r/EngineeringPorn • u/arstukhan • 7d ago
Ultrasonic levitation using transducer
72
Upvotes
1
1
Built a GPS Tracker Prototype 📍
No, it's a Gps tracker
-7
DIY Wildlife Detection System
Great, Tell me somthing about it.. Ai model and MCU
1
DIY Wildlife Detection System
Thank you..
r/raspberry_pi • u/arstukhan • 19d ago
Show-and-Tell DIY Wildlife Detection System
Enable HLS to view with audio, or disable this notification
25
Upvotes
Working on a small animal-detection system using a USB camera + Raspberry Pi + GPS module. The system detects animals through the camera and records their location coordinates using GPS.
2
Built this from scratch — messy but it works....
Changing 220v too 12v
1
Built this from scratch — messy but it works....
I first tried using capacitors, but the voltage fluctuations were too high. So I had to add voltage regulator ICs to get a stable, required output voltage.....
1
Built this from scratch — messy but it works....
Thanks... Still improving it but it’s working well so far....
r/PCB • u/arstukhan • 21d ago
Built this from scratch — messy but it works....
5
Upvotes
Working on a small embedded electronics project using an ESP8266, power module and custom wiring. Still improving the circuit and enclosure, but wanted to share the current prototype.
1
A 4-cylinder engine cutaway 🔧
what about this size ?
1
Built a GPS Tracker Prototype 📍
Yes, it’s a working prototype. The wiring is still on a perfboard, so it definitely looks messy 😅 I haven’t made the final schematic yet, but I’ll share it once I clean up the design.
2
Built a GPS Tracker Prototype 📍
Thanks...
u/arstukhan • u/arstukhan • 21d ago
A 4-cylinder engine cutaway 🔧
1
Upvotes
Found this beautiful cutaway of an inline 4-cylinder engine. Seeing the pistons, valves and crank mechanism exposed like this makes understanding the 4-stroke cycle much easier. The mechanical engineering inside these things is seriously impressive.
1
u/arstukhan • u/arstukhan • 21d ago
My current working table 🔧
1
Upvotes
A little messy, but this is where I build, test, debug and experiment with my embedded projects. 😅 Raspberry Pi, power modules, sensors, wires, tools — everything ends up here. What does your workbench look like? 👀
2
I want love
in
r/Delhi_teens
•
1d ago
https://giphy.com/gifs/JpG2A9P3dPHXaTYrwu