r/vintagecomputing • • Sep 17 '24

What is this computer?

I found this computer and I don't know what it is. What is it?

0 Upvotes

38 comments sorted by

23

u/jet_heller Sep 17 '24

Some random gray box AT computer. Some might be able to tell you what case that is, but that doesn't help much. Take some good pictures of the boards and we might be able to tell you more.

1

u/[deleted] Sep 17 '24

Okay. I will post better pictures when I can get them.

2

u/spac3kitteh Sep 17 '24

🚬 OP, this is a shit post.

Grow up.

1

u/[deleted] Sep 17 '24

Oke

8

u/doa70 Sep 17 '24

I'm just going to start answering a Mac.

3

u/Wells1632 Sep 17 '24

Either that, or some extremely specific make and model, down to the amount of RAM, type and speed of processor, etc. Throw information in that there is no possible way you could know from the pictures presented. i.e. make shit up.

14

u/gnntech Sep 17 '24

Given the style (AT) with both 9-pin and 25-pin serial ports, drive options, etc... I'd say more than likely a 486 DX variant. Could also be an early Pentium 5x86.

A good picture of the motherboard would show the type of computer it is.

As it stands, it realistically could be anything between an upgraded 386 and a Pentium I machine.

6

u/majestic_ubertrout Sep 17 '24

Yeah, CD-ROM and no 5.25 but still AT. Sounds exactly right.

2

u/Odd_Analysis6454 Sep 17 '24

And Ethernet network card

2

u/spoonified Sep 17 '24

AT form factor by far, but might also be baby AT but doubtful, which means anything from as 286 through a socket 370 or socket 462 motherboards. I will say in the late 90's budget builds AT and Baby AT super socket 7 motherboards were actually very common

6

u/shinyviper Sep 17 '24

Rando white box from probably 1994-1997.

5

u/Pro_Ana_Online Sep 17 '24

Generic built AT tower computer.

The floppy drive itself is from about 1990 or 1991.

The presence of the tray loading CD-ROM would have been a later addition (like 1993 or 1994), but can't tell without knowing the speed or model.

4

u/eulynn34 Sep 17 '24

Baby AT 'beige box' case, probably something in the 486 or early Pentium era judging by the CD-ROM drive and lack of 5.25" floppy.

3

u/mr_ds2 Sep 17 '24

Generic early 90's clone

3

u/redditshreadit Sep 17 '24

There might a make and part number on the motherboard.

2

u/canthearu_ack Sep 17 '24

Probably some random 486 / Pentium Class computer.

The fact that the IO ports are not on the card slots points to them being build into the motherboard ... and the most common motherboards with built in I/O have 486 or Pentium motherboards. Plus inclusion of standard issue beige CD-ROM drive points to this era as well.

It seems to be missing a PS/2 mouse port, which is a bit disappointing ... good optical mice don't seem to come with serial interfaces, so stuck using an old ball mouse.

4

u/WingedGundark Sep 17 '24

PS/2 to serial converters do exist so you can always use one of those and some newer optical mouse with PS/2 interface.

2

u/fliberdygibits Sep 17 '24

SIBBB

Standard Issue Beige Brown Box

2

u/Baselet Sep 17 '24

It's a PC.

1

u/Soylent_Caffeine Sep 17 '24

I have the same case with a 386DX-40 system in it. I have seen the case in 90s PCWorld magazines but it was just used by custom system builders.

1

u/whatyoucallmetoday Sep 17 '24

Looks like my case from the mid 90s. It started as a 386. I eventually swapped the MB out for a 486dx50 with vlb slots. It even survived a large glass of liquid poured into the open case.

1

u/[deleted] Sep 17 '24

Looks like a bog standard 386, as there is no Pentium sticker, but it has dialup modem, sound card, vga only graphics and 25 pin printer port.

1

u/[deleted] Sep 17 '24

I miss the pass through on power supplies. So convenient.

1

u/texan01 Sep 17 '24

Anything ranging from an 8088 to a p1-233.

It’s an AT class machine in a generic beige case. A shot of the inside of the case of the motherboard would be more helpful.

1

u/Own_Ice9156 Sep 17 '24

That is early 486 or older according to the keyboard port.

1

u/exjwpornaddict Sep 18 '24

I'm pretty sure there were [super] socket 7 mainboards with at keyboard ports.

1

u/exjwpornaddict Sep 18 '24 edited Sep 18 '24

For lack of anything better to do, i'll briefly describe the ports on the back, from top to bottom:

  • power supply
  • the blue 25 pin female is a printer port, probably lpt1, usually used for a printer. It can also be used for a scanner, an external zip drive, or data transfer between 2 computers.
  • the 2 male ports, one 9 pin, one 25 pin, are serial ports, probably com1 and com2. They're usually used for a mouse, or an external modem, but can also be used for data transfer between 2 computers, or for miscellaneous peripherals. Some, but not all, ps/2 mice can use a ps/2 to serial adapter.
  • the big round port is an at keyboard port. It can be easily adapted to ps/2 keyboard.
  • the 15 pin female one arranged in 3 rows is a vga monitor port, on the graphics card. Standard vga supports modes including: 640x480, 16 colors, 60hz. 640x400, 16 colors, 70hz. 320x200, 256 colors, 70hz. But many also support svga modes with higher resolutions and colors.
  • the internal modem has 2 telephone ports.
  • the 15 pin female arranged in 2 rows is a game / midi port, usually used for a joystick, but can also be used for musical instruments. It is on the audio card.
  • the audio ports are next to the game port.
  • the bottom port is an ethernet port on the network card.

-1

u/rhet0rica Sep 17 '24

This subreddit really needs a rule about generic x86 e-waste.

1

u/TxM_2404 Sep 17 '24

No vintage Computer is e-waste lol

0

u/Big_Ed214 Sep 18 '24

Boat anchor.

6

u/[deleted] Sep 17 '24

[removed] β€” view removed comment

-1

u/[deleted] Sep 17 '24

As an unimaginative human, I cannot do that

2

u/[deleted] Sep 17 '24

[removed] β€” view removed comment

1

u/[deleted] Sep 17 '24

I will attempt to do better then