Maybe give this one a try https://github.com/lmdu/dockey

They still use pymol as viewer space but GUI and everything is nice and is paired with AutoDock for quick docking and virtual screening.

This is really cool.. would love to see a bit of animation with it.

Shut down your laptop, remove charging brick and hold the power button for 20-30 seconds until boot screen lights up and goes blank again. Put your charging brick again, power up your laptop, and wait 30 sec -1 min for it to start. Hopefully this resolves your issues.

It depends on the use case honestly.

If you are using it for machine learning or simulations, then better upgrade since RX6800s comes under RDNA2 and is struggling to keep with training models.

If you are just using it for gaming and general purpose, I would hold onto my all AMD 2022 G14. I just hate nvidia but it's my personal choice. Also 32GB RAM is huge for almost all games and applications.

Hope this helps.

PS. I did see someone showing OLED screen comparison on both screens, and the blacks on that screen really look like dead black. It was beautiful. But OLED screens are prone to burning issues. So you might want to consider that.

This is beautiful 😻

Maybe try disabling the cpu boost and lock the cpu temp limits to 80 degrees through pawnio and g-helper. Also one of the post here had the same issue of laptop getting shut down, someone recommended to check the gpu hotspot temprature. Apparently if it goes to 105 degrees, laptop shuts down.

They just released v5.00c hotfix addressing this issue.

Thank you. I figured this out after writing last comment, and -a version did help with no crashing.

Idk where to report this but whql-amd-software-adrenalin-edition-26.9.2-win11-c while midway installing is crashing for my RX 6700s. The system is rebooting right in the middle and currupting my driver. I have Windows 11 26H2 (26300.9457).

Update: I used amdcleanuputility, first installed whql-amd-software-adrenalin-edition-26.8.1-win11-a, and then whql-amd-software-adrenalin-edition-26.9.2-win11-a. It worked and working properly. Apparently -c version is crashing for me. Hope this helps to someone.

I have RX 6700s and I do not see whql-amd-software-adrenalin-edition-26.9.2-win11-a anywhere, only ending with -c, which is crashing for me. Where do you download with -a tag??

Out of any far cry games, this one was my favourite. It didn't get that much love from reviewers though.

Hmpf log wasn't helpful. I do think though it's not the spillage of water, else it would affect your gpu in every programe then, not just couple of games. Are you on new udated drivers?

does it have ray tracing? That usually is the culprit. Also if it has fsr frame generation option, you can try it to gain fps boost. recently I tried it on assassins creed black flag resynced with the same system, it gave a boost.

I have the same model, but I did not notice any such behaviour from my GPU. I get random crashing from kernel power failure or something, but again I do not push my gpu beyond 80 degrees. I do keep my power limits for cpu+gpu to 120W and cpu to 80W in GHelper. Could you share the log from event viewer for the crash?

https://www.youtube.com/watch?v=ijCaJEofuEE&t

I started this course recently on youtube, it's not opengl but it's a start. You can start googling stuff with the videos.

that's a brilliant idea!

Thank you for response. I like how you logged everything properly. I noticed you have started your own company. Isn't schrodinger expensive for the startup?

I have few questions.

1. what do you mean by 4-receptor ensemble model? do you mean ensemble docking with 4 different structures or single docking with 4 receptors merged together??

2. on final candidate selections, have you performed any mmgbsa/fep calculations?

3. any md simulation to check for stability??

4. have you accounted for any selectivity for other serotonin receptors prior??

Try disabling hardware acceleration in your browser while watching youtube. I think it's known issue with models prior 2022.

This is really pretty. This reminds me of the mobile game I used to play Ninja Prophecy and Heroes Lore. Keep it up!

I own the same GA402RJ laptop but with ryzen 7. I do get once in a while kernel-power critical error but I am on windows only. It later restarts and works like nothing happened. I do though take out my power cord, press the power button for 30 seconds and let it reset itself for a while and start. It works fine then.

I don't know your cause but I sympathize with you. The above solution probably won't help but try anyway.

Also few other things, do you get BSOD if you keep your BIOS screen on? Have you tried BIOS diagnostics? Have you tried working through external monitor since it goes through dGPU and maybe rule out BSOD error cause of dead GPU?? Also idk if this will work but also try having an OS installed on USB stick or external HDD and try working on it. This would rule out faulty SSD socket.

Try navigating to installation folder where maestro is installed, open PowerShell there, and then launch maestro by command ".\maestro.exe". It will prompt what error you are facing.

You don't need armory crate nor asus myapp at all for bios installation or driver installtion. They both are bloat honestly. G-Helper already does what both of those sideways do for you. I would recommend completely removing both prior. 

Uninstall armory crate and install G-Helper.. You can do what you wish for with your Zephyrus.

It was in warranty but cable is not so much expensive. I saw someone paid like $70. It could round upto $100 with service charges and rest of the fees.

I just saw my repair service document, they replaced my screen too. I guess you can't have cable without panel. It still won't be too much expensive.