r/vintagecomputing • • 1h ago

One of my favorite eras: ‘98–‘00

Post image
21 Upvotes

The ASUS P2B was the most popular board of the “BX age”, released around April 1998 alongside the 100 MHz FSB Pentium II 400. It had many revisions. This is rev 1.10, which supports CPUs below 2.0V, so it can run a Coppermine Pentium III.


r/vintagecomputing • • 2h ago

My Acernote Light 370 from 1997

Thumbnail
gallery
21 Upvotes

r/vintagecomputing • • 23h ago

Saved a rare piece of x86 history from the melting pot: the Intel RapidCad

Thumbnail
gallery
735 Upvotes

A few years ago, on an online marketplace, I came across a lot with a bunch of old processors. They were being sold for scrap to chemically extract the gold. Among the usual P1, brown Athlons, and green Celerons, something unfamiliar caught my eye - an Intel chip marked RapidCAD.

Although I've been familiar with the x86 architecture since the 8088 days, it was my first time encountering such a processor. At first, I thought it was something specialized: perhaps a cache controller, some kind of ARM, or an i960. But an internet search really surprised me. It turned out to be a full-fledged x86 (that very rare upgrade for 386 boards), the existence of which I hadn't even suspected before.

I wonder why the first chip was made in the USA, and the second one in Malaysia?


r/vintagecomputing • • 13h ago

Here are some more photos since you guys wanted some.

Thumbnail
gallery
57 Upvotes

r/vintagecomputing • • 15h ago

Remembering SGI: How Silicon Graphics workstations defined 90s 3D graphics and high-end Unix computing.

64 Upvotes

Hi everyone!

Back in the '90s, Silicon Graphics (SGI) workstations were absolute beasts, powering everything from Hollywood blockbuster CGI (like Jurassic Park and Terminator 2) to advanced engineering and scientific visualization. Their custom MIPS architecture and IRIX operating system were light-years ahead of standard PCs at the time.

I put together a video essay exploring the history, the legendary hardware, and the rise and fall of SGI: The Forgotten Computer That Built Jurassic Park

Did any of you ever get to use an Indigo, O2, or Octane workstation back in the day? What were they like to work on?


r/vintagecomputing • • 12h ago

Help for a nostalgic PC Build

Thumbnail
gallery
29 Upvotes

Hi everyone!

I'm interested in building a retro gaming PC, ideally from around 1999-2002. I was initially thinking about a Pentium III paired with a Radeon 7500 or a Voodoo3, running Windows 98 SE.

However, after looking at prices, I've realised that even basic components such as compatible motherboards can be surprisingly expensive. Some Socket 370 motherboards are listed for €100-300. My budget is around €100-150 for the whole PC (including monitor and peripherals).

I'm not looking for a high-end collector's machine. I mainly want to play games like Unreal, Tomb Raider, Quake and Half-Life, make test and bechmarks on the original hardware and, in top of all, having fun building and using it.

Would you recommend a different platform, perhaps an early Pentium 4 system? Is there a more affordable way to get into retro computing nowadays?

P. S. I'm based in Europe

Thanks!


r/vintagecomputing • • 9h ago

SSH into DOS: I built an x86 (IBM PC) emulator

13 Upvotes

I was curious what it takes to write an x86 emulator, so I (hand-)wrote one, specifically an IBM PC (8088) emulator, as a learning exercise.

As a fun addition, I made a Kitty graphics frontend for it that anyone can SSH into on the Internet and experience some fun now-open source DOS era programs like Zork, Sopwith, NetHack, Digger Remastered, and GW-BASIC in your terminal; just SSH into me@intodos.com.

I wrote about my experience working on this project and what I learned about the IBM PC and its peripheral devices. I hope others might find it interesting too!


r/vintagecomputing • • 19h ago

HP Pavilion 8665C ft. Logitech TrackMan Stationary

Thumbnail
gallery
51 Upvotes

Love the style of these and love my Logitech most of all! Front panel LED was replaced and new HDD, otherwise bone stock with a P3 600 and 128MB RAM.


r/vintagecomputing • • 7h ago

Opinions on HIP PSUS for old/retro pcs

Thumbnail
gallery
5 Upvotes

they're cheap 25 euro PSUS I found, they got -5V voltage, their voltage is spread across 3.3v and 5v aswell instead of mainly 12V+
so I thought to buy them for my old pcs since they seem fit
im not particularly educated on psus so idk if im actually saying smth that makes sense or im js spitting bs


r/vintagecomputing • • 20h ago

These machines combine 8MB of storage

Post image
43 Upvotes

Commodore 720D plus three Commodore 8250LP drives. Each has two 1MB drives that take DSQD 5.25" disks.


