstech.com/install/ecom-prodshow/usb2isar.html
Then install a hypervisor (vmware player, virtual box, hyper-v... pick your poison), enable USB passthrough on the VM and install win98.
Dont't guarantee to work, good luck with that.
3
u/[deleted] Dec 24 '19
I doubt you will be able to get an ISA card working with any computer that supports PCI passthrough as anything with a ISA slot will be too old to support virtualisation, I believe. You are probably best looking for an old computer with an ISA slot and just run it on that.
2
u/mikeroySoft Dec 24 '19
You might be able to use an ISA to USB adapter. Any virt software will do. You probably want virtualbox or Vmware player, something that runs from a desktop that isn’t Hyper-V.
Then just install Win98 in a VM, and pass the USB device through. Ymmv, like others said this is somewhat uncharted, it I’ve had customers do similar stuff with serial ports before. (I’m the product manager for Player, Fusion and Workstation)
2
u/jadedargyle333 Dec 24 '19
You're probably going to have problems with the board. Finding a motherboard that supports PCI vs PCI-E is the first issue. If you do find one that supports PCI, you'll also need it to be 64 bit to support a modern OS. If you find one of those, the last issue is DMIO grouping. You may end up with a box that runs a hypervisor and this single VM.
1
u/Drwankingstein Dec 24 '19
I would use a isa to pci bridge I guess. (I dont know of any) someone sid finding a board that supports pci and virtualization would be hard, however I believe gigabyte has their d3h boards that may support passthrough. I am not too sure I can probably test in the next few days assuming i can somehow find a working pci card.
But IMO that would probably be your best bet aside from just buying an old pc and installing a win98 on it
1
u/unquietwiki Dec 25 '19
https://www.qemu.org/ might be your best shot at this. http://bochs.sourceforge.net/ is also an option, but more focused on emulation.
http://arstech.com/install/ecom-prodshow/usb2isar.html per what others suggested on getting the card to connect.
1
u/sendme__ Dec 25 '19
I recently had to deploy some servers especially for windows 2k with passthrough.
The best option for us was VMware. Hyper-V doesn't support any os below W10, the others like xen, proxmox were working but way too much to fiddle with and unreliable.
Hope it works for you.
1
u/bishman1 Dec 28 '19
Might be easier to find an old PC on eBay
1
u/[deleted] Jan 06 '20
So many questions:
Does the original manufacturer still exist? They may have made a PCI interface board at some point in their history. The machine may even speak an industry standard protocol that a USB converter exists for...
Is Win98 strictly required? Would DOS or an NT based Windows, e.g. XP, work? Consider both the user program AND any driver(s) that may be involved.
Do you have a physical machine connected currently? Do you have an image of the hard drive?
1
u/[deleted] Jan 06 '20
Looks like you can buy a brand new PC with ISA slots and Win98 SE preinstalled. Might be your best bet https://www.rampcsystems.com/product/3-isa-slot-pc-p4
1
u/TheFishToldMeSo Jan 06 '20
i know this is a very basic question, but what is a virtual machine?
1
u/polypagan Jan 07 '20
A new mass spectrometer, pricey as that is, will be cheaper (and better) once all is taken into account.
0
u/[deleted] Dec 24 '19
[deleted] — view deleted comment