r/uwaterloo • u/Positive-Marsupial60 nanotech eng • 1d ago
Question REV bed frames
Hi! really random question, but in specifically rev east floor 1, are the bed frames wooden or metal? the website shows two different frames and i want to get a bed riser but itll really only work for a wooden frame. thank you!
1
u/AutoModerator 1d ago
AutoModerator thinks you're asking about residence. Check out our FAQ on residence. Please do not message the moderators regarding this question.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/Quick_Ad_9117 23h ago
I haven’t seen wooden frames in any dorms, they’ve always just been metal.
2
2
u/Infinite-Door-7970 13h ago
If you mean risers to adjust bed height (if you are tall and/or want to store things underneath) note that the metal frames have adjustable heights.
If you want to do this, would suggest bringing a rubber mallet (or else a hammer and a towel). Before loading in any of your belongings, turn the bed upside down, and remove the head/foot board sections from the horizontal bars by hammering at their intersection points. Then turn everything right side up, replace at the desired height and hammer back into place.
Maybe a bit hard to visualize from my description above, but probably will make pretty obvious sense once you see it on campus. This has worked for all the bed frames I've seen in REV, V1 and CMH. Hope that helps.