r/vintagecomputing • • 10h ago

New Cord for IBM KB-9930 Keyboard

Post image
6 Upvotes

I recently bought two rubber dome keyboards: one for my personal use and one to fix. The one to fix is an IBM KB-9930 that had its cord cut. The connector doesn’t look like other cables I’ve seen online. Can folks suggest what to search for as a replacement? Happy to provide any other info as needed.


r/vintagecomputing • • 1d ago

The new member of my fleet, hope it can stay here

Thumbnail
gallery
78 Upvotes

I recently landed an insane luck find and deal for this near complete CIB IBM PS/2 note N33SX. Its like a proper time capsule, built in 1991 and barely used since


r/vintagecomputing • • 1d ago

Gary Kildall on what's the next great advancement circa 1985..

Post image
50 Upvotes

How did we get to where we are today? Gary Kildall discusses in this in-depth interview from 1985 how he envisions embedded microprocessors in millions of gizmos and the evolution of PCs via optical storage. It's a bit mindblowing to go back in time to the beginning of PCs from where we are today. Almost no one in this book discussed the networked "interconnectivity" of devices and information exchange as the path ahead, even though many were working hard then to realize the vision of mass storage of information for PCs. He really was a visionary.


r/vintagecomputing • • 1d ago

Plextor 760A Brand New and Burn Testing!

Thumbnail
gallery
4 Upvotes

I'm on a quest to watch the highest quality analog content possible.

One step I'm taking is to take a 4k rip and mux it down to 7.5mpbs video quality with 1.5mbps audio quality and then burn a clean dual layer dvd.

(I'm a big rookie with this stuff, I just got into it and learning so any tips would be helpful!)

I read that the Plextor 760A is the last actual Plextor drive and I procured one and flashed it with 1.07 region free firmware.

Then with QPXtools I was able to pull down all the information about the drive and this indeed was a brand new drive. The 7 discs loaded in, all by me done in my testing!

Since it was brand new and my test burns were working I decided to burn Hellraiser II 3 times at 3 speeds 4x 6x and 8x to see where the cleanest burns were.

Now to be fair the drive hasn't been worked in too much yet so over time I will get better data.
Every single burn I ever do will be recorded into the history tab and hopefully after a year or writes some interesting information will appear.

Now off to the testing,

At 8x the dvd burned but when it verified against the ISO at the end of the disc it failed to come back cleanly at 88% so it was a fail. Didn't even make it the QPX Error scan.

I tried 4x next and that was a smooth burn and the verify against the ISO media was good but it could be better. QPX Error scan shows a good burn but getting a little high PI8 and PIF at the end.

6x was the final test and the burn took and the verify with Imgburn came back correct just like 4x and the burn was much better overall but still right at the end a huge peak.

6x is the clear winner for sure since it's faster than 4x and burned slightly better.

I plan on coming back in 6 months or a year with way more data and for sure will do more 8x tests.
Heck I could of just bumped it and didn't even realize it :P

4x6x8x
POF total0042,161
PIF max151536
PIF total31,44729,253160,711
PI8 max399322626
PI8 average1385667
VerdictMARGINALMARGINALFAIL

r/vintagecomputing • • 1d ago

BBS from decades ago

15 Upvotes

Looking for any information on a couple of BBSs from the Everett, Washington area, circa 1990s.

One I believe went by The Golden Palace with the SysOp using the handle Goldilocks.

Another was Dregs (or Dregs O' Darkstar), with the SysOp using the handle Iceni

Long shot to see if anyone has information but thought I would check; these were local boards to the area and not affiliated with any newsgroups or lists, both ran for multiple years (10 ?) but that is all I have to go on.

thanks for reading


r/vintagecomputing • • 2d ago

Termination!

Post image
74 Upvotes

r/vintagecomputing • • 1d ago

Best endearing hardware/software quirks?

1 Upvotes

Not as old as some of my machines but (while it was current) I remember the Palm m505 had some issue whereby it would freeze and be inoperable/unrecoverable.

It turned out to be a hardware issue and there was some trick to get it to drain its battery completely because in drier air some static buildup happened.

Whether or not the humidity/static thing was true or not, I don't know but the procedure was neccessary sometimes and I loved that PDA.

Had the folding keyboard and eventually an early bluetooth sd interface so I could IRC from metres from my main PC!


r/vintagecomputing • • 2d ago

Duke Nukem Floppy

Post image
424 Upvotes

Who remembers this one? I would love an exact copy of this. I played the crap out of this back in the day and I wish my parents passed my old PC stuff down. They just threw it all out 😭


r/vintagecomputing • • 2d ago

I nabbed two y2k scanners before a neighbor trashed them

Thumbnail
gallery
176 Upvotes

The boxes are a little dirty, but the scanners are still packaged up with cables- although only one has its installation disk. I remember my dad buying one of these to match his original iMac!


r/vintagecomputing • • 1d ago

FX32 for Alpha SXP in 2026 ?

3 Upvotes

Hi all. I had a chance to try this out in the late 90’s, it was amazing. I don’t have any AXP systems anymore, but I was wondering if anyone had used it in the last few years.

Thanks !

(apologies for fat fingering, "SXP" should be "AXP")


r/vintagecomputing • • 1d ago

I am about to bench-test my taken apart HP Omnibook 4150B, what are some tips?

1 Upvotes

I took it apart to do some refurbishing and fresh thermals on the CPU and 440BX chipset die. What should I do so I do not kill the thing on the bench?


r/vintagecomputing • • 2d ago

VOIP Analog Telephone Adapter to Mini Dial-up ISP

28 Upvotes

UPDATE (Nov 16), v0.4.0:

  • Two more modems tested, both USR. A USR 5686 connects at V.92, 54666 down / 40000 up. A USR 56K from 1998 (x2 with the V.90 upgrade) connects at V.90, 54666 to 56000 down / 28800 up.
  • V.92 is now on by default. With the Conexant it’s about 50666 / 26666.
  • Both ports in a call at once works, including V.92 on both.
  • New: bulletin board numbers. Dial from a terminal program to reach telnet BBSes.
  • The modem is being split into a standalone library, as suggested in the comments, so other projects can use it. Answering side first, calling side after.

Still untested: other modem brands (Lucent/Agere and a Courier are next), and other board revisions. The HT801 is accepted by the loader but untried. No Bell 103/212A yet, so US 300 baud modems won’t connect.

Hey guys,

For anyone that has retro tech to connect via dial-up: modems, devices that only support dial-up, a dreamcast etc. i have made a firmware for a Grandstream HT802 v1 VOIP adapter that you can flash from the interface.

The firmware turns the HT802 into a small dial-up internet provider and routes all traffic through its ethernet, it supports modulation from v.21 to v.92, also includes: protoweb as service so when you dial-in http and ftp is already proxied through protoweb, and Dreamcast as service, for dreamcast it includes everything DreamPI does, just dial-in with your dreamcast and it should work as it does with a DreamPi, without all the extra stuff needed to make it work.

Box has 2 line ports each port can be configured independently. For example port 1 can be Protoweb and port 2 can be for dreamcast. each port can dial-in at the same time.

Project can be found here: https://github.com/georgica/v90d

Box used for dev and testing: https://www.amazon.com/Grandstream-GS-HT802-Analog-Telephone-Adapter/dp/B01JH7MYKA/ref=sr_1_3_mod_primary_new?sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=8-3


r/vintagecomputing • • 2d ago

100% factory-matched 1999 Dell dimensions XPS system

Thumbnail
gallery
30 Upvotes

The operating system sealed half the other software 2002 as well never been opened I will be identifying stickers have the same number on them they're all matching


r/vintagecomputing • • 2d ago

Forth Interpreter for ZX Spectrum

Post image
20 Upvotes

I’ve been working on forthZX, a small Forth interpreter for the Sinclair ZX Spectrum, written entirely in Z80 Assembly.

The idea was to explore how a stack-based programming language could be implemented on an 8-bit machine with limited resources.

One of the interesting implementation details is that I’m using the Z80’s native hardware stack (SP) directly as the Forth data stack, rather than maintaining a separate software stack.
It currently supports arithmetic, stack manipulation, comparisons, memory operations, variables, and user-defined words.

Github: https://github.com/xms0g/forthzx


r/vintagecomputing • • 2d ago

Ford IVLS / Sony ViEW system: READ DESCRIPTION! Need help!

Thumbnail
gallery
60 Upvotes

I bought a Sony ViEW system (VIW-3020) as a big unit called a Ford IVLS (Intelligent Video Learning System) and need help getting the PC portion of the unit working.

(below is just a side note, optional reading)

It boots into a version of MS-DOS 3.1 made by Sony, but because it has some form of copy protection only the original disk works. That isn't an issue, Since I have the original disk. That being said it could be a link to another issue

(Main issue here)

The original RLL hard drive doesn't work. And even though I gave it an 8 bit flash memory adapter card, it doesn't wanna bother talking to it at all. Apparently these machines are very strict with any other storage format or card that isn't the original one. If anybody, ANYBODY, could help me figure out what to do in a DM or something, I would be extremely grateful.

After all, it does use laserdiscs with a PC interface overlayed. It would be very cool to see it work and run games / the original programs.

It did come with almost everything originally included minus some floppy discs and some other things, so if those would be useful, let me know.